arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2409.09970cs.RO
收藏

一种满足形状约束的腱驱动连续机器人非线性模型预测任务空间控制器

A Non-Linear Model Predictive Task-Space Controller Satisfying Shape Constraints for Tendon-Driven Continuum Robots

University of Toronto(多伦多大学)

Maximillian Hachen, Chengnan Shentu, Sven Lilge, Jessica Burgner-Kahrs

AI总结:

针对腱驱动连续机器人狭窄空间作业需求,提出融合标称PCC模型与局部反馈的非线性模型预测任务空间控制器,在仿真和硬件原型上验证了其在位置跟踪、抗扰及形状约束下的优势,可提升遥操作安全性。

摘要:

腱驱动连续机器人(Tendon-Driven Continuum Robots, TDCRs)有望应用于微创手术和工业检测场景,这类场景要求机器人能够进入狭窄受限空间。我们提出一种模型预测控制(Model Predictive Control, MPC)方法,利用TDCRs的非线性运动学与冗余性实现全身避障,具备30Hz输入处理的实时能力。该方法有效性的核心在于将标称分段常曲率(Piecewise Constant Curvature, PCC)模型用于可行轨迹的高效计算,同时结合局部反馈控制器处理建模不确定性与扰动。仿真实验表明,我们的MPC在位置跟踪方面优于传统基于雅可比的控制器,尤其是在存在扰动和用户自定义形状约束的情况下,同时还能纳入控制限制。我们进一步在硬件原型上验证了该方法,展现了其提升遥操作任务安全性的潜力。

英文摘要:

Tendon-Driven Continuum Robots (TDCRs) have the potential to be used in minimally invasive surgery and industrial inspection, where the robot must enter narrow and confined spaces. We propose a Model Predictive Control (MPC) approach to leverage the non-linear kinematics and redundancy of TDCRs for whole-body collision avoidance, with real-time capabilities for handling inputs at 30Hz. Key to our method's effectiveness is the integration of a nominal Piecewise Constant Curvature (PCC) model for efficient computation of feasible trajectories, with a local feedback controller to handle modeling uncertainty and disturbances. Our experiments in simulation show that our MPC outperforms conventional Jacobian-based controller in position tracking, particularly under disturbances and user-defined shape constraints, while also allowing the incorporation of control limits. We further validate our method on a hardware prototype, showcasing its potential for enhancing the safety of teleoperation tasks.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑