一种空心圆柱超声电机的特性分析与设计
Characterization and Design of A Hollow Cylindrical Ultrasonic Motor
AI总结:
针对MRI兼容机器人等场景的驱动需求,本文设计了一种空心圆柱超声电机原型,可直接驱动、消除机械非线性,实验验证其在特定工况下具备可观的转速与扭矩输出。
摘要:
压电超声电机相较于气动、液压电机等其他运动单元,具备结构紧凑、响应速度更快、装置更简单的优势;尤其是其非铁磁特性,相比传统直流电机,与MRI兼容机器人系统的适配性极佳。空心轴电机兼具重量轻(性能与同直径实心轴相当)、转动惯量低、因自重小对旋转不平衡的耐受度高、以及因比质量低可耐受高温的优势。本文提出了一种空心圆柱超声电机(HCM)原型,可实现直接驱动,消除机械非线性,并缩小执行器或末端执行器组件的体积、降低其复杂度。本研究制备了两台等效的HCM,在转子施加50g预压力的条件下,当驱动电压为282$V_{pp}$时,电机转速可达383.3333rpm,输出扭矩为57.3504mNm。
英文摘要:
Piezoelectric ultrasonic motors perform the advantages of compact design, faster reaction time, and simpler setup compared to other motion units such as pneumatic and hydraulic motors, especially its non-ferromagnetic property makes it a perfect match in MRI-compatible robotics systems compared to traditional DC motors. Hollow shaft motors address the advantages of being lightweight and comparable to solid shafts of the same diameter, low rotational inertia, high tolerance to rotational imbalance due to low weight, and tolerance to high temperature due to low specific mass. This article presents a prototype of a hollow cylindrical ultrasonic motor (HCM) to perform direct drive, eliminate mechanical non-linearity, and reduce the size and complexity of the actuator or end effector assembly. Two equivalent HCMs are presented in this work, and under 50g prepressure on the rotor, it performed 383.3333rpm rotation speed and 57.3504mNm torque output when applying 282$V_{pp}$ driving voltage.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。