arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2409.04006cs.RO
收藏

兼容MRI的塑料超声波电机的设计与表征

Design and Characterization of MRI-compatible Plastic Ultrasonic Motor

Worcester Polytechnic Institute(伍斯特理工学院)

Zhanyue Zhao, Charles Bales, Gregory Fischer

AI总结:

本文设计并初步优化了一种高MRI兼容性的塑料压电超声波电机,通过齿数、槽口、边缘和表面处理等参数实验,获得了更优转速与转矩输出。

摘要:

精密外科手术可能受益于利用磁共振成像(MRI)进行的术中影像引导。然而,MRI的强磁场、快速切换梯度以及受限空间,使得需要一种MR引导机器人系统来协助外科医生。压电致动器可利用逆压电效应在MRI环境中用于不同应用目的。压电超声波电机(USM)是一类兼容MRI的致动器,能够以快速响应、紧凑性和简单结构驱动这些机器人。尽管压电电机主要由非铁磁材料制成,但MRI梯度场诱发的涡流会导致磁场畸变,从而产生图像伪影。MRI磁场与涡流产生的磁场之间相互作用所引起的电机振动,会进一步通过产生图像伪影而降低图像质量。在本研究中,开发了一种具有更高MRI兼容程度的塑料压电超声波(USM)电机,并对其进行了初步优化。实验考察了多个参数,即齿数、槽口尺寸、边缘倒角或直边以及表面粗糙度等级参数,并将这些参数与预压力进行对照;结果表明,采用48齿、0.39 mm的薄齿槽、倒角边缘以及使用粒度约为1000的砂纸进行表面处理时,在转速和转矩方面均表现出更好的输出。在该组合下,当预压力较低时,最高转速达到436.6665 rpm;当预压力约为500 g时,最高转矩达到0.0348 Nm。

英文摘要:

Precise surgical procedures may benefit from intra-operative image guidance using magnetic resonance imaging (MRI). However, the MRI's strong magnetic fields, fast switching gradients, and constrained space pose the need for an MR-guided robotic system to assist the surgeon. Piezoelectric actuators can be used in an MRI environment by utilizing the inverse piezoelectric effect for different application purposes. Piezoelectric ultrasonic motor (USM) is one type of MRI-compatible actuator that can actuate these robots with fast response times, compactness, and simple configuration. Although the piezoelectric motors are mostly made of nonferromagnetic material, the generation of eddy currents due to the MRI's gradient fields can lead to magnetic field distortions causing image artifacts. Motor vibrations due to interactions between the MRI's magnetic fields and those generated by the eddy currents can further degrade image quality by causing image artifacts. In this work, a plastic piezoelectric ultrasonic (USM) motor with more degree of MRI compatibility was developed and induced with preliminary optimization. Multiple parameters, namely teeth number, notch size, edge bevel or straight, and surface finish level parameters were used versus the prepressure for the experiment, and the results suggested that using 48 teeth, thin teeth notch with 0.39mm, beveled edge and a surface finish using grit number of approximate 1000 sandpaper performed a better output both in rotary speed and torque. Under this combination, the highest speed reached up to 436.6665rpm when the prepressure was low, and the highest torque reached up to 0.0348Nm when the prepressure was approximately 500g.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑