arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2408.12384astro-ph.IM
收藏

Southern Astrophysical Research Telescope Speckle Instrument的性能

Performance of the Southern Astrophysical Research Telescope Speckle Instrument

Andrei Tokovinin

AI总结:

本文研究了4.1 m SOAR望远镜HRCam speckle成像仪的性能,发现信号裁剪可提升灵敏度,单帧曝光超30 ms无益,换用高端CMOS探测器预计可提升至少一个星等的极限性能。

摘要:

4.1 m Southern Astrophysical Research望远镜上的High Resolution Camera (HRCam) speckle成像仪是一台高产出的仪器,迄今已积累了约40K次观测。本文利用实际数据和包含探测器噪声的真实模拟,研究了其性能(探测到的通量、speckle信号水平、信噪比和极限星等)。在计算speckle功率谱时,信号裁剪对于降低噪声影响和最大化灵敏度至关重要。在宽带I滤光片下,当视宁度从1.6"到0.6"时,将单帧曝光时间增加到30 ms以上并不能改善极限星等,其范围在11.5到14 mag之间。如果将当前的电子倍增CCD替换为具有亚电子读出噪声的高端CMOS探测器,预计可获得至少一个星等的增益。这项研究将有助于规划、执行和自动化HRCam及其他speckle成像仪未来的speckle观测。

英文摘要:

The High Resolution Camera (HRCam) speckle imager at the 4.1 m Southern Astrophysical Research telescope is a highly productive instrument that has accumulated about 40K observations to date. Its performance (detected flux, level of the speckle signal, signal-to-noise ratio, and limiting magnitude) is studied here using both the actual data and realistic simulations, including the detector noise. In the calculation of the speckle power spectrum, signal clipping is essential to reduce the noise impact and maximize the sensitivity. Increasing exposure time of individual frames beyond 30 ms does not improve the limiting magnitude, which ranges from 11.5 to 14 mag under a seeing from 1.6" to 0.6" in the wide-band I filter. A gain of at least one magnitude is expected if the current electron multiplication CCD is replaced by a high-end CMOS detector with a sub-electron readout noise. This study will help in planning, executing, and automating future speckle observations with HRCam and other speckle imagers.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑