arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2407.16167cs.ROcs.SYeess.SY
收藏

运动规划算法中车辆特性的考虑

Consideration of Vehicle Characteristics on the Motion Planner Algorithm

University of Michigan Dearborn(密歇根大学迪尔伯恩分校)

Syed Adil Ahmed, Taehyun Shim

AI总结:

针对现有轨迹规划器未考虑质心高度影响导致不同车辆(尤其是高质心车辆)轨迹非最优的问题,提出一种采用简化双轨模型、基于稳态方程估计侧向和侧倾载荷转移以及简化轮胎模型的规划器,以降低求解器负担,并在高/低加速度条件和不同车辆高度下与粒子模型和运动学模型规划器进行对比。

摘要:

自主车辆控制通常分为两个主要领域:轨迹规划和轨迹跟踪。目前,轨迹规划大多通过粒子或基于运动学模型的优化控制器完成。由于这些规划器不考虑质心高度及其影响,其输出对于不同车辆类型(尤其是高质心车辆)并非唯一。因此,跟踪控制器在尝试实现这些次优轨迹时,可能需要付出较大努力以避免车辆操纵性和舒适性约束。本文尝试通过考虑一种采用简化双轨模型的规划器来解决该问题,该模型利用稳态方程估计侧向和侧倾载荷转移,并采用简化轮胎模型以降低求解器负担。将所开发的规划器与广泛使用的粒子模型和运动学模型规划器在碰撞避免场景下进行对比,涵盖高/低加速度条件和不同车辆高度。

英文摘要:

Autonomous vehicle control is generally divided in two main areas; trajectory planning and tracking. Currently, the trajectory planning is mostly done by particle or kinematic model-based optimization controllers. The output of these planners, since they do not consider CG height and its effects, is not unique for different vehicle types, especially for high CG vehicles. As a result, the tracking controller may have to work hard to avoid vehicle handling and comfort constraints while trying to realize these sub-optimal trajectories. This paper tries to address this problem by considering a planner with simplified double track model with estimation of lateral and roll based load transfer using steady state equations and a simplified tire model to reduce solver workload. The developed planner is compared with the widely used particle and kinematic model planners in collision avoidance scenarios in both high and low acceleration conditions and with different vehicle heights.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑