机器学习辅助热电冷却用于按需多热点热管理
Machine Learning-Assisted Thermoelectric Cooling for On-Demand Multi-Hotspot Thermal Management
AI总结:
本研究提出一种机器学习辅助的热电冷却优化算法,通过CNN与多任务学习预测温度与功耗,结合回溯算法实现多热点全局最优控制,显著降低峰值温度并大幅提升计算速度。
摘要:
热电冷却器(TECs)为先进电子系统中的局部热点直接冷却和主动热管理提供了一种有前景的解决方案。然而,TECs在空间冷却、加热和功耗之间存在显著的权衡。TECs的优化需要大量的模拟,这对于管理具有空间和时间变化的多热点的实际系统来说是不切实际的。在本研究中,我们提出了一种新颖的机器学习辅助优化算法,用于热电冷却器,该算法通过基于整个域内的实时多热点条件单独控制TEC单元,能够实现全局最优温度。我们训练了一个卷积神经网络(CNN),结合了Inception模块和多任务学习(MTL)方法,以理解系统背后的耦合热电物理,并在有无TECs的情况下实现对温度和功耗的准确预测。由于被动热梯度、珀尔帖效应和焦耳效应之间的复杂相互作用,局部最优TEC控制会经历空间温度权衡,这可能不会导致全局最优解。为了解决这个问题,我们开发了一种基于回溯的优化算法,使用机器学习模型迭代所有可能的TEC分配,以获得全局最优解。对于任何具有NHS热点的m×n矩阵(n, m ≤ 10, 0 ≤ NHS ≤ 20),我们的算法能够在后台迭代数十次温度预测的同时,平均在1.64秒内提供52.4%的峰值温度降低及其相应的TEC阵列控制。这代表了与传统有限元方法(FEM)策略相比超过三个数量级的速度提升,后者大约需要27分钟。
英文摘要:
Thermoelectric coolers (TECs) offer a promising solution for direct cooling of local hotspots and active thermal management in advanced electronic systems. However, TECs present significant trade-offs among spatial cooling, heating and power consumption. The optimization of TECs requires extensive simulations, which are impractical for managing actual systems with multiple hotspots under spatial and temporal variations. In this study, we present a novel machine learning-assisted optimization algorithm for thermoelectric coolers that can achieve global optimal temperature by individually controlling TEC units based on real-time multi-hotspot conditions across the entire domain. We train a convolutional neural network (CNN) with a combination of the Inception module and multi-task learning (MTL) approach to comprehend the coupled thermal-electrical physics underlying the system and attain accurate predictions for both temperature and power consumption with and without TECs. Due to the intricate interaction among passive thermal gradient, Peltier effect and Joule effect, a local optimal TEC control experiences spatial temperature trade-off which may not lead to a global optimal solution. To address this issue, we develop a backtracking-based optimization algorithm using the machine learning model to iterate all possible TEC assignments for attaining global optimal solutions. For any m by n matrix with NHS hotspots (n, m <= 10, 0<= NHS <= 20), our algorithm is capable of providing 52.4% peak temperature reduction and its corresponding TEC array control within an average of 1.64 seconds while iterating through tens of temperature predictions behind-the-scenes. This represents a speed increase of over three orders of magnitude compared to traditional FEM strategies which take approximately 27 minutes.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。