arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2403.09895cs.CEcs.NAmath.NA
收藏

利用TUBA粘聚单元突破复合材料分层建模中的粘聚区限制

Overcoming the cohesive zone limit in the modelling of composites delamination with TUBA cohesive elements

Giorgio Tosti Balducci, Boyang Chen

AI总结:

本文提出并验证了满足C1连续性的三角形薄板基底单元及兼容粘聚单元,在I型分层中可使用大至粘聚区11倍的单元仍准确预测极限载荷与裂纹扩展,突破了传统粘聚单元对细密网格的限制。

摘要:

复合材料结构在航空航天工业中的广泛采用需要可靠的数值方法来考虑各种损伤机制的影响,其中包括分层。粘聚单元是一种通用且在物理上具有代表性的分层建模方式。然而,使用其与实体基底单元一致的标准形式时,在狭窄的粘聚区内需要多个单元,从而要求极其细密的网格,并阻碍了其在实际场景中的适用性。本工作重点研究三角形薄板基底单元及与之兼容的粘聚单元的实现与测试,这些单元在域内满足C1连续性。改进的正则性满足了来自Kirchhoff Plate Theory的连续性要求,三角形形状则允许与复杂几何形状保持一致。整个模型针对I型分层进行了验证,这是粘聚区最小的情况。使用大至粘聚区11倍的单元,实现了对极限载荷和裂纹扩展阶段的高精度预测。

英文摘要:

The wide adoption of composite structures in the aerospace industry requires reliable numerical methods to account for the effects of various damage mechanisms, including delamination. Cohesive elements are a versatile and physically representative way of modelling delamination. However, using their standard form which conforms to solid substrate elements, multiple elements are required in the narrow cohesive zone, thereby requiring an excessively fine mesh and hindering the applicability in practical scenarios. The present work focuses on the implementation and testing of triangular thin plate substrate elements and compatible cohesive elements, which satisfy C1-continuity in the domain. The improved regularity meets the continuity requirement coming from the Kirchhoff Plate Theory and the triangular shape allows for conformity to complex geometries. The overall model is validated for mode I delamination, the case with the smallest cohesive zone. Very accurate predictions of the limit load and crack propagation phase are achieved, using elements as large as 11 times the cohesive zone.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑