arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2403.05356cs.CE
收藏

考虑局部应力比的复合材料层合板渐进高周疲劳建模

Modeling of progressive high-cycle fatigue in composite laminates accounting for local stress ratios

P. Hofman, F. P. van der Meer, L. J. Sluys

AI总结:

本文提出并验证了一种结合XFEM、混合模式疲劳内聚区模型和自适应循环跳跃的数值框架,用于模拟复合材料开孔层合板在考虑局部应力比和热残余应力下的高周疲劳渐进失效。

摘要:

针对复合材料准各向同性开孔层合板的实验,验证了一种用于模拟高周疲劳载荷下渐进失效的数值框架。采用混合模式疲劳内聚区模型对横向基体开裂和分层进行建模,涵盖裂纹萌生与扩展。此外,使用扩展有限元法(XFEM)模拟任意位置的横向基体裂纹和劈裂。采用自适应循环跳跃方法高效模拟高周疲劳,同时考虑存在热残余应力时局部应力比的变化。该循环跳跃方案集成在XFEM框架中,其中局部应力比用于确定裂纹的插入和疲劳损伤的扩展。疲劳内聚区模型基于S-N曲线,仅需静态材料属性和少量疲劳参数,并在简单断裂测试试件上进行标定。模拟结果表明,在疲劳寿命和损伤演化方面与实验具有良好的一致性。

英文摘要:

A numerical framework for simulating progressive failure under high-cycle fatigue loading is validated against experiments of composite quasi-isotropic open-hole laminates. Transverse matrix cracking and delamination are modeled with a mixed-mode fatigue cohesive zone model, covering crack initiation and propagation. Furthermore, XFEM is used for simulating transverse matrix cracks and splits at arbitrary locations. An adaptive cycle jump approach is employed for efficiently simulating high-cycle fatigue while accounting for local stress ratio variations in the presence of thermal residual stresses. The cycle jump scheme is integrated in the XFEM framework, where the local stress ratio is used to determine the insertion of cracks and to propagate fatigue damage. The fatigue cohesive zone model is based on S-N curves and requires static material properties and only a few fatigue parameters, calibrated on simple fracture testing specimens. The simulations demonstrate a good correspondence with experiments in terms of fatigue life and damage evolution.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑