用于应变和温度传感的高温多模态传感器的气溶胶喷射打印
Aerosol Jet Printing of High-Temperature Multimodal Sensors for Strain and Temperature Sensing
AI总结:
本文采用气溶胶喷射打印金与ITO纳米颗粒墨水,制备可同时测量应变和温度、耐540 °C的多模态传感器,并实现温度效应原位补偿。
摘要:
将多种传感能力集成到单个多模态传感器中,可极大拓展其在原位传感和结构健康监测中的应用。然而,多模态传感器的制造十分复杂,并受到可用材料和现有制造方法的限制,这些方法通常涉及复杂且昂贵的制造工艺。本研究通过气溶胶喷射打印金和ITO纳米颗粒墨水,展示了一种高温多模态传感器。该打印的多模态传感器可同时进行应变和温度传感,具有2.54的高应变系数和55.64 V/°C的热电势,并兼具高达540 °C的优异高温热稳定性。与传统的单模态传感器相比,该打印的多模态传感器利用微米级打印图案显著提高了传感容量和空间分辨率。研究还表明,集成热电偶的应变传感器能够原位补偿温度对应变传感的影响,显著提高高温下的应变测量精度。通过将气溶胶喷射打印与纳米材料墨水相结合,可以开发种类广泛的多功能器件,以服务于众多新兴应用。
英文摘要:
Integrating multiple sensing capabilities into a single multimodal sensor greatly enhances its applications for in-situ sensing and structural health monitoring. However, the fabrication of multimodal sensors is complicated and limited by the available materials and existing manufacturing methods that often involve complex and expensive fabrication processes. In this study, a high-temperature multimodal sensor is demonstrated by aerosol jet printing of gold and ITO nanoparticle inks. The printed multimodal sensor for concurrent strain and temperature sensing possesses a high gauge factor of 2.54 and thermopower of 55.64 V/°C combined with excellent high-temperature thermal stability up to 540 °C. Compared to traditional single-modality sensors, the printed multimodal sensor significantly increases sensing capacity and improves spatial resolution using microscale printed patterns. The study also demonstrates that the strain sensor with integrated thermocouple enables in-situ compensation of the temperature effect on strain sensing, significantly improving strain measurement accuracy at high temperatures. By combining aerosol jet printing with nanomaterial inks, a wide range of multifunctional devices can be developed for a broad range of emerging applications.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。