气溶胶喷印银导电率实用极限的探讨
Approaching the Practical Conductivity Limits of Aerosol Jet Printed Silver
摘要:
之前直接写入导电金属的努力仅集中在需要剧烈烧结(>200 °C)的纳米颗粒墨水悬浮液上,并导致电导率<大块金属25%的低密度、小颗粒团聚体。在这里,我们展示了反应性油墨溶液的气溶胶喷射印刷,并表征了高密度(93%)印刷的银迹线,其具有接近体电导率和大于电子平均自由程的晶粒尺寸,同时仅需要低温(80 °C)处理。我们已经开发了一个预测电子输运模型,该模型将微观结构与测得的电导率相关联,并确定了一种接近印刷金属实际电导率极限的策略。我们对晶界和弯曲度如何影响电阻率的分析,为基础材料科学提供了深入了解,这些材料科学决定了油墨配方设计师或工艺开发人员如何提高导电性。传输线的测量验证,电气性能保持高达20 GHz,这表明该技术的印刷射频组件的实用性。这项工作揭示了一种生产坚固的印刷电子产品的新方法,该方法保留了快速原型和三维制造的优势,同时实现了在航空航天和通信行业取得成功所需的性能。
英文摘要:
Previous efforts to directly write conductive metals have been narrowly focused on nanoparticle ink suspensions that require aggressive sintering (>200 °C) and result in low-density, small-grained agglomerates with electrical conductivities <25% of bulk metal. Here, we demonstrate aerosol jet printing of a reactive ink solution and characterize high-density (93%) printed silver traces having near-bulk conductivity and grain sizes greater than the electron mean free path, while only requiring a low-temperature (80 °C) treatment. We have developed a predictive electronic transport model which correlates the microstructure to the measured conductivity and identifies a strategy to approach the practical conductivity limit for printed metals. Our analysis of how grain boundaries and tortuosity contribute to electrical resistivity provides insight into the basic materials science that governs how an ink formulator or process developer might approach improving the conductivity. Transmission line measurements validate that electrical properties are preserved up to 20 GHz, which demonstrates the utility of this technique for printed RF components. This work reveals a new method of producing robust printed electronics that retain the advantages of rapid prototyping and three-dimensional fabrication while achieving the performance necessary for success within the aerospace and communications industries.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。