使用位层乘累加器的高效FIR滤波
Efficient FIR filtering with Bit Layer Multiply Accumulator
AI总结:
本文提出利用权重位级稀疏性的无乘法BLMAC点积方法,并在大量I型FIR滤波器与AMD FPGA设计上验证其可显著减少加法数、资源占用并实现兆级采样吞吐。
摘要:
位层乘累加器(Bit Layer Multiplier Accumulator,BLMAC)是一种无需乘法即可执行点积的高效方法,它利用了权重的位级稀疏性。通过系统地扫描截止频率并将抽头数从55变化到255,共生成了1,980,000个低通、高通、带通和带阻I型FIR滤波器。在将其系数量化为16位后,使用BLMAC应用滤波器平均需要约123.3至约513.6次加法,具体取决于抽头数。针对AMD FPGA设计了一台专用于127抽头FIR滤波器的BLMAC点积机器。该设计占用约110个LUT,包括系数和样本存储,并且平均能够在约232个时钟周期内应用滤波器。这意味着根据FPGA系列的不同,滤波速率为1.4–3.4 Msamples/s。
英文摘要:
Bit Layer Multiplier Accumulator (BLMAC) is an efficient method to perform dot products without multiplications that exploits the bit level sparsity of the weights. A total of 1,980,000 low, high, band pass and band stop type I FIR filters were generated by systematically sweeping through the cut off frequencies and by varying the number of taps from 55 to 255. After their coefficients were quantized to 16 bits, applying the filter using a BLMAC required, on average, from ~123.3 to ~513.6 additions, depending on the number of taps. A BLMAC dot product machine, specialised for 127 taps FIR filters, was designed for AMD FPGAs. The design footprint is ~110 LUTs, including coefficient and sample storage and is able to apply the filter in ~232 clock cycles on average. This implies a filtering rate of 1.4-3.4 Msamples/s, depending on the FPGA family.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。