arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2402.14945physics.app-ph
收藏

一种基于图像的迁移学习方法,利用原位加工数据预测激光粉末床熔融增材制造Ti-6Al-4V的力学性能

An image-based transfer learning approach for using in situ processing data to predict laser powder bed fusion additively manufactured Ti-6Al-4V mechanical properties

Qixiang Luo, John D. Shimanek, Timothy W. Simpson, Allison M. Beese

AI总结:

本研究提出一种基于图像的迁移学习方法,利用原位光电二极管信号和预训练DCNN提取特征,高精度预测激光粉末床熔融Ti-6Al-4V的强度与延展性,为实时闭环控制提供可能。

摘要:

减轻增材制造(AM)工艺中的材料缺陷对于其制造零件的可靠性至关重要,而这需要通过建模可用的构建监测信号与最终力学性能之间的复杂关系来实现。为此,本研究探讨了一种机器学习方法,利用原位光电二极管加工信号预测通过激光粉末床熔融(PBF-LB)增材制造技术制造的Ti-6Al-4V的力学性能。样品在不同的加工参数下制造,改变激光功率和扫描速度,以探究广泛的微观结构和性能变化。在制造过程中收集光电二极管数据,随后将其排列为图像格式,并通过迁移在大规模计算机视觉基准图像数据库上预训练的深度卷积神经网络(DCNN)结构和权重,将其提取为信息密集的向量。然后使用提取的特征来训练和测试一个新设计的力学性能回归模型。研究发现,平均交叉验证准确率在预测极限抗拉强度时为98.7%(r²值为0.89),所研究样品的极限抗拉强度范围为900至1150 MPa;在预测断裂伸长率时为93.1%(r²值为0.96),断裂伸长率范围为0至17%。因此,凭借高准确率和硬件加速的推理速度,我们证明了迁移学习框架可用于基于PBF-LB中的加工信号预测金属增材制造部件的强度和延展性,展示了在工业应用中实现PBF-LB实时闭环控制和工艺优化的潜在途径。

英文摘要:

The mitigation of material defects from additive manufacturing (AM) processes is critical to reliability in their fabricated parts and is enabled by modeling the complex relations between available build monitoring signals and final mechanical performance. To this end, the present study investigates a machine learning approach for predicting mechanical properties for Ti-6Al-4V fabricated through laser powder bed fusion (PBF-LB) AM using in situ photodiode processing signals. Samples were fabricated under different processing parameters, varying laser powers and scan speeds for the purpose of probing a wide range of microstructure and property variations. Photodiode data were collected during fabrication, later to be arranged in image format and extracted to information-dense vectors by the transferal of deep convolutional neural network (DCNN) structures and weights pre-trained on a large computer vision benchmark image database. The extracted features were then used to train and test a newly designed regression model for mechanical properties. Average cross-validation accuracies were found to be 98.7% (r2 value of 0.89) for the prediction of ultimate tensile strength, which ranged from 900 to 1150 MPa in the samples studied, and 93.1% (r2 value of 0.96) for the prediction of elongation to fracture, which ranged from 0 to 17%. Thus, with high accuracy and hardware accelerated inference speeds, we demonstrate that a transfer learning framework can be used to predict strength and ductility of metal AM components based on processing signals in PBF-LB, illustrating a potential route toward real-time closed-loop control and process optimization of PBF-LB in industrial applications.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑