arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2401.15217physics.plasm-ph
收藏

负三角变形先导堆的垂直稳定性评估

Assessment of vertical stability for negative triangularity pilot plants

S. Guizzo, A. O. Nelson, C. Hansen, F. Logak, C. Paz-Soldan

AI总结:

本文评估负三角变托卡马克先导堆的垂直稳定性,揭示其相较正三角变的稳定性劣势,并证明优化布置被动导电板可将增长率降至基线16%。

摘要:

负三角变(NT)托卡马克构型可能更容易受到磁流体动力学不稳定性的影响,这给近期以其优良特性为核心的反应堆设计带来挑战,这些特性包括改善的约束以及无边缘局域模运行。在本工作中,我们评估具有NT成形的等离子体的垂直稳定性,并提出潜在的反应堆解决方案。当与共形壁耦合时,已证实NT平衡的垂直稳定性低于等效的正三角变(PT)构型。与PT不同,其垂直稳定性在较高极向β值时会下降。此外,低纵横比下垂直稳定性的改善并不能迁移到NT几何结构中。NT平衡在PT真空室中可被稳定,原因是外侧等离子体与壁之间距离更近;但研究发现该情形并不可取,因为垂直间隙减小,使控制恢复的空间裕度变小。相反,我们证明,通过合理布置被动导电板,可使NT构型的垂直稳定性得到改善,达到与PT情形预期稳定性指标相当的水平。文中给出了高拉长比NT装置中被动板的最优设置:位于装置外侧的板可将垂直不稳定性增长率降至其基线值的16%。对于较低目标拉长比,将被动稳定器与偏滤器概念集成,可显著改善垂直稳定性。装置内侧的板在NT几何结构中也具有独特可行性,为垂直稳定线圈与被动稳定器的空间分离提供了机会。

英文摘要:

Negative triangularity (NT) tokamak configurations may be more susceptible to magneto-hydrodynamic instability, posing challenges for recent reactor designs centered around their favorable properties, such as improved confinement and operation free of edge-localized modes. In this work, we assess the vertical stability of plasmas with NT shaping and develop potential reactor solutions. When coupled with a conformal wall, NT equilibria are confirmed to be less vertically stable than equivalent positive triangularity (PT) configurations. Unlike PT, their vertical stability is degraded at higher poloidal beta. Furthermore, improvements in vertical stability at low aspect ratio do not translate to the NT geometry. NT equilibria are stabilized in PT vacuum vessels due to the increased proximity of the plasma and the wall on the outboard side, but this scenario is found to be undesirable due to reduced vertical gaps which give less spatial margin for control recovery. Instead, we demonstrate that informed positioning of passively conducting plates can lead to improved vertical stability in NT configurations on par with stability metrics expected in PT scenarios. An optimal setup for passive plates in highly elongated NT devices is presented, where plates on the outboard side of the device reduce vertical instability growth rates to 16% of their baseline value. For lower target elongations, integration of passive stabilizers with divertor concepts can lead to significant improvements in vertical stability. Plates on the inboard side of the device are also uniquely enabled in NT geometries, providing opportunity for spatial separation of vertical stability coils and passive stabilizers.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑