理解负载纳米与微米颗粒的有机相变材料光学充能中的光热与熔化机制
Understanding Photo-thermal and Melting Mechanisms in Optical Charging of Nano and Micro Particles Laden Organic PCMs
AI总结:
本文通过实验对比有无热致变色辅助的颗粒负载有机PCM光学充能,揭示热致变色微胶囊可将液相温差由约24°C降至约4°C,实现近恒温充能。
摘要:
在潜热储存领域,光学充能已成为一种很有前景的太阳热潜热储存途径。然而,该技术仍处于发展初期,需要进一步研究才能迈向下一阶段,即实现基于光学充能的实际系统。设计高效的光学充能过程,反过来又要求对入射太阳辐射能进行高效的光热能量转换、传递以及储存。本工作是破译、量化并理解光学充能过程所涉及上述步骤的决定性一步。具体而言,研究精心设计了实验,以考察复合相变材料(负载颗粒的有机PCM)在有无热致变色辅助条件下的光学充能。时空温度分布曲线表明,在负载非热致变色颗粒(碳烟纳米颗粒)的PCM进行光学充能时,液相中的温度 spread(温差)显著较高,可达约24 °C;相比之下,负载热致变色颗粒(微胶囊)的PCM仅约为4 °C。温度 spread 的大小代表其偏离恒温光学充能的程度,清楚表明:与负载非热致变色颗粒的PCM相反,负载热致变色颗粒的PCM可以实现近乎恒温的光学充能。此外,在没有热致变色辅助的光学充能情况下,温度 spread、峰值温度和熔化速率均随颗粒浓度增加而增大;而在后一种情况下,尽管温度 spread 和峰值温度几乎与浓度无关,但熔化速率确实依赖于颗粒浓度。
英文摘要:
The realm of latent heat storage has witnessed emergence of optical charging as a promising route of solar thermal latent heat storage. However, it is still in its initial stages of development and warrants further investigations to take it to the next level i.e., realization of optical charging based real-world systems. Engineering efficient optical charging process in turn necessitates efficient photo-thermal energy conversion, transfer as well as storage of the incident solar radiant energy. The present work is a determining step in deciphering, quantifying, and understanding the aforementioned steps involved in the optical charging process. In particular, experiments have been designed carefully to investigate optical charging of composite-PCMs (particles laden organic PCMs) with and without thermochromism assistance. Spatial-temporal temperature distribution curves reveal that temperature spread (in the liquid phase) in case of optical charging of non-thermochromic particles (carbon soot nanoparticles) laden PCMs is significantly high (as high as approximately 24 °C) relative to that observed in case of thermochromic particles (microcapsules) laden PCMs (approximately, 4 °C). The magnitude of the temperature spread (being representative of the deviation from thermostatic optical charging) clearly points out that opposed to non-thermochromic laden PCMs, nearly thermostatic optical charging can be achieved in case of thermochromic particles laden PCMs. Furthermore, in case of optical charging without thermochromic assistance, the temperature spread, peak temperatures and the melting rates increase with increase in particles concentration. Whereas, in the latter case, although the temperature spread and peak temperatures are nearly independent; the melting rates do depend on the particles concentration.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。