In this study, we carry out a non-perturbative approach to a quantum Otto engine, employing an Unruh-DeWitt particle detector to extract work from a quantum Klein-Gordon field in an arbitrary globally hyperbolic curved spacetime. We broaden the scope by considering the field in any quasi-free state, which includes vacuum, thermal, and squeezed states. A key aspect of our method is the instantaneous interaction between the detector and the field, which enables a thorough non-perturbative analysis. We demonstrate that the detector can successfully extract positive work from the quantum Otto cycle, even when two isochoric processes occur instantaneously, provided the detector in the second isochoric process receives a signal from the first interaction. This signaling allows the detector to release heat into the field, thereby the thermodynamic cycle is completed. As a demonstration, we consider a detector at rest in flat spacetime and compute the work extracted from the Minkowski vacuum state.
We propose a relativistic quantum Otto cycle between an entangled state of two qubits and their composite excited (or ground) state whose efficiency can be greater than the usual single qubit quantum Otto engine. The hot and cold reservoirs are constructed by providing uniform accelerations to these qubits along with the interaction between the background field and individual qubits. The efficiency, as measured from one of the qubits' frame, not only depends on the energy gap of the states but also the relative acceleration between them. For lower acceleration of our observer's qubit compared …
We investigate the Unruh quantum Otto heat engine with level degeneracy. An effectively two level system, where the ground state is non-degenerate and the excited state is $n$-fold degenerate, is acting as the working substance, and the vacuum of massless free scalar field serves as a thermal bath via the Unruh effect. We calculate the heat and work at each step of the Unruh quantum Otto cycle and study the features of the heat engine. The efficiency of the heat engine depends only on the excited energy values of the two level system, not on its level degeneracy. However, the degeneracy acts a…
Uniformly accelerated frame mimics a thermal bath whose temperature is proportional to the proper acceleration. Using this phenomenon we give a detailed construction of an Otto cycle between two energy eigenstates of a system, consists of two entangled qubits. In the isochoric stages the thermal bath is being provided via the vacuum fluctuations of the background field for a monopole interaction by accelerating them. We find that making of Otto cycle is possible when one qubit is accelerating in the right Rindler wedge and other one is moving in the left Rindler wedge; i.e. in anti-parallel mo…
We investigate the behaviour of quantum heat engines, in which a qubit is put through the quantum equivalent of the Otto cycle and the heat reservoirs are due to the Unruh effect. The qubit is described by an Unruh--DeWitt detector model coupled quadratically to a scalar field and alternately to a fermion field. In the cycle, the qubit undergoes two stages of differing constant acceleration corresponding to thermal contact with a hot and cold reservoir. Explicit conditions are derived on the accelerations required for this cycle to have positive work output. By analytically calculating the det…
Efficiency Enhancement up to Unity in a Generalized Quantum Otto Engine: Comparative Analysis with Conventional Quantum Otto Engine Utilizing a Two-Qubit Heisenberg XXZ Chain
We introduce a quantum heat engine performing an Otto cycle by using the thermal properties of the quantum vacuum. Since Hawking and Unruh, it has been established that the vacuum space, either near a black hole or for an accelerated observer, behaves as a bath of thermal radiation. In this work, we present a fully quantum Otto cycle, which relies on the Unruh effect for a single quantum bit (qubit) in contact with quantum vacuum fluctuations. By using the notions of quantum thermodynamics and perturbation theory we obtain that the quantum vacuum can exchange heat and produce work on the qubit…
Recent experimental breakthroughs produced the first nano heat engines that have the potential to harness quantum resources. An instrumental question is how their performance measures up against the efficiency of classical engines. For single ion engines undergoing quantum Otto cycles it has been found that the efficiency at maximal power is given by the Curzon-Ahlborn efficiency. This is rather remarkable as the Curzon-Alhbron efficiency was originally derived for endoreversible Carnot cycles. Here, we analyze two examples of endoreversible Otto engines within the same conceptual framework as…
We suggest alternative quantum Otto engines, using heat bath algorithmic cooling with partner pairing algorithm instead of isochoric cooling. Liquid state nuclear magnetic resonance systems in one entropy sink are considered as working fluids. Then, the extractable work and thermal efficiency are analyzed in detail for four-stroke and two-stroke type of quantum Otto engines. The role of heat bath algorithmic cooling in these cycles is to use a single entropy sink instead of two. Also, this cooling algorithm increases the power of engines reducing the time required for one cycle.
We derive the probability distribution of the efficiency of a quantum Otto engine. We explicitly compute the quantum efficiency statistics for an analytically solvable two-level engine. We analyze the occurrence of values of the stochastic efficiency above unity, in particular at infinity, in the nonadiabatic regime and further determine mean and variance in the case of adiabatic driving. We finally investigate the classical-to-quantum transition as the temperature is lowered.
We construct an entangled quantum Otto engine based on spin-1/2 systems undergoing Dzyaloshinski-Moriya (DM) interaction within a varying magnetic field. We investigate the influence of the DM interaction on basic thermodynamic quantities, including heat transfer, work done, and efficiency and find that the DM interaction importantly influences the engine's thermodynamics. We obtain an expression for engine efficiency, finding it to yield the same efficiency for antiferromagnetic and ferromagnetic coupling. A new upper bound, nontrivially consistent with the second law of thermodynamics, is de…
We investigate quantum Otto engine and refrigeration cycles of a time-dependent harmonic oscillator operating under the conditions of maximum $Ω$-function, a trade-off objective function which represents a compromise between energy benefits and losses for a specific job, for both adiabatic and nonadiabatic (sudden) frequency modulations. We derive analytical expressions for the efficiency and coefficient of performance of the Otto cycle. For the case of adiabatic driving, we point out that in the low-temperature regime, the harmonic Otto engine (refrigerator) can be mapped to Feynman's ratchet…
We propose a quantum Otto cycle based on the properties of a two-level system in a realistic out-of-thermal-equilibrium electromagnetic field acting as its sole reservoir. This steady configuration is produced without the need of active control over the state of the environment, which is a non-coherent thermal radiation, sustained only by external heat supplied to macroscopic objects. Remarkably, even for non-ideal finite-time transformations, it largely over-performs the standard ideal Otto cycle, and asymptotically achieves unit efficiency at finite power.
We consider a quantum Otto cycle operating between two squeezed thermal reservoirs. The influences of the squeezing degree on the optimization performance of quantum Otto heat engines and refrigerators are investigated. We demonstrate that under symmetric condition, the efficiency at maximum power (EMP) of heat engines and the coefficient of performance (COP) at maximum \c{hi} criterion of refrigerators are equal to Curzon-Ahlborn (CA) efficiency and CA COP, respectively. We also found that under asymmetric condition, the EMP of heat engines can be improved when the squeezing degree of hot the…
Abstract We perform an experiment in which a quantum heat engine works under two reservoirs, one at a positive spin temperature and the other at an effective negative spin temperature i.e., when the spin system presents population inversion. We show that the efficiency of this engine can be greater than that when both reservoirs are at positive temperatures. We also demonstrate the counter-intuitive result that the Otto efficiency can be beaten only when the quantum engine is operating in the finite-time mode.
Recent theoretical and experimental studies in quantum heat engines show that, in the quasi-static regime, it is possible to have higher efficiency than the limit imposed by Carnot, provided that engineered reservoirs are used. The quasi-static regime, however, is a strong limitation to the operation of heat engines, since infinitely long time is required to complete a cycle. In this paper we propose a two-level model as the working substance to perform a quantum Otto heat engine surrounded by a cold thermal reservoir and a squeezed hot thermal reservoir. Taking advantage of this model we show…
We consider a finite-time Otto engine operating on a quantum harmonic oscillator and driven by shortcut-to-adiabaticity (STA) techniques to speed up its cycle. We study its efficiency and power when internal friction, time-averaged work, and work fluctuations are used as quantitative figures of merit, showing that time-averaged efficiency and power are useful cost functions for the characterization of the performance of the engine. We then use the minimum allowed time for validity of STA protocol relation to establish a physically relevant bound to the efficiency at maximum power of the STA-dr…
We demonstrate how a quantum Otto engine (QOE) can be implemented using a single ion and an always-on thermal environment. The internal degree of freedom of the ion is chosen as the working fluid, while the motional degree of freedom can be used as the cold bath. We show, that by adiabatically changing the local magnetic field, the work efficiency can be asymptotically made unity. We propose a projective measurement of the internal state of the ion that mimics the release of heat into the cold bath during the engine cycle. In our proposal, the coupling to the hot and the cold baths need not be…
We study a four-stroke Otto engine whose working fluid is a quantum Ising chain. The thermodynamic cycle consists in sweeps of the transverse magnetic field occurring in thermal isolation, alternated by thermalisation strokes with reservoirs at different temperatures. The system-environment coupling is modelled in a thermodynamically consistent way by means of a nonlocal Lindblad master equation. We show that the engine may operate in four different operation modes, depending on the various parameters, in particular it can act as a heat engine and as a refrigerator. We detect an enhancement of…
We investigate the quantum thermodynamic cycle of a quantum heat engine carrying out an Otto thermodynamic cycle. We use the thermal properties of a moving heat bath with relativistic velocity with respect to the cold bath. As a working medium, we use a two-level system and a harmonic oscillator that interact with a moving heat bath and a static cold bath. In the current work, the quantum heat engine is studied in the high and low temperatures regime. Using quantum thermodynamics and the theory of open quantum system we obtain the total produced work, the efficiency and the efficiency at maxim…
We investigate a heat engine with a finite length Kitaev chain in an Otto cycle. Finite size effects are taken into account using method of Hill's nano-thermodynamics as well as using the method of temperature dependent energy levels. We distinguish the bulk and boundary contributions to the efficiency and the work output of Kitaev chain engine and identify them as non-Otto heat engine and refrigerator cycles, respectively. Possibility of separately running Otto engine cycles associated with the bulk and the whole system, and an Otto refrigerator at the boundary is pointed out. It is found tha…
We analyze the performance of a quantum Otto cycle, employing time-dependent harmonic oscillator as the working fluid undergoing sudden expansion and compression strokes during the adiabatic stages, coupled to a squeezed reservoir. First, we show that the maximum efficiency that our engine can achieve is 1/2 only, which is in contrast with the earlier studies claiming unit efficiency under the effect of squeezed reservoir. Then, we obtain analytic expressions for the upper bound on the efficiency as well as on the coefficient of performance of the Otto cycle. The obtained bounds are independen…
We study two-mode bosonic engines undergoing an Otto cycle. The energy exchange between the two bosonic systems is provided by a tunable unitary bilinear interaction in the mode operators modeling frequency conversion, whereas the cyclic operation is guaranteed by relaxation to two baths at different temperature after each interacting stage. By means of a two-point-measurement approach we provide the joint probability of the stochastic work and heat. We derive exact expressions for work and heat fluctuations, identities showing the interdependence among average extracted work, fluctuations and…
The working substance fueling a quantum heat engine may contain coherence in its energy basis, depending on the dynamics of the engine cycle. In some models of quantum Otto heat engines, energy coherence has been associated with entropy production and quantum friction. We considered a quantum Otto heat engine operating at finite time. Coherence is generated and the working substance does not reach thermal equilibrium after interacting with the hot heat reservoir, leaving the working substance in a state with residual energy coherence. We observe an interference-like effect between the residual…
We consider the optimization of the work output and fluctuations of a finite-time quantum Otto heat engine cycle consisting of compression and expansion work strokes of unequal duration. The asymmetry of the cycle is characterized by a parameter $r_u$ giving the ratio of the times for the compression and expansion work strokes. For such an asymmetric quantum Otto engine cycle, with working substance chosen as a harmonic oscillator or a two-level system, we find that the optimal values of $r_u$ maximising the work output and the reliability (defined as the ratio of average work output to its st…
Conducting an open quantum system towards a desired steady state through reservoir engineering is a remarkable task that takes dissipation and decoherence as tools rather than impediments. Here we develop a collisional model to implement reservoir engineering for the one-dimensional harmonic motion of a trapped ion. Our scheme is based on the pulsed interaction between the vibrational mode and the electronic levels of a trapped ion, which is promoted by resolved-sideband lasers. Having multiple internal levels, we show that multiple reservoirs can be engineered, allowing for more efficient syn…
In finite-time quantum heat engines, some work is consumed to drive a working fluid accompanying coherence, which is called `friction'. To understand the role of friction in quantum thermodynamics, we present a couple of finite-time quantum Otto cycles with two different baths: Agarwal versus Lindbladian. We solve them exactly and compare the performance of the Agarwal engine with that of the Lindbladian engine. In particular, we find remarkable and counterintuitive results that the performance of the Agarwal engine due to friction can be much higher than that in the quasistatic limit with the…
The quantum heat engines have drawn much attention due to miniaturization of devices recently. We study the dynamics of the quantum Otto heat engine using the driven-dissipative Schrödinger equation. Starting from different initial states, we simulate the time evolutions of the internal energy, power and heat-work conversion efficiency. The initial state impacts on these thermodynamic quantities before the Otto cycle reaches stable. In the transition period, the efficiency and power may be higher or lower than the corresponding values in the cyclostationary state. Remarkably, the efficiency co…
At a discrete set of magic angles, twisted bilayer graphene has been shown to host extraordinarily flat bands, correlated insulating states, unconventional superconductivity, and distinct Landau level degeneracies. In this work, we design a highly efficient quantum Otto engine using a twisted bilayer graphene sample. Flat bands, which occur at magic angles, make the prospect of extracting useful work from our Otto engine lucrative. We use an eight-band continuum model of twisted bilayer graphene to compute efficiencies and work outputs for magic and non-magic angle twists, and compare the resu…
We study a quantum Otto engine at finite time, where the working substance is composed of a two-level system interacting with a harmonic oscillator, described by the quantum Rabi model. We obtain the limit cycle and calculate the total work extracted, efficiency, and power of the engine by numerically solving the master equation describing the open system dynamics. We relate the total work extracted and the efficiency at maximum power with the quantum correlations embedded in the working substance, which we consider through entanglement of formation and quantum discord. Interestingly, we find …
We consider a semi-classical heat engine with a $q$-deformed quantum oscillator working substance and classical thermal baths. We investigate the influence of the quantum statistical deformation parameter $q$ on the work and efficiency of the engine. In usual heat engines, a Hamiltonian parameter is varied during the work injection and extraction stages while the quantum statistical character of the working substance remains fixed. We point out that even if the Hamiltonian parameters are not changing, work can be harvested by quantum statistical changes of the working substance. Work extractio…
Graphene is perhaps the most prominent "Dirac material," a class of systems whose electronic structure gives rise to charge carriers that behave as relativistic fermions. In multilayer graphene several crystal sheets are stacked such that the honeycomb lattice of each layer is displaced along one of the lattice edges. When subject to an external magnetic field, the scaling of the multilayer energy spectrum with the magnetic field, and thus the system's thermodynamic behavior, depends strongly on the number of layers. With this in mind, we examine the performance of a finite-time endoreversible…
In this paper, we study the role and relevance of the cost for an invariant-based shortcut to adiabaticity enabled qubit heat engine operates in a quantum Otto cycle. We consider a qubit heat engine with Landau-Zener Hamiltonian and improve its performance using the Lewis-Riesenfeld invariant-based shortcut to adiabaticity method. Addressing the importance of cost for better performance, the paper explores its relationship with the work and efficiency of the heat engine. We analyze the cost variation with the time duration of non-adiabatic unitary processes involved in the heat engine cycle. T…
Equivalence of Discrete and Continuous Otto-Like Engines assisted by Catalysts: Mapping Catalytic Advantages from the Discrete to the Continuous Framework
University of Gdańsk（格但斯克大学）；Los Alamos National Laboratory（洛斯阿拉莫斯国家实验室）
Certain solutions of Einstein's equations in anti-de Sitter spacetime can be engineered, using extended gravitational thermodynamics, to yield `holographic heat engines', devices that turn heat into useful mechanical work. On the other hand, there are constructions (both experimental and theoretical) where a series of operations is performed on a small quantum system, defining what are known as `quantum heat engines'. We propose that certain holographic heat engines can be considered models of quantum heat engines, and the possible fruitfulness of this connection is discussed. Motivated by fea…
