Photoacoustic tomography (PAT) is a promising imaging technique that can visualize the distribution of chromophores within biological tissue. However, the accuracy of PAT imaging is compromised by light fluence (LF), which hinders the quantification of light absorbers. Currently, model-based iterative methods are used for LF correction, but they require significant computational resources due to repeated LF estimation based on differential light transport models. To improve LF correction efficiency, we propose to use Fourier neural operator (FNO), a neural network specially designed for solving differential equations, to learn the forward projection of light transport in PAT. Trained using paired finite-element-based LF simulation data, our FNO model replaces the traditional computational heavy LF estimator during iterative correction, such that the correction procedure is significantly accelerated. Simulation and experimental results demonstrate that our method achieves comparable LF correction quality to traditional iterative methods while reducing the correction time by over 30 times.
University of California, San Diego（加利福尼亚大学圣迭戈分校）；Qualcomm Institute, University of California, San Diego（加利福尼亚大学圣迭戈分校高通研究所）
Low fluence illumination sources can facilitate clinical transition of photoacoustic imaging because they are rugged, portable, affordable, and safe. However, these sources also decrease image quality due to their low fluence. Here, we propose a denoising method using a multi-level wavelet-convolutional neural network to map low fluence illumination source images to its corresponding high fluence excitation map. Quantitative and qualitative results show a significant potential to remove the background noise and preserve the structures of target. Substantial improvements up to 2.20, 2.25, and 4…
Recently we demonstrated an integrated photoacoustic (PA) and ultrasound (PAUS) system using a kHz-rate wavelength-tunable laser and a swept-beam delivery approach. It irradiates a medium using a narrow laser beam sweeping at high repetition rate over the desired imaging area, in contrast to the conventional PA approach using broad beam illumination at a low repetition. One significant advantage of this approach is that the fundamental problem of decoupling local light absorption at a point from optical fluence at the same point can be solved. Here, we present a fluence compensation method and…
Filtered backprojection (FBP) is an efficient and popular class of tomographic image reconstruction methods. In photoacoustic tomography, these algorithms are based on theoretically exact analytic inversion formulas which results in accurate reconstructions. However, photoacoustic measurement data are often incomplete (limited detection view and sparse sampling), which results in artefacts in the images reconstructed with FBP. In addition to that, properties such as directivity of the acoustic detectors are not accounted for in standard FBP, which affects the reconstruction quality, too. To ac…
Rensselaer Polytechnic Institute（伦斯勒理工学院）；Michigan State University（密歇根州立大学）
Photoacoustic tomography seeks to reconstruct an acoustic initial pressure distribution from the measurement of the ultrasound waveforms. Conventional methods assume a-prior knowledge of the sound speed distribution, which practically is unknown. One way to circumvent the issue is to simultaneously reconstruct both the acoustic initial pressure and speed. In this article, we develop a novel data-driven method that integrates an advanced deep neural network through model-based iteration. The image of the initial pressure is significantly improved in our numerical simulation.
We have developed a multimodal photoacoustic remote sensing (PARS) microscope combined with swept source optical coherence tomography for in vivo, non-contact retinal imaging. Building on the proven strength of multiwavelength PARS imaging, the system is applied for estimating retinal oxygen saturation in the rat retina. The capability of the technology is demonstrated by imaging both microanatomy and the microvasculature of the retina in vivo. To our knowledge this is the first time a non-contact photoacoustic imaging technique is employed for in vivo oxygen saturation measurement in the reti…
The quality of the reconstructed photoacoustic image largely depends on the amount of photoacoustic (PA) boundary data available, which in turn is proportional to the number of detectors employed. In case of limited data (owing to less number of detectors due to cost/instrumentation constraints), the reconstructed PA images suffer from artifacts and are often noisy. In this work, for the first time, a deep learning based model was developed to super resolve and denoise the photoacoustic sinogram data. The proposed method was compared with existing nearest neighbor interpolation and wavelet bas…
George Mason University（乔治梅森大学）；The MITRE Corporation（MITRE公司）
Photoacoustic tomography (PAT) is a nonionizing imaging modality capable of acquiring high contrast and resolution images of optical absorption at depths greater than traditional optical imaging techniques. Practical considerations with instrumentation and geometry limit the number of available acoustic sensors and their view of the imaging target, which result in significant image reconstruction artifacts degrading image quality. Iterative reconstruction methods can be used to reduce artifacts but are computationally expensive. In this work, we propose a novel deep learning approach termed pi…
George Mason University（乔治梅森大学）；The MITRE Corporation（MITRE公司）
In photoacoustic tomography (PAT), the acoustic pressure waves produced by optical excitation are measured by an array of detectors and used to reconstruct an image. Sparse spatial sampling and limited-view detection are two common challenges faced in PAT. Reconstructing from incomplete data using standard methods results in severe streaking artifacts and blurring. We propose a modified convolutional neural network (CNN) architecture termed Dense Dilation UNet (DD-UNet) for correcting artifacts in 3D PAT. The DD-Net leverages the benefits of dense connectivity and dilated convolutions to impro…
Idier et al. [IEEE Trans. Comput. Imaging 4(1), 2018] propose a method which achieves superresolution in the microscopy setting by leveraging random speckle illumination and knowledge about statistical second order moments for the illumination patterns and model noise. This is achieved without any assumptions on the sparsity of the imaged object. In this paper, we show that their technique can be extended to photoacoustic tomography. We propose a simple algorithm for doing the reconstruction which only requires a small number of linear algebra steps. It is therefore much faster than the iterat…
For photoacoustic image reconstruction, certain parameters such as sensor positions and speed of sound have a major impact in the reconstruction process and must be carefully determined before data acquisition. Uncertainties in these parameters can lead to errors produced by a modeling mismatch, hindering the reconstruction process and severely affecting the resulting image quality. Therefore, in this work we study how modeling errors arising from uncertainty in sensor locations affect the images obtained by matrix model-based reconstruction algorithms based on time domain and frequency domain…
Photoacoustic computed tomography (PACT) combines the optical contrast of optical imaging and the penetrability of sonography. In this work, we develop a novel PACT system to provide real-time imaging, which is achieved by a 120-elements ultrasound array only using a single data acquisition (DAQ) channel. To reduce the channel number of DAQ, we superimpose 30 nearby channels' signals together in the analog domain, and shrinking to 4 channels of data (120/30=4). Furthermore, a four-to-one delay-line module is designed to combine these four channels' data into one channel before entering the sin…
Histological images are critical in the diagnosis and treatment of cancers. Unfortunately, the current method for capturing these microscopy images require resource intensive tissue preparation that delays diagnosis for many days to a few weeks. To streamline this process, clinicians are limited to assessing small macroscopically representative subsets of tissues. Here, we present a combined photoacoustic remote sensing (PARS) microscope and swept source optical coherence tomography (SS-OCT) system designed to circumvent these diagnostic limitations. The proposed multimodal microscope provides…
In photoacoustic tomography (PAT) with flat sensor, we routinely encounter two types of limited data. The first is due to using a finite sensor and is especially perceptible if the region of interest is large relative to the sensor or located farther away from the sensor. In this paper, we focus on the second type caused by a varying sensitivity of the sensor to the incoming wavefront direction which can be modelled as binary i.e. by a cone of sensitivity. Such visibility conditions result, in the Fourier domain, in a restriction of both the image and the data to a bow-tie, akin to the one cor…
ShanghaiTech University（上海科技大学）；University of Chinese Academy of Sciences（中国科学院大学）
Photoacoustic imaging (PAI) is a non-invasive imaging modality that detects the ultrasound signal generated from tissue with light excitation. Photoacoustic computed tomography (PACT) uses unfocused large-area light to illuminate the target with ultrasound transducer array for PA signal detection. Limited-view issue could cause a low-quality image in PACT due to the limitation of geometric condition. The model-based method is used to resolve this problem, which contains different regularization. To adapt fast and high-quality reconstruction of limited-view PA data, in this paper, a model-based…
Revisiting the joint estimation of initial pressure and speed-of-sound distributions in photoacoustic computed tomography with consideration of canonical object constraints
German Cancer Research Center (DKFZ)（德国癌症研究中心（DKFZ））；Heidelberg University（海德堡大学）；Heidelberg University Hospital（海德堡大学医院）
Purpose: Photoacoustic tomography (PAT) is a novel imaging technique that can spatially resolve both morphological and functional tissue properties, such as the vessel topology and tissue oxygenation. While this capacity makes PAT a promising modality for the diagnosis, treatment and follow-up of various diseases, a current drawback is the limited field-of-view (FoV) provided by the conventionally applied 2D probes. Methods: In this paper, we present a novel approach to 3D reconstruction of PAT data (Tattoo tomography) that does not require an external tracking system and can smoothly be integ…
Coordinate-based Speed of Sound Recovery for Aberration-Corrected Photoacoustic Computed Tomography
Northwestern University（西北大学）；California Institute of Technology（加州理工学院）；Tsinghua University（清华大学）；NSF-Simons AI Institute for the Sky (SkAI)（NSF-模拟斯通AI天空研究所（SkAI））
Estimation of blood oxygenation with spectroscopic photoacoustic imaging is a promising tool for several biomedical applications. For this method to be quantitative, it relies on an accurate method of the light fluence in the tissue. This is difficult deep in heterogeneous tissue, where different wavelengths of light can experience significantly different attenuation. In this work, we developed a new deep neural network to simultaneously estimate the oxygen saturation in blood vessels and segment the vessels from the surrounding background tissue. The network was trained on estimated initial p…
Scalable photoacoustic tomography implementations accounting for the spatial impulse response of transducers
Université de Toulouse, CNRS（图卢兹大学）；UPS（艾克斯-马赛大学）；Aix Marseille Univ, CNRS, Institut de Mathématiques de Marseille（索邦大学）；Sorbonne Université, CNRS, Inserm, Laboratoire d’Imagerie Biomédicale, LIB（科学技术研究局）；Agency for Science, Technology and Research（南洋理工大学）；Nanyang Technological University（新加坡国立大学）；National University of Singapore
University of Oulu（奥卢大学）；University College London（伦敦大学学院）
Biomedical photoacoustic tomography, which can provide high resolution 3D soft tissue images based on the optical absorption, has advanced to the stage at which translation from the laboratory to clinical settings is becoming possible. The need for rapid image formation and the practical restrictions on data acquisition that arise from the constraints of a clinical workflow are presenting new image reconstruction challenges. There are many classical approaches to image reconstruction, but ameliorating the effects of incomplete or imperfect data through the incorporation of accurate priors is c…
Fast algorithms enabling optimization and deep learning for photoacoustic tomography in a circular detection geometry
Research Unit of Mathematical Sciences, University of Oulu（奥卢大学数学科学研究所）；Department of Computer Science, University College London（伦敦大学学院计算机科学系）；Department of Mathematics, University of Arizona（亚利桑那大学数学系）；Department of Technical Physics, University of Eastern Finland（东部芬兰大学技术物理系）
Photoacoustic (PA) imaging is an emerging hybrid imaging modality that combines rich optical spectroscopic contrast and high ultrasonic resolution and thus holds tremendous promise for a wide range of pre-clinical and clinical applications. Compact and affordable light sources such as light-emitting diodes (LEDs) and laser diodes (LDs) are promising alternatives to bulky and expensive solid-state laser systems that are commonly used as PA light sources. These could accelerate the clinical translation of PA technology. However, PA signals generated with these light sources are readily degraded …
Photoacoustic imaging has shown great potential for guiding minimally invasive procedures by accurate identification of critical tissue targets and invasive medical devices (such as metallic needles). The use of light emitting diodes (LEDs) as the excitation light sources accelerates its clinical translation owing to its high affordability and portability. However, needle visibility in LED-based photoacoustic imaging is compromised primarily due to its low optical fluence. In this work, we propose a deep learning framework based on U-Net to improve the visibility of clinical metallic needles w…
