Photonic spin-orbit (SO) coupling is an important physical mechanism leading to numerous interesting phenomena in the systems of microcavity photons and exciton-polaritons. We report the effect of SO coupling in a tunable open-access microcavity embedded with anisotropic active media. The SO coupling associated with the TE-TM splitting results in an emergent anisotropy, which further leads to fine energy splittings allowing clear observation of the full set of eigenstates, in sharp contrast with the isotropic situation which leads to the isotropic eigenstates of spin vortices. We show that the photonic potential can be engineered by playing with the relation between the emergent anisotropy and the cavity ellipticity. All the experimental results are well reproduced by the degenerate perturbation theory. Our results constitute a significant extension to the research field of microcavity spinoptronics, with potential applications in polarization control and optical property measurement of photonic devices and materials.
Spectral manifestations of hybrid Tamm-microcavity modes in a 1D photonic crystal bounded with a silver layer and containing a nematic liquid crystal layer working as a microcavity have been studied using numerical simulation. It is demonstrated that the hybrid modes can be effectively tuned owing to the high sensitivity of the liquid crystal to the temperature and external electric field variations. It is established that the effect of temperature on the transmission spectrum of the investigated structure is most pronounced at the point of the phase transition of the liquid crystal to the iso…
We have developed a technique for realizing a two-dimensional quadrupolar microcavity with its deformation variable from 0% to 20% continuously. We employed a microjet ejected from a noncircular orifice in order to generate a stationary column with modulated quadrupolar deformation in its cross section. Wavelength red shifts of low-order cavity modes due to shape deformation were measured and were found to be in good agreement with the wave calculation for the same deformation, indicating the observed deformation is quadrupolar in nature.
We report controllable manipulation of slow and fast light in a whispering-gallery-mode (WGM) microtoroid resonator fabricated from Erbium (Er3+) doped silica. We observe continuous transition of the coupling between the fiber-taper waveguide and the microresonator from undercoupling to critical coupling and then to overcoupling regimes by increasing the pump power even though the spatial distance between the resonator and the waveguide was kept fixed. This, in turn, enables switching from fast to slow light and vice versa just by increasing the optical gain. An enhancement of delay of two-fol…
Complex optical systems such as high-quality microcavities enabled by advanced lithography and processing techniques paved the way to various light-matter interactions (LMI) studies. Without lattice-matching constraints in epitaxy, coating techniques or shaky open cavity constructions, sub-micrometer-precise lithographic development of a polymer photoresist paves the way to polymer microcavity structures for various spectral regions based on the material's transparency and the geometrical sizes. We introduce a new approach based on 3D nanowriting in photoresist, which can be employed to achiev…
Ultralow noise, yet tunable lasers are a revolutionary tool in precision spectroscopy, displacement measurements at the standard quantum limit, and the development of advanced optical atomic clocks. Further applications include LIDAR, coherent communications, frequency synthesis, and precision sensors of strain, motion, and temperature. While all applications benefit from lower frequency noise, many also require a laser that is robust and compact. Here, we introduce a dual-microcavity laser that leverages one chip-integrable silica microresonator to generate tunable 1550 nm laser light via sti…
An add-drop filter (ADF) fabricated using a whispering gallery mode resonator has different crosstalks for add and drop functions due to non-zero intrinsic losses of the resonator. Here, we show that introducing gain medium in the resonator and optically pumping it below the lasing threshold not only allows loss compensation to achieve similar and lower crosstalks but also tunability in bandwidth and add-drop efficiency. For an active ADF fabricated using an erbium-ytterbium co-doped microsphere, we achieved 24-fold enhancement in the intrinsic quality factor, 3.5-fold increase in drop efficie…
We study the mechanical stability of a tunable high-finesse microcavity under ambient conditions and investigate light-induced effects that can both suppress and excite mechanical fluctuations. As an enabling step, we demonstrate the ultra-precise electronic stabilization of a microcavity. We then show that photothermal mirror expansion can provide high-bandwidth feedback and improve cavity stability by almost two orders of magnitude. At high intracavity power, we observe self-oscillations of mechanical resonances of the cavity. We explain the observations by a dynamic photothermal instability…
Spatial light modulators (SLMs) are central to numerous applications ranging from high-speed displays to adaptive optics, structured illumination microscopy, and holography. After decades of advances, SLM arrays based on liquid crystals can now reach large pixel counts exceeding 10^6 with phase-only modulation with a pixel pitch of less than 10 μm and reflectance around 75%. However, the rather slow modulation speed in such SLMs (below hundreds of Hz) presents limitations for many applications. Here we propose an SLM architecture that can achieve high pixel count with high-resolution phase-onl…
Raman lasers based on bulk diamond are a valuable resource for generating coherent light in wavelength regimes where no common laser diodes are available. Nevertheless, the widespread use of such lasers is limited by their high threshold power requirements on the order of several Watts. Using on-chip microresonators, a significant reduction of the lasing threshold by more than two orders of magnitude has been shown. However, these resonators lack a continuous tuning mechanism and, mainly due to fabrication limitations, their implementation in the visible remains elusive. Here, we propose a pla…
The spontaneous emission of atoms can be controlled by placing them between two mirrors that form an optical cavity. Rapid advances in material processing techniques in the last 10 years have made it possible to fabricate microscopic optical cavities that can be finely tuned into resonance with the emitter. This has enabled progress in single-photon sources, nano-lasers and spectroscopy of new nano-emitters such as semiconductor quantum dots and Nitrogen-vacancy centres in diamond. Here we introduce a step-by-step method for computing the Purcell factor of the latest generation of open tunable…
Optical microcavities are a powerful tool to enhance spontaneous emission of individual quantum emitters. However, the broad emission spectra encountered in the solid state at room temperature limit the influence of a cavity, and call for ultra-small mode volume. We demonstrate Purcell-enhanced single photon emission from nitrogen-vacancy (NV) centers in nanodiamonds coupled to a tunable fiber-based microcavity with a mode volume down to $1.0\,λ^{3}$. We record cavity-enhanced fluorescence images and study several single emitters with one cavity. The Purcell effect is evidenced by enhanced flu…
Electrically reconfigurable dipolar polaritons with highly tunable nonlinearity in a homobilayer microcavity
Tsinghua University（清华大学）；University of Washington（华盛顿大学）；Beijing Academy of Quantum Information Sciences（北京量子信息科学研究院）；National Institute for Materials Science（国立材料研究所）；Nanyang Technological University（南洋理工大学）；Frontier Science Center for Quantum Information（量子信息前沿科学中心）
Open-access microcavities are a powerful tool to enhance light-matter interactions for solid-state quantum and nano systems and are key to advance applications in quantum technologies. For this purpose, the cavities should simultaneously meet two conflicting requirements - full tunability to cope with spatial and spectral inhomogeneities of a material, and highest stability under operation in a cryogenic environment to maintain resonance conditions. To tackle this challenge, we have developed a fully-tunable, open-access, fiber-based Fabry-Pérot microcavity platform which can be operated also …
Microcavities have long been recognized as indispensable elements in quantum photonic research due to their usefulness for enhanced light extraction and light-matter interaction. A conventional high-Q cavity structure typically allows only a single optical transition to be tuned into resonance with a specific mode. The transition to a more advanced double-cavity structure, however, introduces new and interesting possibilities such as enhancing two spectrally close optical transitions at the same time with two distinct cavity modes. Here, we investigate a cavity structure composed of a monolith…
Strong coupling between molecular vibrations and microcavity modes has been demonstrated to modify physical and chemical properties of the molecular material. Here, we study the much less explored coupling between lattice vibrations (phonons) and microcavity modes. Embedding thin layers of hexagonal boron nitride (hBN) into classical microcavities, we demonstrate the evolution from weak to ultrastrong phonon-photon coupling when the hBN thickness is increased from a few nanometers to a fully filled cavity. Remarkably, strong coupling is achieved for hBN layers as thin as 10 nm. Further, the ul…
High-finesse, open-geometry microcavities have recently emerged as a versatile tool for enhancing interactions between photons and material systems, with a range of applications in quantum optics and quantum information science. However, mechanical vibrations pose a considerable challenge to their operation within a closed-cycle cryostat, particularly when spatial tunability and free-space optical access are required. Here, we present the design and characterization of a system that can achieve $\sim$16 pm-rms passive mechanical stability between two high-finesse mirrors while permitting both …
We report on the coupling of a single Nitrogen-vacancy (NV) center in a nanodiamond to a fiber-based microcavity at room temperature. Investigating the very same NV center inside the cavity and in free-space allows to systematically explore a new regime of phonon-assisted cavity feeding. Making use of the NV center's strongly broadened emission, we realize a widely tunable, narrowband single photon source. A master equation model well reproduces our experimental results and predicts a transition into a Purcell-enhanced emission regime at low temperatures.
Recent technological advancements have allowed to implement in solid-state cavity-based devices phenomena of quantum nature such as vacuum Rabi splitting, controllable single photon emission and quantum entanglement. For a sufficiently strong coupling between a quantum emitter and a cavity, large quality factors ($Q$) along with small modal volume ($V_{eff}$) are essential. Here we show that by applying a 5nm Al coating to the sidewalls of a submicrometer-sized Fabry-Pérot microcavity, the cavity $Q$ can be temperature-tuned from few hundreds at room temperatures to 2$\times$10$^5$ below 30~K.…
Open Fabry-Perot microcavities represent a promising route for achieving a quantum electrodynamics (cavity-QED) platform with diamond-based emitters. In particular, they offer the opportunity to introduce high purity, minimally fabricated material into a tunable, high quality factor optical resonator. Here, we demonstrate a fiber-based microcavity incorporating a thick (> 10 μm) diamond membrane with a finesse of 17,000, corresponding to a quality factor Q ~ $10^6$. Such minimally fabricated, thick samples can contain optically stable emitters similar to those found in bulk diamond. We observe…
We report controlled manipulation of mode splitting in an optical microresonator coupled to two nanoprobes. It is demonstrated that, by controlling the positions of the nanoprobes, the split modes can be tuned simultaneously or individually and experience crossing or anti-crossing in frequency and linewidth. A tunable transition between standing wave mode and travelling wave mode is also observed. Underlying physics is discussed by developing a two-scatterer model which can be extended to multiple scatterers. Observed rich dynamics and tunability of split modes in a single microresonator will …
The strong coupling of an IR-active molecular transition with an optical mode of the cavity results in vibrational polaritons, which opens a new way to control chemical reactivity via confined electromagnetic fields of the cavity. In this study, we design a voltage-tunable open microcavity and we show the formation of multiple vibrational polaritons in methyl salicylate. A Rabi splitting and polariton anticrossing behaviour is observed when the cavity mode hybridizes with the C=O stretching vibration of methyl salicylate. As this vibration contributes to the reaction coordinate of the photoind…
We study the optomechanical coupling of a single-layer graphene with a high-Q Fabry-Perot microcavity in the membrane-in-the-middle configuration. In ordinary dissipative coupling systems, mechanical oscillators modulate the loss associated with the input coupling of the cavity mode; while in our system, the graphene oscillator couples dissipatively with the cavity mode through modulating its absorption loss. By analyzing the effects of the interband transition of a graphene suspended near the node of the cavity field, we obtain strong and tunable dissipative coupling without excessively reduc…
How to utilize topological microcavities to control quantum emission is one of the ongoing research topics in the optical community. In this work, we investigate the emission of quantum emitters in doubly-resonant topological Tamm microcavity, which can simultaneously achieve dual resonances at two arbitrary wavelengths according to the needs of practical application. To achieve the enhancement of quantum emission in such cavities, we have exploited the tunable doubly-resonant modes, in which one of resonant modes corresponds to the pump laser wavelength and the other one is located at the emi…
The field of spinoptronics is underpinned by good control over photonic spin-orbit coupling in devices that possess strong optical nonlinearities. Such devices might hold the key to a new era of optoelectronics where momentum and polarization degrees-of-freedom of light are interwoven and interfaced with electronics. However, manipulating photons through electrical means is a daunting task given their charge neutrality and requires complex electro-optic modulation of their medium. In this work, we present electrically tunable microcavity exciton-polariton resonances in a Rashba-Dresselhaus spi…
Hybrid light-matter states, polaritons, are one of the central concepts in modern quantum optics and condensed matter physics. Polaritons emerge as a result of strong interaction between an optical mode and a material resonance, which is frequently realized in molecular, van der Waals, or solid-state platforms (1-7). However, this route requires accurate (nano)fabrication and often lacks simple means for tunability, which could be disadvantageous in some applications. Here, we use a different approach to realize polaritonic states by employing a stable equilibrium between two parallel gold nan…
On-chip efficient nonlinear functions are instrumental in escalating the utilities and performance of photonic integrated circuits (PICs), especially for a wide range of classical and quantum applications, such as tunable coherent radiation, optical frequency conversion, spectroscopy, quantum science, etc. Lithium tantalate (LT) has been widely used in nonlinear wavelength converters, surface acoustic wave resonators, and electro-optic, acoustic-optic devices owing to its excellent optical properties. Here, we fabricated a Z-cut lithium tantalate on insulator (LTOI) microdisk with high quality…
Strong inter-particle interactions between polaritons have traditionally stemmed from their exciton component. In this work, we impart a strong photonic nonlinearity to a polaritonic mode by embedding a nonlinear polymethine dye within a high-Q all-metal microcavity. We demonstrate nonlinear microcavities operating in the ultrastrong coupling regime with a normalized coupling ratio of 62\%, the highest reported to date. When pumping the lower polariton branch, we observe tunable third-harmonic generation spanning the entire visible spectrum, with internal conversion enhancements more than thre…
A route toward lineshape engineering of Fano resonances in photonic structures is theoretically proposed, which uses dynamic modulation of the refractive index of a microcavity. The method is exemplified by considering coupled-resonator optical waveguide systems. An exact Floquet analysis, based on coupled-mode theory, is presented. Two distinct kinds of resonances can be dynamically created, depending on whether the static structure sustains a localized mode or not. In the former case a single Fano resonance arises, which can be tuned in both frequency and line width by varying the refractive…
Direct laser-written optomechanical double membranes in an optical microcavity
University of Bonn（波恩大学）；Technical University of Munich（慕尼黑工业大学）；Munich Center for Quantum Science and Technology (MCQST)（慕尼黑量子科学与技术中心）；Chalmers University of Technology（查尔姆斯理工大学）
A tunable, all-optical, coupling method has been realized for a high-\textit{Q} silica microsphere and an optical waveguide. By means of a novel optical nanopositioning method, induced thermal expansion of an asymmetric microsphere stem for laser powers up to 171~mW has been observed and used to fine tune the microsphere-waveguide coupling. Microcavity displacements ranging from (0.612~$\pm$~0.13) -- (1.5 $\pm$ 0.13) $μ$m and nanometer scale sensitivities varying from (2.81 $\pm$ 0.08) -- (7.39 $\pm$ 0.17) nm/mW, with an apparent linear dependency of coupling distance on stem laser heating, we…
We report on the development of on-chip microcavities and show their potential as a platform for cavity quantum electrodynamics experiments. Microcavity arrays were formed by the controlled buckling of SiO2/Ta2O5 Bragg mirrors, and exhibit a reflectance-limited finesse of 3500 and mode volumes as small as 35lambda^3. We show that the cavity resonance can be thermally tuned into alignment with the D2 transition of 87Rb, and outline two methods for providing atom access to the cavity. Owing to their small mode volume and high finesse, these cavities exhibit single-atom cooperativities as high as…
In this dissertation novel resonant propulsion of dielectric microspheres is studied with the goal of sorting spheres with identical resonances, which are critical for developing microspherical photonics. First, evanescent field couplers were developed by fixing tapered microfibers in mechanically robust platforms. The tapers were obtained by chemical etching techniques. Using these platforms, WGMs modal numbers, coupling regimes and quality factors were determined for various spheres and compared with theory. Second, the spectroscopic properties of photonic molecules formed by spheres with be…
The nitrogen-vacancy (NV) center in diamond has an optically addressable, highly coherent spin. However, an NV center even in high quality single-crystalline material is a very poor source of single photons: extraction out of the high-index diamond is inefficient, the emission of coherent photons represents just a few per cent of the total emission, and the decay time is large. In principle, all three problems can be addressed with a resonant microcavity. In practice, it has proved difficult to implement this concept: photonic engineering hinges on nano-fabrication yet it is notoriously diffic…
