arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2310.02091physics.opticsphysics.app-ph
收藏

用于胶体量子发射体颜色下转换的双共振纳米结构

Dual-resonance nanostructures for colour down-conversion of colloidal quantum emitters

Son Tung Ha, Emmanuel Lassalle, Xiao Liang, Thi Thu Ha Do, Ian Foo, Sushant Shendre, Emek Goksu Durmusoglu, Vytautas Valuckas, Sourav Adhikary, Ramon Paniagua-D… 展开作者

Son Tung Ha, Emmanuel Lassalle, Xiao Liang, Thi Thu Ha Do, Ian Foo, Sushant Shendre, Emek Goksu Durmusoglu, Vytautas Valuckas, Sourav Adhikary, Ramon Paniagua-Dominguez, Hilmi Volkan Demir, Arseniy Kuznetsov

AI总结:

本研究提出一种TiO₂亚波长光栅双共振纳米结构,通过光栅共振与波导模式杂化增大模式体积,显著提升胶体量子点绿光下转换效率,为微LED等领域的大体积腔设计提供指导。

摘要:

线性颜色转换是指发射体吸收一个光子后发射出另一个能量更高或更低的光子的过程,分别对应上转换或下转换。在这一过程中,体腔的存在对于增强吸收和光致发光(PL)起着至关重要的作用,因为它能让激发光子与发光材料之间产生大体积的相互作用,从而最大化颜色转换效率。\n本文提出了一种由二氧化钛(TiO₂)亚波长光栅构成的双共振纳米结构,用于增强梯度合金化CdxZn1-xSeyS1-y胶体量子点(QDs)在约460 nm蓝光激发下发射的约530 nm绿光的颜色下转换效率。通过光栅共振与波导模式的杂化,可在量子点层内产生大的模式体积。这能够增加共振模式与量子点之间的模式重叠,从而实现显著的吸收增强和可控的发射增强。\n具体而言,我们实现了偏振光发射,在特定角度方向上的最大光致发光增强约为140倍,在收集物镜0.55数值孔径(NA)范围内的总增强约为34倍。该增强涵盖了吸收增强、Purcell增强和方向性增强(即出耦合增强)。对于仅含约400 nm厚(含TiO₂层)的超薄颜色转换层的绿色量子点,我们实现了35%的总吸收率。\n这项工作为设计可实际应用于吸收/荧光增强(如微型LED显示器、探测器或光伏器件中的颜色下转换)的大体积腔提供了指导方针。

英文摘要:

Linear colour conversion is a process where an emitter absorbs a photon and then emits another photon with either higher or lower energy, corresponding to up- or down conversion, respectively. In this regard, the presence of a volumetric cavity plays a crucial role in enhancing absorption and photoluminescence (PL), as it allows for large volumes of interaction between the exciting photons and the emissive materials, maximising the colour conversion efficiency. Here, we present a dual resonance nanostructure made of a titanium dioxide (TiO2) subwavelength grating to enhance the colour down-conversion efficiency of green light at ~530 nm emitted by gradient alloyed CdxZn1-xSeyS1-y colloidal quantum dots (QDs) when excited with a blue light at ~460 nm. A large mode volume can be created within the QD layer by the hybridisation of the grating resonances and waveguide modes. This allows increasing mode overlap between the resonances and the QDs, resulting in large absorption and tailored emission enhancements. Particularly, we achieved polarized light emission with maximum photoluminescence enhancement of ~140 times at a specific angular direction, and a total enhancement of ~34 times within 0.55 numerical aperture (NA) of the collecting objective. The enhancement encompasses absorption enhancement, Purcell enhancement and directionality enhancement (i.e., outcoupling). We achieved total absorption of 35% for green QDs with a remarkably thin colour conversion layer of ~ 400 nm (inclusive of the TiO2 layer). This work provides a guideline for designing large-volume cavities for practical application in absorption/fluorescence enhancement, such as down colour conversion in microLED displays, detectors or photovoltaics.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑