We numerically study the dynamics of a passive fluid droplet confined within a microchannel whose walls are covered with a thin layer of active gel. The latter represents a fluid of extensile material modelling, for example, a suspension of cytoskeletal filaments and molecular motors. Our results show that the layer is capable of producing a spontaneous flow triggering a rectilinear motion of the passive droplet. For a hybrid design (a single wall covered by the active layer), at the steady state the droplet attains an elliptical shape, resulting from an asymmetric saw-toothed structure of the velocity field. On the contrary, if the active gel covers both walls, the velocity field exhibits a fully symmetric pattern considerably mitigating morphological deformations. We further show that the structure of the spontaneous flow in the microchannel can be controlled by the anchoring conditions of the active gel at the wall. These findings are also confirmed by selected 3D simulations. Our results may stimulate further research addressed to design novel microfludic devices whose functioning relies on the collective properties of active gels.
Biological microswimmers are known to navigate upstream of an external flow (positive rheotaxis) in trajectories ranging from linear, spiral to oscillatory. Such rheotaxis stems from the interplay between the motion and complex shapes of the microswimmers, e.g. the chirality of the rotating flagella, the shear flow characteristics, and the hydrodynamic interaction with a confining surface. Here, we show that an isotropic, active droplet microswimmer exhibits a unique oscillatory rheotaxis in a microchannel despite its simple spherical geometry. The swimming velocity, orientation, and the chemi…
Simulations show that when a phase-separated binary AB fluid is driven to flow past chemically patterned substrates in a microchannel, the fluid exhibits unique morphological instabilities. For the pattern studied, these instabilities give rise to the simultaneous, periodic formation of monodisperse droplets of A-in-B and B-in-A. The system bifurcates between time-independent behavior and different types of regular, non-decaying oscillations in the structural characteristics. The surprisingly complex behavior is observed even in the absence of hydrodynamic interactions and arises from the inte…
The shape of a microchannel during flow through it is instrumental to understanding the physics that govern various phenomena ranging from rheological measurements of fluids to separation of particles and cells. Two commonly used approaches for obtaining a desired channel shape (for a given application) are (i) fabricating the microchannel in the requisite shape and (ii) actuating the microchannel walls during flow to obtain the requisite shape. However, these approaches are not always viable. We propose an alternative, passive approach to {\it a priori} tune the elastohydrodynamics in a micro…
We report observations of the self-assembly of coated droplets into regular clusters at the sudden expansion of a microfluidic channel. A double emulsion consisting of a regular train of coated microdroplets was created upstream of the channel expansion, so that the inter-drop distance, droplet length, velocity and coating thickness could be varied by imposing different inlet pressures, albeit not independently. Provided that the enlarged channel remains sufficiently confined to prohibit propagation in double file, droplets can assemble sequentially into regular linear clusters at the expansio…
The rheology of pressure-driven flows of two-dimensional dense monodisperse emulsions in neutral wetting microchannels is investigated by means of mesoscopic lattice simulations, capable of handling large collections of droplets, in the order of several hundreds. The simulations reveal that the fluidization of the emulsion proceeds through a sequence of discrete steps, characterized by yielding events whereby layers of droplets start rolling over each other, thus leading to sudden drops of the relative effective viscosity. It is shown that such discrete fluidization is robust against loss of c…
Motivated by recent experimental advances (Stroock et al. 2002) in microfluidic mixers, we study the passive mixing and flow properties of a patterned microchannel by means of computational fluid dynamics (CFD). Such geometries overcome the low Reynolds number, high Peclet number boundaries to efficient mixing by creating a three-dimensional flow that yields chaotic trajectories for advected passive scalars. The flow seems to exploit an effective shearing mechanism, or 'ditch mixing,' rather than the alternating span-wise vorticity mechanism we anticipated. Further, we find superexponential mi…
Active fluid droplets surrounded by oil can spontaneously develop circulatory flows. However, the dynamics of the surrounding oil and their influence on the active fluid remain poorly understood. To investigate interactions between the active fluid and the passive oil across their interface, kinesin-driven microtubule-based active fluid droplets were immersed in oil and compressed into a cylinder-like shape. The droplet geometry supported intradroplet circulatory flows, but the circulation was suppressed when the thickness of the oil layer surrounding the droplet decreased. Experiments with tr…
Understanding the fluid-structure interaction is crucial for an optimal design and manufacturing of soft mesoscale materials. Multi-core emulsions are a class of soft fluids assembled from cluster configurations of deformable oil-water double droplets (cores), often employed as building-blocks for the realisation of devices of interest in bio-technology, such as drug-delivery, tissue engineering and regenerative medicine. Here, we study the physics of multi-core emulsions flowing in microfluidic channels and report numerical evidence of a surprisingly rich variety of driven non-equilibrium sta…
Active fluid droplets are a class of soft materials exhibiting autonomous motion sustained by an energy supply. Such systems have been shown to capture motility regimes typical of biological cells and are ideal candidates as building-block for the fabrication of soft biomimetic materials of interest in pharmacology, tissue engineering and lab on chip devices. While their behavior is well established in unconstrained environments, much less is known about their dynamics under strong confinement. Here, we numerically study the physics of a droplet of active polar fluid migrating within a microch…
In living cells, molecular motors create activity that enhances the diffusion of particles throughout the cytoplasm, and not just ones attached to the motors. We demonstrate initial steps toward creating artificial cells that mimic this phenomenon. Our system consists of active, Pt-coated Janus particles and passive tracers confined to emulsion droplets. We track the motion of both the active particles and passive tracers in a hydrogen peroxide solution, which serves as the fuel to drive the motion. We first show that correcting for bulk translational and rotational motion of the droplets indu…
Recent experimental studies have shown that particle transfer across streamlines can be controlled passively using stratified flows of co-flowing streams at a finite Reynolds number. The stratification modifies the forces acting on particles through the curvature of the undisturbed velocity profile. In this study, we numerically analyze the particle migration in stratified flow of two liquids of different viscosities flowing parallel to each other between two infinite parallel plates. Particle migration in two different flow fields is considered: (i) Couette flow and (ii) Poiseuille flow. A nu…
We investigate experimentally the behavior of self-propelled water-in-oil droplets, confined in capillaries of different square and circular cross-sections. The droplet's activity comes from the formation of swollen micelles at its interface. In straight capillaries the velocity of the droplet decreases with increasing confinement. However at very high confinement, the velocity converges toward a non-zero value, so that even very long droplets swim. Stretched circular capillaries are then used to explore even higher confinement. The lubrication layer around the droplet then takes a non-uniform…
We study numerically the behaviour of a mixture of a passive isotropic fluid and an active polar gel, in the presence of a surfactant favouring emulsification. Focussing on parameters for which the underlying free energy favours the lamellar phase in the passive limit, we show that the interplay between nonequilibrium and thermodynamic forces creates a range of multifarious exotic emulsions. When the active component is contractile (e.g., an actomyosin solution), moderate activity enhances the efficiency of lamellar ordering, whereas strong activity favours the creation of passive droplets wit…
Living microorganisms in confined systems typically experience an affinity to populate boundaries. The reason for such affinity to interfaces can be a combination of their directed motion and hydrodynamic interactions at distances larger than their own size. Here we will show that self-propelled Janus particles (polystyrene particles partially coated with platinum) immersed in droplets of water and hydrogen peroxide tend to accumulate in the vicinity of the liquid/gas interface. Interestingly, the interfacial accumulation occurs despite the presence of an evaporation-driven flow caused by a so…
The spontaneous motion of liquid droplets on solid surfaces is the result of an unbalanced surface tension force, which is sometimes called the "Marangoni effect". This can be triggered by either a difference in surface temperature or a heterogeneity in the topography or chemistry of the surface passively or actively. The imbibition of liquid within capillary tubes, horizontal ice wicking on either hydrophilic or hydrophobic substrates, and inkjet printing for example are just some classic illustrations of where the Lucas-Washburn equation can predict droplet behavior characteristics fairly we…
Bacterial turbulence drives interfacial waves and shape dynamics in phase-separated droplets
School of Physics and Astronomy, Institute of Natural Sciences and MOE-LSC, Shanghai Jiao Tong University（上海交通大学物理与天文学院、自然科学研究院和MOE-LSC）；Fujian Provincial Key Laboratory for Soft Functional Materials Research, Research Institute for Biomimetics and Soft Matter, Department of Physics, Xiamen University（厦门大学物理系仿生与软物质研究院福建省软功能材料研究重点实验室）；Universal Biology Institute, Graduate School of Science, The University of Tokyo（东京大学理学研究科全球生物学研究所）
We analyze the dynamics of a microswimmer in pressure-driven Poiseuille flow, where fluid inertia is small but non-negligible. Using perturbation theory and the reciprocal theorem, we show that in addition to the classical inertial lift of passive particles, the active nature generates a `swimming lift', which we evaluate for neutral and pusher/puller-type swimmers. Accounting for fluid inertia engenders a rich spectrum of novel complex dynamics including bistable states, where tumbling coexists with stable centerline swimming or swinging. The dynamics is sensitive to the swimmer's hydrodynami…
We numerically study the behavior of self-propelled liquid droplets whose motion is triggered by a Marangoni-like flow. This latter is generated by variations of surfactant concentration which affect the droplet surface tension promoting its motion. In the present paper a model for droplets with a third amphiphilic component is adopted. The dynamics is described by Navier-Stokes and convection-diffusion equations, solved by lattice Boltzmann method coupled with finite-difference schemes. We focus on two cases. First the study of self-propulsion of an isolated droplet is carried on and, then, t…
We investigate numerically, by a hybrid lattice Boltzmann method, the morphology and the dynamics of an emulsion made of a polar active gel, contractile or extensile, and an isotropic passive fluid. We focus on the case of a highly off-symmetric ratio between the active and passive components. In absence of any activity we observe an hexatic-ordered droplets phase, with some defects in the layout. We study how the morphology of the system is affected by activity both in the contractile and extensile case. In the extensile case a small amount of activity favors the elimination of defects in the…
Fluid droplets can be induced to move over rigid or flexible surfaces under external or body forces. We describe the effect of variations in material properties of a flexible substrate as a mechanism for motion. In this paper, we consider a droplet placed on a substrate with either a stiffness or surface energy gradient, and consider its potential for motion via coupling to elastic deformations of the substrate. In order to clarify the role of contact angles and to obtain a tractable model, we consider a two-dimensional droplet. The gradients in substrate material properties give rise to asymm…
The development of microfluidic devices is still hindered by the lack of robust fundamental building blocks that constitute any fluidic system. An attractive approach is optical actuation because light field interaction is contactless and dynamically reconfigurable, and solutions have been anticipated through the use of optical forces to manipulate microparticles in flows. Following the concept of an 'optical chip' advanced from the optical actuation of suspensions, we propose in this survey new routes to extend this concept to microfluidic two-phase flows. First, we investigate the destabiliz…
We use a continuum model to examine the effect of activity on a phase separating mixture of an extensile active nematic and a passive fluid. We highlight the distinct role of previously considered interfacial active stresses and bulk active stresses that couple to liquid crystalline degrees of freedom. Interfacial active stresses can arrest phase separation, as previously demonstrated. Bulk extensile active stresses can additionally strongly suppress phase separation by sustained self-stirring of the fluid, substantially reducing the size of the coexistence region in the temperature/concentrat…
Phase separation is the thermodynamic process that explains how droplets form in multicomponent fluids. These droplets can provide controlled compartments to localize chemical reactions, and reactions can also affect the droplets' dynamics. This review focuses on the tight interplay between phase separation and chemical reactions originating from thermodynamic constraints. In particular, simple mass action kinetics cannot describe chemical reactions since phase separation requires non-ideal fluids. Instead, thermodynamics implies that passive chemical reactions reduce the complexity of phase d…
We study the linear stability of an isotropic active fluid in three different geometries: a film of active fluid on a rigid substrate, a cylindrical thread of fluid, and a spherical fluid droplet. The active fluid is modeled by the hydrodynamic theory of an active nematic liquid crystal in the isotropic phase. In each geometry, we calculate the growth rate of sinusoidal modes of deformation of the interface. There are two distinct branches of growth rates; at long wavelength, one corresponds to the deformation of the interface, and one corresponds to the evolution of the liquid crystalline deg…
The morphology of a mixture made of a polar active gel immersed in an isotropic passive fluid is studied numerically. Lattice Boltzmann method is adopted to solve the Navier-Stokes equation and coupled to a finite-difference scheme used to integrate the dynamic equations of the concentration and of the polarization of the active component. By varying the relative amounts of the mixture phases, different structures can be observed. In the contractile case, at moderate values of activity, elongated structures are formed when the active component is less abundant, while a dynamic emulsion of pass…
How particles are deposited at the edge of evaporating droplets, i.e. the {\em coffee ring} effect, plays a crucial role in phenomena as diverse as thin-film deposition, self-assembly, and biofilm formation. Recently, microorganisms have been shown to passively exploit and alter these deposition dynamics to increase their survival chances under harshening conditions. Here, we show that, as the droplet evaporation rate slows down, bacterial mobility starts playing a major role in determining the growth dynamics of the edge of drying droplets. Such motility-induced dynamics can influence several…
Controlling interfaces of phase separating fluid mixtures is key to creating diverse functional soft materials. Traditionally, this is accomplished with surface-modifying chemical agents. Using experiment and theory, we study how mechanical activity shapes soft interfaces that separate an active and a passive fluid. Chaotic flows in the active fluid give rise to giant interfacial fluctuations and non-inertial propagating active waves. At high activities, stresses disrupt interface continuity and drive droplet generation, producing an emulsion-like active state comprised of finite-sized droplet…
The phase separation of a two-dimensional active binary mixture is studied under the action of an applied shear through numerical simulations. It is highlighted how the strength of the external flow modifies the initial shape of growing domains. The activity is responsible for the formation of isolated droplets which affect both the coarsening dynamics and the morphology of the system. The characteristic dimensions of domains along the flow and the shear direction are modulated in time by oscillations whose amplitudes are reduced when the activity increases. This induces a broadening of the di…
