arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2307.16043cond-mat.softphysics.flu-dyn
收藏

蒸发与凝结中的界面冷却与加热、温度不连续性与温度反转

Interfacial cooling and heating, temperature discontinuity and inversion in evaporation and condensation

Gang Chen

AI总结:

本文基于动理论求解蒸发与凝结的液气耦合问题,揭示界面固有的温度跳跃机制,并指出薄液层下蒸发凝结速率会饱和,纠正了速率与液膜厚度成反比的传统观点。

摘要:

尽管在自然界和工业过程中无处不在,但蒸发和凝结过程中界面处的输运过程仍然知之甚少。实验表明,在蒸发和凝结过程中,界面处存在温度不连续性,但实验报告的界面温度跳跃变化达两个数量级。甚至这种温度跳跃的方向仍存在争议。我们使用基于动理论(kinetic theory)的界面质量通量和热通量表达式,求解了蒸发和凝结过程中液相和气相之间的耦合问题。我们的模型表明,当蒸发或凝结发生时,由于界面处蒸汽携带的焓与体相区域不匹配,界面两侧会产生固有的温度差。在蒸发过程中,界面附近的蒸汽温度冷却至低于液体表面的饱和温度,而在凝结过程中则加热至高于后者。然而,许多现有实验显示出与这一预测相反的趋势。我们将这种差异解释为气相中反向热传导所致。我们的模型结果与蒸发和凝结的实验结果吻合良好。我们表明,当液层非常薄时,固体壁面与气相之间施加的温差大部分发生在液-气界面处,导致蒸发和凝结速率以及相应的传热速率达到饱和。这一结果与当前认为蒸发和凝结速率与液膜厚度成反比的观点相矛盾。

英文摘要:

Although ubiquitous in nature and industrial processes, transport processes at the interface during evaporation and condensation are still poorly understood. Experiments have shown temperature discontinuities at the interface during evaporation and condensation but the experimentally reported interface temperature jump varies by two orders of magnitude. Even the direction of such temperature jump is still being debated. Using kinetic-theory based expressions for the interfacial mass flux and heat flux, we solve coupled problem between the liquid and the vapor phase during evaporation and condensation. Our model shows that when evaporation or condensation happens, an intrinsic temperature difference develops across the interface, due to the mismatch of the enthalpy carried by vapor at the interface and the bulk region. The vapor temperature near the interface cools below the saturation temperature on the liquid surface during evaporation and heats up above the latter during condensation. However, many existing experiments have shown an opposite trend to this prediction. We explain this difference as arising from the reverse heat conduction in the vapor phase. Our model results compare favorably with experiments on both evaporation and condensation. We show that when the liquid layer is very thin, most of the applied temperature difference between the solid wall and the vapor phase happens at the liquid-vapor interface, leading to saturation of the evaporation and the condensation rates and the corresponding heat transfer rate. This result contradicts current belief that the evaporation and condensation rates are inversely proportional to the liquid film thickness.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑