arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2304.02645physics.app-phphysics.soc-ph
收藏

激光蚀刻实现的 $β$-Ga$_2$O$_3$ 主动嵌入式微流体冷却

Laser Etch Enabled Active Embedded Microfluidic Cooling in $β$-Ga$_2$O$_3$

Shonkho Shuvro, Roopa Jayaramaiah, Rangarajan Muralidharan, Digbijoy N. Nath, Prosenjit Sen

AI总结:

本研究利用红外激光蚀刻技术在 $β$-Ga$_2$O$_3$ 衬底中制备微通道,实现了主动嵌入式微流体冷却,在 3.5 W 功率下使表面温度降低 50%,为该器件热管理提供新范式。

摘要:

我们展示了在 $β$-Ga$_2$O$_3$ 中的主动嵌入式微流体冷却。我们采用一种具有成本效益的红外激光蚀刻装置,实现了对 500 um 厚的 $β$-Ga$_2$O$_3$ 衬底中微通道的受控蚀刻。这些微通道深约 210 um,宽约 340 um。电阻加热被用作概念验证。在水流速为 50 ml/min 时,对于 3.5 W 的输入功率,表面温度从 ~140$^\circ$C 降至 ~72$^\circ$C,实现了 50% 的降幅。实验观察得到了热仿真的支持。这项工作有望为新兴 $β$-Ga$_2$O$_3$ 器件的热管理带来新范式。

英文摘要:

We demonstrate active embedded microfluidic cooling in $β$-Ga$_2$O$_3$. We employ a cost-effective infra-red laser etch setup to achieve controlled etching of micro-channels in 500 um thick $β$-Ga$_2$O$_3$ substrate. The micro-channels are about 210 um deep and 340 um wide. Resistive heating is used as proof-of-concept. At a water flow rate of 50 ml/min, a 50% reduction in surface temperature from ~140$^\circ$C to ~72$^\circ$C is achieved for 3.5 W of input power. The experimental observations are backed by thermal simulation. This work is expected to lead to a new paradigm in thermal management in emerging $β$-Ga$_2$O$_3$ devices.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑