New Small Wheel 电子学系统
The New Small Wheel electronics
AI总结:
针对LHC高亮度下ATLAS前向μ子谱仪假径迹本底问题,本文介绍New Small Wheel电子学系统总体设计,该系统集成两种探测器技术,采用耐辐射ASIC、FELIX路由与ATCA触发处理板,实现精密读出与快速触发。
摘要:
LHC 升级带来的亮度增加以及随之而来的更高本底,要求在 ATLAS Muon Spectrometer 前向区域改进对假径迹的剔除能力。Muon Spectrometer 的 New Small Wheel 升级旨在减少由非相互作用点产生的径迹段所引发的假触发的大量本底。New Small Wheel 采用两种探测器技术,即电阻条 Micromegas 探测器和“小型”Thin Gap Chambers,共有 245 万个电极需要被读出。由于系统包含两种不同的探测器技术,且需要同时提供精密读出和快速触发,这两种技术要求设计一个复杂的电子学系统。该系统将在高本底辐射区域运行,在预期的 HL-LHC 亮度 $\mathcal{L}$=7.5$\times10^{34}$cm$^{-2}$s$^{-1}$ 下,本底率高达约 20 kHz/cm$^{2}$。该系统的架构主要由 GBTx 数据聚合 ASIC、新引入的 FELIX 数据路由器以及 ATLAS 探测器的基于软件的数据处理器所决定。这一新探测器的复杂电子学系统在过去十年中完成设计与研发,包含多个耐辐射专用集成电路(ASIC)、多块前端板、搭载 FPGA 的高密度电路板,以及符合 ATCA 标准的专用 Trigger Processor 板。New Small Wheel 已于 2021 年安装完毕,目前正在进行与 ATLAS 的集成工作,以备战 LHC Run 3。其运行周期预计将持续至 Run 4 结束(2032 年 12 月)。本文介绍了 New Small Wheel 电子学系统的总体设计。
英文摘要:
The increase in luminosity, and consequent higher backgrounds, of the LHC upgrades require improved rejection of fake tracks in the forward region of the ATLAS Muon Spectrometer. The New Small Wheel upgrade of the Muon Spectrometer aims to reduce the large background of fake triggers from track segments that are not originated from the interaction point. The New Small Wheel employs two detector technologies, the resistive strip Micromegas detectors and the "small" Thin Gap Chambers, with a total of 2.45 Million electrodes to be sensed. The two technologies require the design of a complex electronics system given that it consists of two different detector technologies and is required to provide both precision readout and a fast trigger. It will operate in a high background radiation region up to about 20 kHz/cm$^{2}$ at the expected HL-LHC luminosity of $\mathcal{L}$=7.5$\times10^{34}$cm$^{-2}$s$^{-1}$. The architecture of the system is strongly defined by the GBTx data aggregation ASIC, the newly-introduced FELIX data router and the software based data handler of the ATLAS detector. The electronics complex of this new detector was designed and developed in the last ten years and consists of multiple radiation tolerant Application Specific Integrated Circuits, multiple front-end boards, dense boards with FPGA's and purpose-built Trigger Processor boards within the ATCA standard. The New Small Wheel has been installed in 2021 and is undergoing integration within ATLAS for LHC Run 3. It should operate through the end of Run 4 (December 2032). In this manuscript, the overall design of the New Small Wheel electronics is presented.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。