Global channel pruning (GCP) aims to remove a subset of channels (filters) across different layers from a deep model without hurting the performance. Previous works focus on either single task model pruning or simply adapting it to multitask scenario, and still face the following problems when handling multitask pruning: 1) Due to the task mismatch, a well-pruned backbone for classification task focuses on preserving filters that can extract category-sensitive information, causing filters that may be useful for other tasks to be pruned during the backbone pruning stage; 2) For multitask predictions, different filters within or between layers are more closely related and interacted than that for single task prediction, making multitask pruning more difficult. Therefore, aiming at multitask model compression, we propose a Performance-Aware Global Channel Pruning (PAGCP) framework. We first theoretically present the objective for achieving superior GCP, by considering the joint saliency of filters from intra- and inter-layers. Then a sequentially greedy pruning strategy is proposed to optimize the objective, where a performance-aware oracle criterion is developed to evaluate sensitivity of filters to each task and preserve the globally most task-related filters. Experiments on several multitask datasets show that the proposed PAGCP can reduce the FLOPs and parameters by over 60% with minor performance drop, and achieves 1.2x$\sim$3.3x acceleration on both cloud and mobile platforms.
Pruning is a popular technique for reducing the model size and computational cost of convolutional neural networks (CNNs). However, a slow retraining or fine-tuning procedure is often required to recover the accuracy loss caused by pruning. Recently, a new research direction on weight pruning, pruning-at-initialization (PAI), is proposed to directly prune CNNs before training so that fine-tuning or retraining can be avoided. While PAI has shown promising results in reducing the model size, existing approaches rely on fine-grained weight pruning which requires unstructured sparse matrix computa…
Convolutional neural networks (CNN) have achieved impressive performance on the wide variety of tasks (classification, detection, etc.) across multiple domains at the cost of high computational and memory requirements. Thus, leveraging CNNs for real-time applications necessitates model compression approaches that not only reduce the total number of parameters but reduce the overall computation as well. In this work, we present a stability-based approach for filter-level pruning of CNNs. We evaluate our proposed approach on different architectures (LeNet, VGG-16, ResNet, and Faster RCNN) and da…
Structured pruning greatly eases the deployment of large neural networks in resource-constrained environments. However, current methods either involve strong domain expertise, require extra hyperparameter tuning, or are restricted only to a specific type of network, which prevents pervasive industrial applications. In this paper, we undertake a simple and effective approach that can be easily applied to both vision transformers and convolutional neural networks. Specifically, we consider pruning as an evolution process of sub-network structures that inherit weights through reconstruction techn…
Intel Labs（英特尔实验室）；University of Pittsburgh（匹兹堡大学）；Duke University（杜克大学）
Phenomenally successful in practical inference problems, convolutional neural networks (CNN) are widely deployed in mobile devices, data centers, and even supercomputers. The number of parameters needed in CNNs, however, are often large and undesirable. Consequently, various methods have been developed to prune a CNN once it is trained. Nevertheless, the resulting CNNs offer limited benefits. While pruning the fully connected layers reduces a CNN's size considerably, it does not improve inference speed noticeably as the compute heavy parts lie in convolutions. Pruning CNNs in a way that increa…
The deployment of Convolutional Neural Networks (CNNs) on resource constrained platforms such as mobile devices and embedded systems has been greatly hindered by their high implementation cost, and thus motivated a lot research interest in compressing and accelerating trained CNN models. Among various techniques proposed in literature, structured pruning, especially channel pruning, has gain a lot focus due to 1) its superior performance in memory, computation, and energy reduction; and 2) it is friendly to existing hardware and software libraries. In this paper, we investigate the intermediat…
The recent trend toward increasingly deep convolutional neural networks (CNNs) leads to a higher demand of computational power and memory storage. Consequently, the deployment of CNNs in hardware has become more challenging. In this paper, we propose an Intra-Kernel Regular (IKR) pruning scheme to reduce the size and computational complexity of the CNNs by removing redundant weights at a fine-grained level. Unlike other pruning methods such as Fine-Grained pruning, IKR pruning maintains regular kernel structures that are exploitable in a hardware accelerator. Experimental results demonstrate u…
Most neural network pruning methods, such as filter-level and layer-level prunings, prune the network model along one dimension (depth, width, or resolution) solely to meet a computational budget. However, such a pruning policy often leads to excessive reduction of that dimension, thus inducing a huge accuracy loss. To alleviate this issue, we argue that pruning should be conducted along three dimensions comprehensively. For this purpose, our pruning framework formulates pruning as an optimization problem. Specifically, it first casts the relationships between a certain model's accuracy and de…
Robert Bosch GmbH（罗伯特·博世有限公司）；University of Lübeck（吕贝克大学）
Unstructured pruning is well suited to reduce the memory footprint of convolutional neural networks (CNNs), both at training and inference time. CNNs contain parameters arranged in $K \times K$ filters. Standard unstructured pruning (SP) reduces the memory footprint of CNNs by setting filter elements to zero, thereby specifying a fixed subspace that constrains the filter. Especially if pruning is applied before or during training, this induces a strong bias. To overcome this, we introduce interspace pruning (IP), a general tool to improve existing pruning methods. It uses filters represented i…
University of Technology Sydney（悉尼科技大学）；A*STAR Centre for Frontier AI Research (CFAR)（新加坡科技研究局前沿人工智能研究中心）；Zhejiang University（浙江大学）
Filter pruning is effective to reduce the computational costs of neural networks. Existing methods show that updating the previous pruned filter would enable large model capacity and achieve better performance. However, during the iterative pruning process, even if the network weights are updated to new values, the pruning criterion remains the same. In addition, when evaluating the filter importance, only the magnitude information of the filters is considered. However, in neural networks, filters do not work individually, but they would affect other filters. As a result, the magnitude informa…
Convolutional Neural Networks (CNNs) suffer from different issues, such as computational complexity and the number of parameters. In recent years pruning techniques are employed to reduce the number of operations and model size in CNNs. Different pruning methods are proposed, which are based on pruning the connections, channels, and filters. Various techniques and tricks accompany pruning methods, and there is not a unifying framework to model all the pruning methods. In this paper pruning methods are investigated, and a general model which is contained the majority of pruning techniques is pr…
Structure pruning is an effective method to compress and accelerate neural networks. While filter and channel pruning are preferable to other structure pruning methods in terms of realistic acceleration and hardware compatibility, pruning methods with a finer granularity, such as intra-channel pruning, are expected to be capable of yielding more compact and computationally efficient networks. Typical intra-channel pruning methods utilize a static and hand-crafted pruning granularity due to a large search space, which leaves room for improvement in their pruning performance. In this work, we in…
Convolutional neural networks (CNNs) have succeeded in many practical applications. However, their high computation and storage requirements often make them difficult to deploy on resource-constrained devices. In order to tackle this issue, many pruning algorithms have been proposed for CNNs, but most of them can't prune CNNs to a reasonable level. In this paper, we propose a novel algorithm for training and pruning CNNs based on the recursive least squares (RLS) optimization. After training a CNN for some epochs, our algorithm combines inverse input autocorrelation matrices and weight matrice…
Australian National University（澳大利亚国立大学）；Australian Centre for Robotic Vision（澳大利亚机器人视觉中心）；Microsoft Research（微软研究院）；Data61, CSIRO（联邦科学与工业研究组织Data61）；Amazon（亚马逊）
Although 3D Convolutional Neural Networks are essential for most learning based applications involving dense 3D data, their applicability is limited due to excessive memory and computational requirements. Compressing such networks by pruning therefore becomes highly desirable. However, pruning 3D CNNs is largely unexplored possibly because of the complex nature of typical pruning algorithms that embeds pruning into an iterative optimization paradigm. In this work, we introduce a Resource Aware Neuron Pruning (RANP) algorithm that prunes 3D CNNs at initialization to high sparsity levels. Specif…
Australian National University（澳大利亚国立大学）；Australian Centre for Robotic Vision（澳大利亚机器人视觉中心）；Data61, CSIRO（澳大利亚联邦科学与工业研究组织Data61）；Microsoft Research（微软研究院）
Although 3D Convolutional Neural Networks (CNNs) are essential for most learning based applications involving dense 3D data, their applicability is limited due to excessive memory and computational requirements. Compressing such networks by pruning therefore becomes highly desirable. However, pruning 3D CNNs is largely unexplored possibly because of the complex nature of typical pruning algorithms that embeds pruning into an iterative optimization paradigm. In this work, we introduce a Resource Aware Neuron Pruning (RANP) algorithm that prunes 3D CNNs at initialization to high sparsity levels.…
Filter Pruning for Efficient CNNs via Knowledge-driven Differential Filter Sampler
East China Normal University（华东师范大学）；Xiamen University（厦门大学）；Beihang University（北京航空航天大学）；Zhongguancun Laboratory（中关村实验室）；Tencent（腾讯）；University of Sheffield（谢菲尔德大学）；University at Buffalo（布法罗大学）
Centre for Vision, Speech and Signal Processing (CVSSP)（视觉、语音与信号处理中心（CVSSP））；University of Surrey（萨里大学）
Convolution neural networks (CNNs) have shown great success in various applications. However, the computational complexity and memory storage of CNNs is a bottleneck for their deployment on resource-constrained devices. Recent efforts towards reducing the computation cost and the memory overhead of CNNs involve similarity-based passive filter pruning methods. Similarity-based passive filter pruning methods compute a pairwise similarity matrix for the filters and eliminate a few similar filters to obtain a small pruned CNN. However, the computational complexity of computing the pairwise similar…
We present a filter pruning approach for deep model compression, using a multitask network. Our approach is based on learning a a pruner network to prune a pre-trained target network. The pruner is essentially a multitask deep neural network with binary outputs that help identify the filters from each layer of the original network that do not have any significant contribution to the model and can therefore be pruned. The pruner network has the same architecture as the original network except that it has a multitask/multi-output last layer containing binary-valued outputs (one per filter), whic…
Neural network pruning is one of the most popular methods of accelerating the inference of deep convolutional neural networks (CNNs). The dominant pruning methods, filter-level pruning methods, evaluate their performance through the reduction ratio of computations and deem that a higher reduction ratio of computations is equivalent to a higher acceleration ratio in terms of inference time. However, we argue that they are not equivalent if parallel computing is considered. Given that filter-level pruning only prunes filters in layers and computations in a layer usually run in parallel, most com…
University of Pittsburgh（匹兹堡大学）；SUNY at Buffalo（纽约州立大学布法罗分校）；Duke University（杜克大学）；Midea Corporate Research Center（美的集团研究院）
Deep Convolutional Neural Networks~(CNNs) offer remarkable performance of classifications and regressions in many high-dimensional problems and have been widely utilized in real-word cognitive applications. However, high computational cost of CNNs greatly hinder their deployment in resource-constrained applications, real-time systems and edge computing platforms. To overcome this challenge, we propose a novel filter-pruning framework, two-phase filter pruning based on conditional entropy, namely \textit{2PFPCE}, to compress the CNN models and reduce the inference time with marginal performance…
Structured Pruning for Deep Convolutional Neural Networks: A survey
Centre for Frontier AI Research (CFAR), Agency for Science Technology and Research (A*STAR)（新加坡科技研究局前沿人工智能研究中心）；Institute of High Performance Computing (IHPC), Agency for Science, Technology and Research (A*STAR)（新加坡科技研究局高性能计算研究所）
Parameter pruning is a promising approach for CNN compression and acceleration by eliminating redundant model parameters with tolerable performance loss. Despite its effectiveness, existing regularization-based parameter pruning methods usually drive weights towards zero with large and constant regularization factors, which neglects the fact that the expressiveness of CNNs is fragile and needs a more gentle way of regularization for the networks to adapt during pruning. To solve this problem, we propose a new regularization-based pruning method (named IncReg) to incrementally assign different …
Convolutional neural networks (CNNs) are able to attain better visual recognition performance than fully connected neural networks despite having much fewer parameters due to their parameter sharing principle. Modern architectures usually contain a small number of fully-connected layers, often at the end, after multiple layers of convolutions. In some cases, most of the convolutions can be eliminated without suffering any loss in recognition performance. However, there is no solid recipe to detect the hidden subset of convolutional neurons that is responsible for the majority of the recognitio…
University of Maryland（马里兰大学）；NEC Labs America（NEC美国实验室）
The success of CNNs in various applications is accompanied by a significant increase in the computation and parameter storage costs. Recent efforts toward reducing these overheads involve pruning and compressing the weights of various layers without hurting original accuracy. However, magnitude-based pruning of weights reduces a significant number of parameters from the fully connected layers and may not adequately reduce the computation costs in the convolutional layers due to irregular sparsity in the pruned networks. We present an acceleration method for CNNs, where we prune filters from CN…
Washington State University（华盛顿州立大学）；Northeastern University（东北大学）；College of William and Mary（威廉与玛丽学院）；University of Sydney（悉尼大学）；University of Alabama（阿拉巴马大学）
Convolutional neural networks (CNNs) are becoming increasingly deeper, wider, and non-linear because of the growing demand on prediction accuracy and analysis quality. The wide and deep CNNs, however, require a large amount of computing resources and processing time. Many previous works have studied model pruning to improve inference performance, but little work has been done for effectively reducing training cost. In this paper, we propose ClickTrain: an efficient and accurate end-to-end training and pruning framework for CNNs. Different from the existing pruning-during-training work, ClickTr…
Convolutional Neural Networks (CNNs) have a large number of parameters and take significantly large hardware resources to compute, so edge devices struggle to run high-level networks. This paper proposes a novel method to reduce the parameters and FLOPs for computational efficiency in deep learning models. We introduce accuracy and efficiency coefficients to control the trade-off between the accuracy of the network and its computing efficiency. The proposed Rewarded meta-pruning algorithm trains a network to generate weights for a pruned model chosen based on the approximate parameters of the …
University of Science and Technology Beijing（北京科技大学）；Institute of Automation, Chinese Academy of Sciences（中国科学院自动化研究所）；University of Chinese Academy of Sciences（中国科学院大学）
Convolutional Neural Networks (CNNs) has been applied in numerous Internet of Things (IoT) devices for multifarious downstream tasks. However, with the increasing amount of data on edge devices, CNNs can hardly complete some tasks in time with limited computing and storage resources. Recently, filter pruning has been regarded as an effective technique to compress and accelerate CNNs, but existing methods rarely prune CNNs from the perspective of compressing high-dimensional tensors. In this paper, we propose a novel theory to find redundant information in three-dimensional tensors, namely Quan…
Hefei University of Technology（合肥工业大学）；Engineering Research Center of Safety Critical Industrial Measurement and Control Technology, Ministry of Education（教育部安全关键工业测控技术工程研究中心）
As the convolutional neural network (CNN) gets deeper and wider in recent years, the requirements for the amount of data and hardware resources have gradually increased. Meanwhile, CNN also reveals salient redundancy in several tasks. The existing magnitude-based pruning methods are efficient, but the performance of the compressed network is unpredictable. While the accuracy loss after pruning based on the structure sensitivity is relatively slight, the process is time-consuming and the algorithm complexity is notable. In this article, we propose a novel automatic channel pruning method (ACP).…
George Mason University（乔治梅森大学）；Clarkson University（克拉克森大学）
Based on filter magnitude ranking (e.g. L1 norm), conventional filter pruning methods for Convolutional Neural Networks (CNNs) have been proved with great effectiveness in computation load reduction. Although effective, these methods are rarely analyzed in a perspective of filter functionality. In this work, we explore the filter pruning and the retraining through qualitative filter functionality interpretation. We find that the filter magnitude based method fails to eliminate the filters with repetitive functionality. And the retraining phase is actually used to reconstruct the remained filte…
Deep convolutional neural networks (CNNs) are indispensable to state-of-the-art computer vision algorithms. However, they are still rarely deployed on battery-powered mobile devices, such as smartphones and wearable gadgets, where vision algorithms can enable many revolutionary real-world applications. The key limiting factor is the high energy consumption of CNN processing due to its high computational complexity. While there are many previous efforts that try to reduce the CNN model size or amount of computation, we find that they do not necessarily result in lower energy consumption, and th…
Structured channel pruning has been shown to significantly accelerate inference time for convolution neural networks (CNNs) on modern hardware, with a relatively minor loss of network accuracy. Recent works permanently zero these channels during training, which we observe to significantly hamper final accuracy, particularly as the fraction of the network being pruned increases. We propose Soft Masking for cost-constrained Channel Pruning (SMCP) to allow pruned channels to adaptively return to the network while simultaneously pruning towards a target cost constraint. By adding a soft mask re-pa…
University of California, Santa Barbara（加州大学圣巴巴拉分校）；Tsinghua University（清华大学）
Crossbar architecture based devices have been widely adopted in neural network accelerators by taking advantage of the high efficiency on vector-matrix multiplication (VMM) operations. However, in the case of convolutional neural networks (CNNs), the efficiency is compromised dramatically due to the large amounts of data reuse. Although some mapping methods have been designed to achieve a balance between the execution throughput and resource overhead, the resource consumption cost is still huge while maintaining the throughput. Network pruning is a promising and widely studied leverage to shri…
The existence of redundancy in Convolutional Neural Networks (CNNs) enables us to remove some filters/channels with acceptable performance drops. However, the training objective of CNNs usually tends to minimize an accuracy-related loss function without any attention paid to the redundancy, making the redundancy distribute randomly on all the filters, such that removing any of them may trigger information loss and accuracy drop, necessitating a following finetuning step for recovery. In this paper, we propose to manipulate the redundancy during training to facilitate network pruning. To this e…
Pruning By Explaining Revisited: Optimizing Attribution Methods to Prune CNNs and Transformers
Fraunhofer Heinrich-Hertz-Institute（弗劳恩霍夫海因茨·赫兹研究所）；Technische Universität Berlin（柏林工业大学）；BIFOLD – Berlin Institute for the Foundations of Learning and Data（柏林学习与数据基础研究所（BIFOLD））
Department of Computer Science and Engineering（计算机科学与工程系）；Robert Bosch Centre for Data Science and AI (RBC-DSAI)（罗伯特·博世数据科学与人工智能中心（RBC-DSAI））；Indian Institute of Technology Madras（印度理工学院马德拉斯分校）
Recently there has been a lot of work on pruning filters from deep convolutional neural networks (CNNs) with the intention of reducing computations. The key idea is to rank the filters based on a certain criterion (say, $l_1$-norm, average percentage of zeros, etc) and retain only the top ranked filters. Once the low scoring filters are pruned away the remainder of the network is fine tuned and is shown to give performance comparable to the original unpruned network. In this work, we report experiments which suggest that the comparable performance of the pruned network is not due to the specif…
Centrum Wiskunde & Informatica（数学与计算机科学中心）；Leiden Institute of Advanced Computer Science（莱顿高级计算机科学研究所）
Neural network pruning techniques can substantially reduce the computational cost of applying convolutional neural networks (CNNs). Common pruning methods determine which convolutional filters to remove by ranking the filters individually, i.e., without taking into account their interdependence. In this paper, we advocate the viewpoint that pruning should consider the interdependence between series of consecutive operators. We propose the LongEst-chAiN (LEAN) method that prunes CNNs by using graph-based algorithms to select relevant chains of convolutions. A CNN is interpreted as a graph, with…
Convolutional Neural Networks (CNNs) compression is crucial to deploying these models in edge devices with limited resources. Existing channel pruning algorithms for CNNs have achieved plenty of success on complex models. They approach the pruning problem from various perspectives and use different metrics to guide the pruning process. However, these metrics mainly focus on the model's `outputs' or `weights' and neglect its `interpretations' information. To fill in this gap, we propose to address the channel pruning problem from a novel perspective by leveraging the interpretations of a model …
Isfahan University of Technology（伊斯法罕理工大学）；McMaster University（麦克马斯特大学）
Filters are the essential elements in convolutional neural networks (CNNs). Filters are corresponded to the feature maps and form the main part of the computational and memory requirement for the CNN processing. In filter pruning methods, a filter with all of its components, including channels and connections, are removed. The removal of a filter can cause a drastic change in the network's performance. Also, the removed filters cannot come back to the network structure. We want to address these problems in this paper. We propose a CNN pruning method based on filter attenuation in which weak fi…
Computer Network Information Center, Chinese Academy of Sciences（中国科学院计算机网络信息中心）；University of Chinese Academy of Sciences（中国科学院大学）；Visa Research（Visa研究院）；The Ohio State University（俄亥俄州立大学）
Convolutional neural networks (CNNs) have demonstrated extraordinarily good performance in many computer vision tasks. The increasing size of CNN models, however, prevents them from being widely deployed to devices with limited computational resources, e.g., mobile/embedded devices. The emerging topic of model pruning strives to address this problem by removing less important neurons and fine-tuning the pruned networks to minimize the accuracy loss. Nevertheless, existing automated pruning solutions often rely on a numerical threshold of the pruning criteria, lacking the flexibility to optimal…
College of Information Engineering, Zhejiang University of Technology（浙江工业大学信息工程学院）；Hang Zhou, People’s Republic of China（杭州市（中华人民共和国））
Automated Machine Learning(Auto-ML) pruning methods aim at searching a pruning strategy automatically to reduce the computational complexity of deep Convolutional Neural Networks(deep CNNs). However, some previous work found that the results of many Auto-ML pruning methods cannot even surpass the results of the uniformly pruning method. In this paper, the ineffectiveness of Auto-ML pruning which is caused by unfull and unfair training of the supernet is shown. A deep supernet suffers from unfull training because it contains too many candidates. To overcome the unfull training, a stage-wise pru…
Convolutional neural networks (CNNs) are typically over-parameterized, bringing considerable computational overhead and memory footprint in inference. Pruning a proportion of unimportant filters is an efficient way to mitigate the inference cost. For this purpose, identifying unimportant convolutional filters is the key to effective filter pruning. Previous work prunes filters according to either their weight norms or the corresponding batch-norm scaling factors, while neglecting the sequential dependency between adjacent layers. In this paper, we further develop the norm-based importance esti…
Channel pruning has received ever-increasing focus on network compression. In particular, class-discrimination based channel pruning has made major headway, as it fits seamlessly with the classification objective of CNNs and provides good explainability. Prior works singly propose and evaluate their discriminant functions, while further study on the effectiveness of the adopted metrics is absent. To this end, we initiate the first study on the effectiveness of a broad range of discriminant functions on channel pruning. Conventional single-variate binary-class statistics like Student's T-Test a…
Southern University of Science and Technology（南方科技大学）；University of Technology Sydney（悉尼科技大学）；Fudan University（复旦大学）
This paper proposed a Soft Filter Pruning (SFP) method to accelerate the inference procedure of deep Convolutional Neural Networks (CNNs). Specifically, the proposed SFP enables the pruned filters to be updated when training the model after pruning. SFP has two advantages over previous works: (1) Larger model capacity. Updating previously pruned filters provides our approach with larger optimization space than fixing the filters to zero. Therefore, the network trained by our method has a larger model capacity to learn from the training data. (2) Less dependence on the pre-trained model. Large …
The success of convolutional neural networks (CNNs) in computer vision applications has been accompanied by a significant increase of computation and memory costs, which prohibits its usage on resource-limited environments such as mobile or embedded devices. To this end, the research of CNN compression has recently become emerging. In this paper, we propose a novel filter pruning scheme, termed structured sparsity regularization (SSR), to simultaneously speedup the computation and reduce the memory overhead of CNNs, which can be well supported by various off-the-shelf deep learning libraries. …
The advancement of convolutional neural networks (CNNs) on various vision applications has attracted lots of attention. Yet the majority of CNNs are unable to satisfy the strict requirement for real-world deployment. To overcome this, the recent popular network pruning is an effective method to reduce the redundancy of the models. However, the ranking of filters according to their "importance" on different pruning criteria may be inconsistent. One filter could be important according to a certain criterion, while it is unnecessary according to another one, which indicates that each criterion is…
Towards Efficient Convolutional Neural Network for Embedded Hardware via Multi-Dimensional Pruning
School of Computer Science and Engineering, Nanyang Technological University（南洋理工大学计算机科学与工程学院）；HP-NTU Digital Manufacturing Corporate Lab, Nanyang Technological University（惠普-南洋理工大学数字制造联合实验室）；Department of Computer Science, Norwegian University of Science and Technology（挪威科技大学计算机科学系）
In order to deploy deep convolutional neural networks (CNNs) on resource-limited devices, many model pruning methods for filters and weights have been developed, while only a few to layer pruning. However, compared with filter pruning and weight pruning, the compact model obtained by layer pruning has less inference time and run-time memory usage when the same FLOPs and number of parameters are pruned because of less data moving in memory. In this paper, we propose a simple layer pruning method using fusible residual convolutional block (ResConv), which is implemented by inserting shortcut con…
Beijing National Research Center for Information Science and Technology (BNRist)（北京信息科学与技术国家研究中心（BNRist））；Tsinghua University（清华大学）；University of Warwick（华威大学）；Hangzhou Dianzi University（杭州电子科技大学）
It is not easy to design and run Convolutional Neural Networks (CNNs) due to: 1) finding the optimal number of filters (i.e., the width) at each layer is tricky, given an architecture; and 2) the computational intensity of CNNs impedes the deployment on computationally limited devices. Oracle Pruning is designed to remove the unimportant filters from a well-trained CNN, which estimates the filters' importance by ablating them in turn and evaluating the model, thus delivers high accuracy but suffers from intolerable time complexity, and requires a given resulting width but cannot automatically …
Sparse methods and the use of Winograd convolutions are two orthogonal approaches, each of which significantly accelerates convolution computations in modern CNNs. Sparse Winograd merges these two and thus has the potential to offer a combined performance benefit. Nevertheless, training convolution layers so that the resulting Winograd kernels are sparse has not hitherto been very successful. By introducing a Winograd layer in place of a standard convolution layer, we can learn and prune Winograd coefficients "natively" and obtain sparsity level beyond 90% with only 0.1% accuracy loss with Ale…
