聚乙烯吡咯烷酮对高压下甲烷水合物体系动态粘度的影响:浓度、分子量和剪切速率的研究
Effects of Poly(vinylpyrrolidone) on the Dynamic Viscosity of Methane Hydrate Systems at High-Pressure Driving Forces: Investigation of Concentration, Molecular Weight, and Shear Rate
摘要:
在压力高达30 MPag的高压流变仪中测量具有700和7000重量ppm、分子量为40,000(PVP 40)和360,000(PVP 360)Da、剪切速率为400和80 1/s的聚(乙烯基吡咯烷酮)(PVP)的甲烷水合物浆料的粘度,并与纯水体系进行比较。添加剂成功地减少了高粘度浆料的形成,但在低浓度下不能延迟水合物附聚在后期生长阶段。700 ppm的PVP 40溶液生长至50 mPa.s所需的平均相对时间是水参考值的1.9倍,但仅为达到200 mPa. s的1.2倍。对于更高浓度和更高分子量组观察到改进的抑制,其中达到50 mPa.s的相对时间分别是水参考值的8.2和2.6倍。虽然添加剂表现出反成核性能和抑制晶体生长的初始,他们加快了水合物集群的团聚速率,并可能削弱水合物的机械性能。
英文摘要:
The viscosity of methane hydrate slurries with poly(vinylpyrrolidone) (PVP) at 700 and 7000 ppm by weight, molecular weights of 40,000 (PVP40) and 360,000 (PVP360) Da, and shear rates of 400 and 80 1/s, were measured in a high-pressure rheometer with pressures up to 30 MPag and compared to pure water systems. The additives successfully reduced the formation of high-viscosity slurries, but at low concentrations were incapable of delaying hydrate agglomeration at the late growth stage. The average relative time required for PVP40 solutions at 700 ppm to grow to 50 mPa.s was 1.9 times the water reference value, but only 1.2 times to reach 200 mPa.s. Improved inhibition was observed for the higher concentration and higher molecular weight sets, where the relative time to reach 50 mPa.s were 8.2 and 2.6 times the water reference value, respectively. While the additives demonstrated anti-nucleation properties and suppressed crystal growth initially, they accelerated the hydrate clusters agglomeration rate, and potentially weakened the hydrate mechanical properties.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。