热刺激时甲烷水合物的天然气生产;采用径向坐标的分析研究
Gas production from methane hydrates upon thermal stimulation; an analytical study employing radial coordinates
摘要:
建立了考虑井筒结构影响的多孔介质中热刺激条件下甲烷水合物分解的径向解析模型。分析方法是基于相似性的解决方案,采用移动边界分离的解离和未解离的区域。考虑了两种不同的热源:i)线热源;和ii)具有特定厚度的井筒热源,所述井筒热源由套管、砾石和水泥组成。研究了考虑不同初始和边界条件以及储层性质的温度和压力分布、解离速率和能量效率。由于线热源模型不考虑井筒厚度内的热传导,直接将热量从热源传递到储层,因此线热源模型的分解速率和产气量均高于井筒加热模型。提高热源温度或降低其压力会增加气体产量。然而,同时使用它们会导致更大的气体产量,但会降低能源效率。热解速率与储层的孔隙度、热扩散系数和热导率有直接关系,而与储层的渗透率无关。
英文摘要:
In this study, a radial analytical model for methane hydrate dissociation upon thermal stimulation in porous media considering the effect of wellbore structure has been developed. The analytical approach is based on a similarity solution employing a moving boundary separating the dissociated and undissociated zones. Two different heat sources are considered: i) line heat source; and ii) wellbore heat source with specific thickness consisting of casing, gravel, and cement. The temperature and pressure distributions, dissociation rate, and energy efficiency considering various initial and boundary conditions, and reservoir properties are investigated. Direct heat transfer from the heat source to the reservoir without considering the heat conduction in the wellbore thickness causes higher the dissociation rate and gas production in the line heat source model compared to the wellbore heating model. Increasing the heat source temperature or decreasing its pressure increases gas production. However, employing them simultaneously results in greater gas production but reduces energy efficiency. The dissociation rate has direct relation with porosity, thermal diffusivities, and thermal conductivities of the reservoir, but is not dependent on the reservoirs permeability.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。