Multi-rotor Unmanned Aerial Vehicles (UAVs) need to tilt in order to move; this modifies the UAV's antenna orientation. We consider the scenario where a multi-rotor UAV serves as a communication relay between a Base Station (BS) and another UAV. We propose a framework to generate feasible trajectories for the multi-rotor UAV relay while considering its motion dynamics and the motion-induced changes of the antenna orientation. The UAV relay's trajectory is optimized to maximize the end-to-end number of bits transmitted. Numerical simulations in MATLAB and Gazebo show the benefits of accounting for the antenna orientation variations due to the UAV tilt.
Rylls tilt-rotor is a UAV with eight inputs; the four magnitudes of the thrusts as well as four tilting angles of the thrusts can be specified in need, e.g., based on a control rule. Despite of the success in simulation, conventional feedback linearization witnesses the over-intensive change in the inputs while applying to stabilize Rylls tilt-rotor. Our previous research thus put the extra procedure named gait plan forward to suppress the unexpected changes in the tilting angles. Accompanying the Two Color Map Theorem, the tilting-angles are planned robustly and continuously. The designed gai…
Among the tilt-rotors (quadrotors) developed in the last decades, Rylls model with eight inputs (four magnitudes of the thrusts and four tilting angles) attracted great attention. Typical feedback linearization maneuvers all the eight inputs with a united control rule to stabilize this tilt-rotor. Instead of assigning the tilting angles by the control rule, the recent research predetermined the tilting angles and left the magnitudes of the thrusts the only control signals. These tilting angles are designed to mimic the cat-trot gait, avoiding the singular decoupling matrix feedback linearizati…
This article presents the four-dimensional surfaces which instruct the gait plan for a tilt-rotor. The previous gaits analyzed in the tilt-rotor research are inspired by animals; no theoretical base backs the robustness of these gaits. This research deduces the gaits by diminishing the effect of the attitude of the tilt-rotor for the first time. Four-dimensional gait surfaces are subsequently found, on which the gaits are expected to be robust to the attitude. These surfaces provide the region where the gait is suggested to be planned. However, a discontinuous region may hinder the gait plan p…
With the introduction of the laterally bounded forces, the tilt-rotor gains more flexibility in the controller design. Typical feedback linearization methods utilize all the inputs in controlling this vehicle; the magnitudes as well as the directions of the thrusts are maneuvered simultaneously based on a unified control rule. Although several promising results indicate that these controllers may track the desired complicated trajectories, the tilting angles are required to change relatively fast or in large scale during the flight, which turns to be a challenge in application. The recent gait…
Tilt-Ropter: A Fully Actuated Hybrid Aerial-Terrestrial Vehicle with Tilt Rotors and Passive Wheels
Department of Mechanical and Automation Engineering, The Chinese University of Hong Kong（机械与自动化工程系，香港中文大学）；Faculty of Engineering, The University of Hong Kong（工程学院，香港大学）；Peng Cheng Laboratory（鹏城实验室）
Communications-Aware NMPC for Multi-Rotor Aerial Relay Networks Under Jamming Interference
Mohammed VI Polytechnic University（穆罕默德六世理工大学）；University of Sannio in Benevento（贝内文托桑尼奥大学）；University of Twente（特温特大学）；Sapienza University of Rome（罗马大学）
Conventional quadrotors received great attention in trajectory design and fault-tolerant control in these years. The direction of each thrust is perpendicular to the body because of the geometrics in mechanical design. Comparing with the conventional quadrotor, a novel quadrotor named quad-tilt-rotor brings better freedom in manipulating the thrust vector. Quad-tilt-rotor augments the additional degrees of freedom in the thrust, providing the possibility of violating the normal direction of the thrust in the conventional quadrotor. This provides the ability of greater agility in control. This …
Conventional Feedback-Linearization-based controller, applied to the tilt-rotor (eight inputs), results in the extensive changes in the tilting angles, which are not expected in practice. To solve this problem, we introduce the novel concept UAV gait to restrict the tilting angles. The gait plan was initially to solve the control problems for quadruped (four-legged) robots. Transplanting this approach, accompanied by feedback linearization, to the tiltrotor may cause the well-known non-invertible problem in the decoupling matrix. In this research, we explore the invertible gait for the tiltrot…
Enabling vertical take-off and landing while providing the ability to fly long ranges opens the door to a wide range of new real-world aircraft applications while improving many existing tasks. Tiltrotor vertical take-off and landing (VTOL) unmanned aerial vehicles (UAVs) are a better choice than fixed-wing and multirotor aircraft for such applications. Prior works on these aircraft have addressed aerodynamic performance, design, modeling, and control. However, a less explored area is the study of their potential fault tolerance due to their inherent redundancy, which allows them to tolerate s…
Geometric Backstepping Control of Omnidirectional Tiltrotors Incorporating Servo-Rotor Dynamics for Robustness against Sudden Disturbances
Department of Aerospace Engineering, Seoul National University (SNU)（航空航天工程系，首尔国立大学）；Robotics Institute, Carnegie Mellon University（机器人研究所，卡内基梅隆大学）；Department of Mechanical Science and Engineering, University of Illinois Urbana-Champaign（机械科学与工程系，伊利诺伊大学厄巴纳-香槟分校）
In this paper, we present a novel developmental reinforcement learning-based controller for a quadcopter with thrust vectoring capabilities. This multirotor UAV design has tilt-enabled rotors. It utilizes the rotor force magnitude and direction to achieve the desired state during flight. The control policy of this robot is learned using the policy transfer from the learned controller of the quadcopter (comparatively simple UAV design without thrust vectoring). This approach allows learning a control policy for systems with multiple inputs and multiple outputs. The performance of the learned po…
Czech Technical University in Prague（捷克理工大学）；University of Twente（特温特大学）
A perception-aware Nonlinear Model Predictive Control (NMPC) strategy aimed at performing vision-based target tracking and collision avoidance with a multi-rotor aerial vehicle is presented in this paper. The proposed control strategy considers both realistic actuation limits at the torque level and visual perception constraints to enforce the visibility coverage of a target while complying with the mission objectives. Furthermore, the approach allows to safely navigate in a workspace area populated by dynamic obstacles with a ballistic motion. The formulation is meant to be generic and set up…
Hybrid Neural Network and Conventional Controller Approach for Robust Control of Highly Unstable Systems: Application to Tilt-Rotor Control
Advanced Research Lab for Control and Agricultural Robotics (Sharif AgRoLab)（控制与农业机器人高级研究实验室（谢尔生产大学AgRoLab））；Department of Mechanical Engineering, Sharif University of Technology, Tehran, Iran（技术大学机械工程系，德黑兰，伊朗）
Suspended Load Path Tracking Control Using a Tilt-rotor UAV Based on Zonotopic State Estimation
Graduate Program in Electrical Engineering, Federal University of Minas Gerais, Belo Horizonte, MG 31270-901, Brazil（巴西联邦矿务工程师学院电气工程研究生项目）；Department of Electronics Engineering, Federal University of Minas Gerais, Belo Horizonte, MG 31270-901, Brazil（巴西联邦矿务工程师学院电子工程系）
Traditional aerial vehicles are usually custom-designed for specific tasks. Although they offer an efficient solution, they are not always able to adapt to changes in the task specification, e.g., increasing the payload. This applies to quadrotors, having a maximum payload and only four controllable degrees of freedom, limiting their adaptability to the task's variations. We propose a versatile modular robotic system that can increase its payload and degrees of freedom by assembling heterogeneous modules; we call it H-ModQuad. It consists of cuboid modules propelled by quadrotors with tilted p…
University of Cincinnati（辛辛那提大学）；Indian Institute of Technology, Kanpur（印度理工学院坎普尔分校）
In this paper, we present an autonomous flight controller for a quadcopter with thrust vectoring capabilities. This UAV falls in the category of multirotors with tilt-motion enabled rotors. Since the vehicle considered is over-actuated in nature, the dynamics and control allocation have to be analysed carefully. Moreover, the possibility of hovering at large attitude maneuvers of this novel vehicle requires singularity-free attitude control. Hence, quaternion state feedback is utilized to compute the control commands for the UAV motors while avoiding the gimbal lock condition experienced by Eu…
