高效多周期折叠整数乘法器
Efficient Multi-Cycle Folded Integer Multipliers
AI总结:
提出基于 Schoolbook 与 Karatsuba 的可定制多周期折叠整数乘法器生成器,在 8–128 位下显著降低面积、能耗和峰值功耗。
摘要:
大位宽快速组合乘法器会占用大量硅片面积,从而推高功耗。通过资源共享(即折叠)可以减少面积,但代价是吞吐量降低,这对某些应用是可接受的。本工作探索了多周期折叠整数乘法器(Multi-Cycle folded Integer Multiplier,MCIM)设计的多种架构,这些架构基于 Schoolbook 和 Karatsuba 方法。应用有时要求每个周期执行分数数量的乘法。例如,某算法可能每周期仅需 3.5 次乘法。在这种情况下,使用 3 个吞吐量为 1 的乘法器,再加一个吞吐量为 $1/2$ 的较小乘法器,就足以维持该算法的吞吐量。我们的 MCIM 设计生成器支持在吞吐量、延迟和时钟频率方面进行定制。使用脚本针对各种参数值对 MCIM 设计进行了综合与验证。ASIC 综合结果表明,相对于直接综合 * 运算符,吞吐量为 $1/2$ 的 MCIM 设计在 8 至 128 位位宽下可节省最高 44% 的面积。此外,MCIM 设计可实现最高 33% 的能耗节省和 65% 的平均峰值功耗降低。
英文摘要:
Fast combinational multipliers with large bit widths can occupy significant silicon area, which also drives up power consumption. Area can be reduced through resource sharing (i.e., folding) at the expense of lower throughput, which is acceptable for some applications. This work explores multiple architectures for Multi-Cycle folded Integer Multiplier (MCIM) designs, which are based on Schoolbook and Karatsuba approaches. Applications sometimes require a fractional number of multiplications to be performed per cycle. For example, an algorithm may only require 3.5 multiplications per cycle. In such a case, 3 multipliers with a throughput of 1 plus an additional smaller multiplier with a throughput of $1/2$ would be sufficient to maintain the algorithm's throughput. Our MCIM design generator offers customization in terms of throughput, latency, and clock frequency. MCIM designs were synthesized and verified for various parameter values using scripts. ASIC synthesis results show that MCIM designs with a throughput of $1/2$ offer area savings of up to 44% for bit widths of 8 to 128 with respect to directly synthesizing the * operator. Additionally, MCIM designs can offer up to 33% energy savings and 65% average peak power reduction.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。