我们稳定电阻的熔融淬火非晶Ge 2Sb 2 Te 5(a-GST)相变存储器(PCM)线单元,通过大幅加速电阻漂移,并使其在几分钟内停止与应用程序的高电场应力。漂移的加速在所有温度(85 K - 300 K)下在电场> 26 MV/m处清楚地可观察到,并且与强制通过器件的电流无关,该电流是温度的强函数。在85 K - 300 K范围内测量的稳定化电池的低场(< 21 MV/m)I-V特性与二维热激活跳跃输运模型拟合良好,得到在场方向上的跳跃距离和激活能范围为85 K时的2 nm和0.2 eV至300 K时的6 nm和0.4 eV。跳跃运输似乎是更好地对齐在较高的温度下的场方向。高场电流对电压的响应明显更强,并显示出明显不同的特性:不同温度下的微分电阻外推到一个点(8.9x10-8 ohm.cm),与60 K时铜的电阻率相当,为65.6 +/- 0.4 MV/m。引起高场区电流大幅增加的物理机制也加速了电阻漂移。我们根据实验结果构建了场和温度相关的导电模型,并将其与我们的电热有限元器件模拟框架相结合,分析PCM器件的复位,设置和读取操作。
英文摘要:
We stabilize resistance of melt-quenched amorphous Ge2Sb2Te5 (a-GST) phase change memory (PCM) line cells by substantially accelerating resistance drift and bringing it to a stop within a few minutes with application of high electric field stresses. The acceleration of drift is clearly observable at electric fields > 26 MV/m at all temperatures (85 K - 300 K) and is independent of the current forced through the device, which is a strong function of temperature. The low-field (< 21 MV/m) I-V characteristics of the stabilized cells measured in 85 K - 300 K range fit well to a 2D thermally-activated hopping transport model, yielding hopping distances in the direction of the field and activation energies ranging from 2 nm and 0.2 eV at 85 K to 6 nm and 0.4 eV at 300 K. Hopping transport appears to be better aligned with the field direction at higher temperatures. The high-field current response to voltage is significantly stronger and displays a distinctly different characteristic: the differential resistances at different temperatures extrapolate to a single point (8.9x10-8 ohm.cm), comparable to the resistivity of copper at 60 K, at 65.6 +/- 0.4 MV/m. The physical mechanisms that give rise to the substantial increase in current in the high-field regime also accelerate resistance drift. We constructed field and temperature dependent conduction models based on the experimental results and integrated it with our electro-thermal finite element device simulation framework to analyze reset, set and read operations of PCM devices.
Tetrahedral amorphous carbon resistive memories with graphene-based electrodes
电阻开关存储器是硅基存储器的替代品,硅基存储器面临缩放和高功耗问题。四面体无定形碳(ta-C)显示可逆的、非挥发性的电阻切换。在这里,我们报告的极性无关的ta-C电阻式存储器件与石墨烯为基础的电极。我们的器件显示开/关电阻比$\sim$ 4 x $10^5$,比金属电极高10倍,开关功率没有增加,功率密度低$\sim$ 14 $μ$ W/ $μ$ m $^2$。我们将此归因于由于狄拉克点附近石墨烯的低态密度而抑制的隧穿电流,这与从量子点接触模型导出的电流-电压特性一致。我们的器件还具有多个电阻状态。这允许每个单元存储多于一位。这可以在一系列信号处理/计算类型的操作中被利用,例如实现逻辑、提供突触和神经元样模拟以及在非冯·诺依曼架构中执行模拟信号处理
Fast recovery of ion-irradiation-induced defects in Ge2Sb2Te5 thin films at room temperature
相变材料通过在非晶态和晶态之间提供可逆的、可重复的和快速的切换,伴随着电学和光学性质的大变化,服务于从非易失性电子存储器到光学数据存储的广泛应用领域。在这里,我们演示了如何离子辐照可以用来定制的初始结晶Ge 2Sb 2 Te 5(GST)薄膜通过故意创建晶格缺陷的障碍。我们发现,室温下连续Ar离子辐照GST薄膜,当n_dpa超过0.6(岩盐GST)和3(六方GST)时,GST完全非晶化。虽然从岩盐到无定形GST的过渡是由通过晶格缺陷的积累的渐进非晶化引起的,但在离子辐照后,在六方GST中发生了几个过渡。在六方GST中,点缺陷和小缺陷簇的产生导致驱动电子金属-绝缘体转变的本征空位层(范德华能隙)的无序。无序度的增加会导致六方晶向岩盐晶的结构转变,进而导致非晶化。此外,我们观察到不同的退火行为的缺陷岩盐和六角GST。与岩盐GST相比,六方GST中更高的非晶化阈值是由增加的缺陷退火速率引起的,即,对离子束引起的无序具有更高的抵抗力。此外,我们观察到,在GST中的缺陷的恢复是在室温下的秒或更短的时间尺度上。