The flow of deformable particles, such as droplets, dragged by a fluid, through a network of narrow pores inside rocks or other porous media is key in a range of applications, from enhanced oil recovery and water filtration to lab on a chip sorting of cells. The collective dynamics and its impact on the flow are poorly understood. Here, using droplets as a prototype, we show that collective transport can occur for conditions under which a single particle would get trapped at a pore channel. When a series of droplets gets trapped, the fluids flow is affected significantly, leading to an increase of the pressure difference across the pore channels, which in turn squeezes the particles through the channels. We analyze the conditions for a single droplet to flow through one pore and derive the corresponding Bond number. We also obtain a rule for the collective flow of droplets in porous media.
Compared to smooth surfaces, droplet spreading on porous surfaces is more complex and has relevance in many engineering applications. In this work, we investigate the infiltration dynamics of molten sand droplets on structured porous surfaces using the multiphase many-body dissipative particle dynamics (mDPD) method. We carry out three-dimensional simulations with different equilibrium contact angles and surface porosities. The temporal evolution of the radius of the wetted area follows a power law, as in the case of a smooth surface. The infiltration rate on the other hand is dictated by the …
Droplet mobility under shear flows is important in a wide range of engineering applications, e.g., fog collection, and self-cleaning surfaces. For structured surfaces to achieve superhydrophobicity, the removal of stains adhered within the microscale surface features strongly determines the functional performance and durability. In this study, we numerically investigate the shear-induced mobility of the droplet trapped within porous surfaces. Through simulations covering a wide range of flow conditions and porous geometries, three droplet mobility modes are identified, i.e., the stick-slip, cr…
Droplet wicking and evaporation in porous nanochannels is experimentally studied on a heated surface at temperatures ranging from 35oC to 90oC. The fabricated geometry consists of cross-connected nanochannels of height 728 nm with micropores of diameter 2 um present at every channel intersection; the pores allow water from a droplet placed on the top surface to wick into the channels. Droplet volume is also varied and a total of 16 experimental cases are conducted. Wicking characteristics such as wicked distance, capillary pressure, viscous resistance and propagation coefficient are obtained a…
Tuna-step: Tunable Parallelized Step Emulsification for the Generation of Droplets with Dynamic Volume Control to 3D Print Functionally Graded Porous Materials
Surface icing affects the safety and performance of numerous processes in technology. Previous studies mostly investigated freezing of individual droplets. The interaction among multiple droplets during freezing is investigated less, especially on nanotextured icephobic surfaces, despite its practical importance as water droplets never appear in isolation, but in groups. Here we show that freezing of a supercooled droplet leads to spontaneous self-heating and induces strong vaporization. The resulting, rapidly propagating vapor front causes immediate cascading freezing of neighboring supercool…
We discuss the flow field and propulsion velocity of active droplets, which are driven by body forces residing on a rigid gel. The latter is modelled as a porous medium which gives rise to permeation forces. In the simplest model, the Brinkman equation, the porous medium is characterised by a single length scale $\ell$ --the square root of the permeability. We compute the flow fields inside and outside of the droplet as well as the energy dissipation as a function of $\ell$. We furthermore show that there are optimal gel fractions, giving rise to maximal linear and rotational velocities. In th…
We investigate the 3D structure and drying dynamics of complex mixtures of emulsion droplets and colloidal particles, using confocal microscopy. Air invades and rapidly collapses large emulsion droplets, forcing their contents into the surrounding porous particle pack at a rate proportional to the square of the droplet radius. By contrast, small droplets do not collapse, but remain intact and are merely deformed. A simple model coupling the Laplace pressure to Darcy's law correctly estimates both the threshold radius separating these two behaviors, and the rate of large-droplet evacuation. Fin…
Micro and nanodroplets have many important applications such as in drug delivery, liquid-liquid extraction, nanomaterial synthesis and cosmetics. A commonly used method to generate a large number of micro or nanodroplets in one simple step is solvent exchange (also called nanoprecipitation), in which a good solvent of the droplet phase is displaced by a poor one, generating an oversaturation pulse that leads to droplet nucleation. Despite its crucial importance, the droplet growth resulting from the oversaturation pulse in this ternary system is still poorly understood. We experimentally and t…
Droplet microfluidics, in which micro-droplets serve as individual reactors, has enabled a wide range of high-throughput biochemical processes. Unlike solid wells typically used in current biochemical assays, droplets are subject to instability and can undergo breakup, especially under fast flow conditions. Although the physics of single drops has been studied extensively, the flow of crowded drops or concentrated emulsions, where droplet volume fraction exceeds 80 percent, is relatively unexplored in microfluidics. In this article and the related invited lecture from the 74th Annual Meeting o…
Microscopic active droplets are able to swim autonomously in viscous flows: this puzzling feature stems from solute exchanges with the surrounding fluid via surface reactions or their spontaneous solubilisation, and the interfacial flows resulting from these solutes' gradients. Contrary to asymmetric active colloids, these isotropic droplets swim spontaneously by exploiting the nonlinear coupling of solute transport with self-generated Marangoni flows, which is also responsible for secondary transitions to more complex individual and collective dynamics. Thanks to their simple design and their…
Surface acoustic waves (SAW) can concentrate micro-particles in droplets within seconds. Yet, the mechanism is not clear and existing explanations fail by several orders of magnitude. In this paper, we analyze the effect of fluid viscosity and particle size on SAW-driven collective particle dynamics in droplets. In most of our experiments, the particles do not aggregate but instead remain away from the droplet center, thereby forming "black holes". We show that the black holes are due to steric hindrance wherein the poloidal streamlines that should drive particles to the center of the droplet …
Colloidal particles hold promise for mobilizing and removing trapped immiscible fluids from porous media, with implications for key energy and water applications. Most studies focus on accomplishing this goal using particles that can localize at the immiscible fluid interface. Therefore, researchers typically seek to optimize the surface activity of particles, as well as their ability to freely move through a pore space with minimal deposition onto the surrounding solid matrix. Here, we demonstrate that deposition can, surprisingly, promote mobilization of a trapped fluid from a porous medium …
Porous asphalt (PA) is an open-graded porous material with a porosity of 20%, allowing fast drainage of rain and improving driving and acoustic conditions. However, the high porosity leads to significant contact with water resulting in a shorter life expectancy. To improve the durability and performance of PA, the distribution of water and its residence time have to be understood which entails capturing diverse multiphase phenomena. For these reasons, a numerical study is performed to analyze in detail the fluid transport mechanisms at play in PA, towards estimating the liquid distribution ins…
Microfluidic techniques have been extensively developed to realize micro-total analysis systems in a small chip. For microanalysis, electro-magnetic forces have generally been utilized for the trapping of objects, but hydrodynamics has been little explored despite its relevance to pattern formation. Here, we report that water-in-oil (W/O) droplets can be transported in the grid of an array of other large W/O droplets. As each droplet approaches an interspace of the large droplet array, while exhibiting persistent back-and-forth motion, it is conveyed at a velocity equal to the droplet array. W…
Sindy Tang is assistant professor at in the Department of Mechanical Engineering at Stanford University. In this contribution she describes how her team uses droplet microfluidics to identify bacteria that could increase the efficiency of generation of bioplastics, and how this work motivated them to investigate the physics and design criteria necessary for further up-scaling of the droplet technology.
Recent experiments show that quasi-one-dimensional lattices of self-propelled droplets exhibit collective instabilities in the form of out-of-phase oscillations and solitary-like waves. This hydrodynamic lattice is driven by the external forcing of a vertically vibrating fluid bath, which invokes a field of subcritical Faraday waves on the bath surface, mediating the spatio-temporal droplet coupling.By modelling the droplet lattice as a memory-endowed system with spatially nonlocal coupling, we herein rationalise the form and onset of instability in this new class of dynamical oscillator. We i…
Pressure controlled displacement of an oil/water interface is studied in dense packings of functionalized glass beads with well-defined spatial wettability correlations. An enhanced dissipation is observed if the typical extension $ξ$ of the same-type wetting domains is smaller than the average bead diameter $d$. Three dimensional imaging using X-ray microtomography shows that the frequency $n(s)$ of residual droplet volumes $s$ for different $ξ$ collapse onto the same curve. This indicates that the additional dissipation for small $ξ$ is due to contact line pinning rather than an increase of …
Initially, the acoustic field forced the droplets into an oblate spheroid shape, though the counteracting force of the cooling stream caused them to circularize. Droplet geometry was thus the net result of streaming forces and surface tension at the acoustic boundary layer/air-liquid interface. Nucleation was determined to be neither homogeneous nor heterogeneous but secondary, and thus dependent on the cooling rate and not on the degree of supercooling. It was likely initiated by aerosolized ice particles from the air or from droplets that had already nucleated and broken up. The latter secon…
The migration of liquids in porous media, such as sand, has been commonly considered at high saturation levels with liquid pathways at pore dimensions. In this letter we reveal a low saturation regime observed in our experiments with droplets of extremely low volatility liquids deposited on sand. In this regime the liquid is mostly found within the grain surface roughness and in the capillary bridges formed at the contacts between the grains. The bridges act as variable-volume reservoirs and the flow is driven by the capillary pressure arising at the wetting front according to the roughness le…
Micro-swimmers can serve as cargo carriers that move deep inside complex flow networks. When a school collectively entrains the surrounding fluid, their transport capacity can be enhanced. This effect is quantified with good agreement between experiments with self-propelled droplets and a confined Brinkman squirmer model. The volume of liquid entrained can be much larger than the droplet itself, amplifying the effective cargo capacity over an order of magnitude, even for dilute schools. Hence, biological and engineered swimmers can efficiently transport materials into confined environments.
For improved operating conditions of a polymer electrolyte membrane (PEM) fuel cell, a sophisticated water management is crucial. Therefore, it is necessary to understand the transport mechanisms of water throughout the cell constituents especially on the cathode side, where the excess water has to be removed. Pore-scale modeling of diffusion layers and gas distributor has been established as a favorable technique to investigate the ongoing processes. Investigating the interface between the cathode layers, a particular challenge is the combination and interaction of the multi-phase flow in the…
Active colloidal rafts perform swimming strokes that propel their host droplets
Université de Bordeaux（波尔多大学）；Collège de France（法兰西公学院）；Max Planck Institute for the Physics of Complex Systems（马克斯·普朗克复杂系统物理研究所）；Meiji University（明治大学）
The anomalous dynamics of capillary rise in a porous medium discovered experimentally more than a decade ago (Delker et al., Phys. Rev. Lett. 76 (1996) 2902) is described. The developed theory is based on considering the principal modes of motion of the menisci that collectively form the wetting front on the Darcy scale. These modes, which include (i) dynamic wetting mode, (ii) threshold mode and (iii) interface de-pinning process, are incorporated into the boundary conditions for the bulk equations formulated in the regular framework of continuum mechanics of porous media, thus allowing one t…
We present a lattice-gas (generalised Ising) model for liquid droplets on solid surfaces. The time evolution in the model involves two processes: (i) Single-particle moves which are determined by a kinetic Monte Carlo algorithm. These incorporate into the model particle diffusion over the surface and within the droplets and also evaporation and condensation, i.e. the exchange of particles between droplets and the surrounding vapour. (ii) Larger-scale collective moves, modelling advective hydrodynamic fluid motion, determined by considering the dynamics predicted by a thin-film equation. The mo…
This study addresses the issue of oil removal from water using hydrophilic porous membranes. The effective separation of oil-in-water dispersions involves high flux of water through the membrane and, at the same time, high rejection rate of the oil phase. The effects of transmembrane pressure and crossflow velocity on rejection of oil droplets and thin oil films by pores of different cross-section are investigated numerically by solving the Navier-Stokes equation. We found that in the absence of crossflow, the critical transmembrane pressure, which is required for the oil droplet entry into a …
We present a study of the spreading of liquid droplets on a solid substrate at very small scales. We focus on the regime where effective wetting energy (binding potential) and surface tension effects significantly influence steady and spreading droplets. In particular, we focus on strong packing and layering effects in the liquid near the substrate due to underlying density oscillations in the fluid caused by attractive substrate-liquid interactions. We show that such phenomena can be described by a thin-film (or long-wave or lubrication) model including an oscillatory Derjaguin (or disjoining…
In this study, the flow field around face masks was visualized and evaluated using computational fluid dynamics. The protective efficiency of face masks suppressing droplet infection owing to differences in the shape, medium, and doubling usage is predicted. Under the ongoing COVID-19 pandemic condition, many studies have been conducted to highlight that airborne transmission is the main transmission route. However, the virus infection prevention effect of face masks has not been sufficiently discussed, and thus remains as a controversial issue. Therefore, we aimed to provide a beneficial inde…
A millimetric bouncing droplet sustained on a vibrating bath becomes a moving wave source (particle) through periodically interacting with the local wave field it generates during the droplet-bath impact. By virtue of such particle-wave duality, the macroscopic hydrodynamic system imitates enigmatic behaviors of the quantum realm. Here we show that it is possible to create an integrated pilot-wave field to better prescribe the droplet trajectories, via amplified bath capillarity. This is demonstrated with a liquid metal droplet-bath system in which the local wave field generated by droplet bou…
Flood front is the jump interface where fluids distribute discontinuously, whose interface condition is the theoretical basis of a mathematical model of the multiphase flow in porous medium. The conventional interface condition at the jump interface is expressed as the continuous Darcy velocity and fluid pressure (named CPVCM). This paper has inspected it via the studying the water-oil displacement in one dimensional reservoir with considering capillary pressure but ignoring the compressibility and gravity. It is proved theoretically that the total Darcy velocity and total pressure (defined by…
