plunging破碎波——第一部分:一组波剖面的分析
Plunging Breakers - Part 1. Analysis of an Ensemble of Wave Profiles
AI总结:
本文通过高精度造波和激光诱导荧光测量,对三个 plunging 破碎波的重复剖面进行时空对齐与统计分析,揭示破碎过程中层流到湍流转变的高度可重复性及关键飞溅和气穴特征。
摘要:
本文(分两部分)对三个机械生成的 plunging 破碎波的动力学和液滴产生进行了实验研究。在本部分(第一部分)中,通过对每个波在 10 次重复破碎事件中自由表面剖面演化的测量,研究了三个破碎波的动力学。这些波由色散聚焦波包生成,波包由高精度可编程造波机产生。生成三个破碎波的造波机运动主要仅在整体幅度上有微小差异。破碎波剖面采用电影式激光诱导荧光技术测量,覆盖约一个破碎波波长的流向区域,时间跨度为 2.6 个破碎波周期。10 组重复的破碎波剖面在空间和时间上与射流冲击的位置和时刻对齐。对齐后的剖面数据用于生成系综平均表面高度以及局部法向距离和局部弧长相对于瞬时平均剖面的标准差的时空图。研究发现,平均值和标准差图包含强相关的局部化特征,并表明从层流到湍流的转变是一个高度可重复的过程。高标准差区域包括 plunging 射流冲击产生的飞溅以及随后在破碎区前部的飞溅冲击,还包括在射流尖端冲击瞬间被卷入 plunging 射流下方的气穴上升到表面并在波背面破裂的位置。在第二部分中,这些特征被用来解释液滴数量、直径和速度分布的各种特征。
英文摘要:
An experimental study of the dynamics and droplet production in three mechanically generated plunging breaking waves is presented in this two-part paper. In the present paper (Part 1), the dynamics of the three breakers are studied through measurements of the evolution of their free surface profiles during 10 repeated breaking events for each wave. The waves are created from dispersively focused wave packets which are generated by a highly accurate programmable wave maker. The wave maker motions that create the three breakers differ primarily only by small changes in their overall amplitude. Breaker profiles are measured with a cinematic laser induced fluorescence technique covering a streamwise region of approximately one breaker wavelength and over a time of 2.6 breaker periods. The 10 repeated sets of breaker profiles are spatially and temporally aligned to the location and time of jet impact. The aligned profile data is used to create spatio-temporal maps of the ensemble average surface height and the standard deviation of both the local normal distance and the local arc length relative to the instantaneous mean profile. It is found that the mean and standard deviation maps contain strongly correlated localized features and indicate that the transition from laminar to turbulent flow is a highly repeatable process. Regions of high standard deviation include the splash created by the plunging jet impact and subsequent splash impacts at the front of the breaking region as well as the site where the air pocket entrained under the plunging jet at the moment of jet tip impact comes to the surface and pops on the back face of the wave. In Part 2, these features are used to interpret various features of the distributions of droplet number, diameter and velocity.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。