Terahertz (THz) communication signals are susceptible to severe degradation because of the molecular interaction with the atmosphere in the form of subsequent absorption and re-radiation. Recently, reconfigurable intelligent surface (RIS) has emerged as a potential technology to assist in THz communications by boosting signal power or providing virtual line-of-sight paths. However, the re-radiated energy has either been modeled as a non-line-of-sight scattering component or as additive Gaussian noise in the literature. Since the precise characterization is still a work in progress, this paper presents the first comparative investigation of the performance of an RIS-aided THz system under these two extreme re-radiation models. In particular, we first develop a novel parametric channel model that encompasses both models of the re-radiation through a simple parameter change, and then utilize that to design a robust block-coordinate descent (BCD) algorithmic framework which maximizes a lower bound on channel capacity considering imperfect channel state information. In this framework, the original problem is split into two sub-problems: a) receive beamformer optimization, and b) RIS phase-shift optimization. We also analytically demonstrate the limited interference suppression capability of a passive RIS. Our numerical results also demonstrate that slightly better throughput is achieved when the re-radiation manifests as scattering.
The operation of Terahertz (THz) communication can be significantly impacted by the interaction between the transmitted wave and the molecules in the atmosphere. In particular, it has been observed experimentally that the signal undergoes not only molecular absorption, but also molecular re-radiation. Two extreme modeling assumptions are prevalent in the literature, where the re-radiated energy is modeled in the first as additive Gaussian noise and in the second as a scattered component strongly correlated to the actual signal. Since the exact characterization is still an open problem, we prov…
Reconfigurable intelligent surface (RIS) can assist terahertz wireless communication to restore the fragile line-of-sight links and facilitate beam steering. Arbitrary reflection beam patterns are desired to meet diverse requirements in different applications. This paper establishes relationship between RIS beam pattern design with two-dimensional finite impulse response filter design and proposes a fast non-iterative algorithm to solve the problem. Simulations show that the proposed method outperforms baseline method. Hence, it represents a promising solution for fast and arbitrary beam patte…
This paper proposes a new simultaneous terahertz (THz) information and power transfer (STIPT) system, which is assisted by reconfigurable intelligent surface (RIS) for both the information data and power transmission. We aim to maximize the information users' (IUs') data rate while guaranteeing the energy users' (EUs') and RIS's power harvesting requirements. To solve the formulated non-convex problem, the block coordinate descent (BCD) based algorithm is adopted to alternately optimize the transmit precoding of IUs, RIS's reflecting coefficients, and RIS's coordinate. The Penalty Constrained …
Reconfigurable Intelligent Surface (RIS) has become a popular technology to improve the capability of a THz multiuser Multi-input multi-output (MIMO) communication system. THz wave characteristics, on the other hand, restrict THz beam coverage on RIS when using a uniform planar array (UPA) antenna. In this study, we propose a dynamic RIS subarray structure to improve the performance of a THz MIMO communication system. In more details, an RIS is divided into several RIS subarrays according to the number of users. Each RIS subarray is paired with a user and only reflects beams to the correspondi…
The low hardware cost makes ultra-large (XL) reconfigurable intelligent surface (RIS) an attractive solution for the performance enhancement of localization and communication systems, but it results in near-field propagation channels, especially for the high-frequency communication systems, e.g. mmWave and sub-terahertz (subTHz) systems. This makes localization and channel estimation in the near field of the RIS-aided subTHz system more challenging. In this paper, we consider the spherical wavefront propagation in the near field of the subTHz system with the assistance of a RIS. A near-field c…
Terahertz (THz) systems have the benefit of high bandwidth and hence are capable of supporting ultra-high data rates, albeit at the cost of high pathloss. Hence they tend to harness high-gain beamforming. Therefore a novel hybrid 3D beamformer relying on sophisticated sensor-based beam training and channel estimation is proposed for Reconfigurable Intelligent Surface (RIS) aided THz MIMO systems. A so-called array-of-subarray based THz BS architecture is adopted and the corresponding sub-RIS structure is proposed. The BS, RIS and receiver antenna arrays of the users are all uniform planar arra…
The quality of experience (QoE) requirements of wireless Virtual Reality (VR) can only be satisfied with high data rate, high reliability, and low VR interaction latency. This high data rate over short transmission distances may be achieved via abundant bandwidth in the terahertz (THz) band. However, THz waves suffer from severe signal attenuation, which may be compensated by the reconfigurable intelligent surface (RIS) technology with programmable reflecting elements. Meanwhile, the low VR interaction latency may be achieved with the mobile edge computing (MEC) network architecture due to its…
With the fifth-generation (5G) networks widely commercialized and fast deployed, the sixth-generation (6G) wireless communication is envisioned to provide competitive quality of service (QoS) in multiple aspects to global users. The critical and underlying research of the 6G is, firstly, highly dependent on the precise modeling and characterization of the wireless propagation when the spectrum is believed to expand to the terahertz (THz) domain. Moreover, future networks' power consumption and energy efficiency are critical factors to consider. In this research, based on a review of the fundam…
The terahertz (THz) frequency band has recently attracted considerable attention in wireless communications as potential candidate for providing the necessary high bandwidth for demanding applications. With increasing frequency, however, the communication link becomes more vulnerable to blockage and pathloss increases. While both effects can be mitigated with the judicious utilization of directional beams and Reconfigurable Intelligent Surfaces (RISs), high directivity could potentially increase the probability of undesired misalignment between the beam that is steered by the RIS, and the user…
Wireless networks operating at terahertz (THz) frequencies have been proposed as a promising candidate to support the ever-increasing capacity demand, which cannot be satisfied with existing radio-frequency (RF) technology. On the other hand, it likely will serve as backbone infrastructure and could therefore be an attractive target for eavesdropping attacks. Compared with regular RF spectrum, wireless channels in the THz range could be less vulnerable to interceptions because of their high beam directionality and small signal coverage. However, a risk for eavesdropping can still exist due to …
Wireless communication in the TeraHertz band (0.1--10 THz) is envisioned as one of the key enabling technologies for the future six generation (6G) wireless communication systems. However, very high propagation attenuations and molecular absorptions of THz frequencies often limit the signal transmission distance and coverage range. Benefited from the recent breakthrough on the reconfigurable intelligent surfaces (RIS) for realizing smart radio propagation environment, we propose a novel hybrid beamforming scheme for the multi-hop RIS-assisted communication networks to improve the coverage rang…
We propose a holographic version of a reconfigurable intelligent surface (RIS) and investigate its application to terahertz (THz) massive multiple-input multiple-output systems. Capitalizing on the miniaturization of THz electronic components, RISs can be implemented by densely packing sub-wavelength unit cells, so as to realize continuous or quasi-continuous apertures and to enable holographic communications. In this paper, in particular, we derive the beam pattern of a holographic RIS. Our analysis reveals that the beam pattern of an ideal holographic RIS can be well approximated by that of …
In this paper, the problem of associating reconfigurable intelligent surfaces (RISs) to virtual reality (VR) users is studied for a wireless VR network. In particular, this problem is considered within a cellular network that employs terahertz (THz) operated RISs acting as base stations. To provide a seamless VR experience, high data rates and reliable low latency need to be continuously guaranteed. To address these challenges, a novel risk-based framework based on the entropic value-at-risk is proposed for rate optimization and reliability performance. Furthermore, a Lyapunov optimization tec…
This paper presents an analytical pathloss model for reconfigurable intelligent surface (RIS) assisted terahertz (THz) wireless systems. Specifically, the model accommodates both the THz link and the RIS particularities. Finally, we derive a closed-form expression that returns the optimal phase shifting of each RIS reflection unit. The derived pathloss model is validated through extensive electromagnetic simulations and is expected to play a key role in the design of RIS-assisted THz wireless systems.
Terahertz (THz) systems are capable of supporting ultra-high data rates thanks to large bandwidth, and the potential to harness high-gain beamforming to combat high pathloss. In this paper, a novel quantum sensing (Ghost Imaging (GI)) based beam training is proposed for Simultaneously Transmitting and Reflecting Reconfigurable Intelligent Surface (STAR RIS) aided THz multi-user massive MIMO systems. We first conduct GI by surrounding 5G downlink signals to obtain 3D images of the environment including users and obstacles. Based on the information, we calculate the optimal position of the UAV-m…
Zhejiang University（浙江大学）；ZJU-UIUC Institute, Zhejiang University（浙江大学ZJU-UIUC联合学院）；National and Kapodistrian University of Athens（雅典国立卡波迪斯特里安大学）；University of Electronic Science and Technology of China（电子科技大学）；Singapore University of Technology and Design（新加坡科技设计大学）；CentraleSupélec（巴黎中央理工-高等电力学院）；University Paris-Saclay（巴黎萨克雷大学）
Wireless communication in the TeraHertz band (0.1--10 THz) is envisioned as one of the key enabling technologies for the future sixth generation (6G) wireless communication systems scaled up beyond massive multiple input multiple output (Massive-MIMO) technology. However, very high propagation attenuations and molecular absorptions of THz frequencies often limit the signal transmission distance and coverage range. Benefited from the recent breakthrough on the reconfigurable intelligent surfaces (RIS) for realizing smart radio propagation environment, we propose a novel hybrid beamforming schem…
In the recent years, the proliferation of wireless data traffic has led the scientific community to explore the use of higher unallocated frequency bands, such as the millimeter wave and terahertz (0.1-10 THz) bands. However, they are prone to blockages from obstacles laid in the transceiver path. To address this, in this work, the use of a reconfigurable-intelligent-surface (RIS) to restore the link between a transmitter (TX) and a receiver (RX), operating in the D-band (110-170 GHz) is investigated. The system performance is evaluated in terms of pathgain and capacity considering the RIS des…
The Terahertz band is envisioned to meet the demanding 100 Gbps data rates for 6G wireless communications. Aiming at combating the distance limitation problem with low hardware-cost, ultra-massive MIMO with hybrid beamforming is promising. However, relationships among wavelength, array size and antenna spacing give rise to the inaccuracy of planar-wave channel model (PWM), while an enlarged channel matrix dimension leads to excessive parameters of applying spherical-wave channel model (SWM). Moreover, due to the adoption of hybrid beamforming, channel estimation (CE) needs to recover high-dime…
Terahertz (THz) communications and reconfigurable intelligent surfaces (RISs) have been recently proposed to enable various powerful indoor applications, such as wireless virtual reality (VR). For an efficient servicing of VR users, an efficient THz path allocation solution becomes a necessity. Assuming the RIS component is the most critical one in enabling the service, we investigate the impact of RIS hardware failure on path allocation performance. To this end, we study a THz network that employs THz operated RISs acting as base stations, serving VR users. We propose a Semi-Markov decision P…
In this paper, we introduce a theoretical framework for analyzing the performance of multi-reconfigurable intelligence surface (RIS) empowered terahertz (THz) wireless systems subject to turbulence and stochastic beam misalignment. In more detail, we extract a closed-form expression for the outage probability that quantifies the joint impact of turbulence and misalignment as well as the effect of transceivers' hardware imperfections. Our results highlight the importance of accurately modeling both turbulence and misalignment when assessing the performance of multi-RIS-empowered THz wireless sy…
Existing research works on reconfigurable intelligent surfaces (RIS) based terahertz (THz) system ignores the effect of phase noise and employ the zero-boresight pointing errors model of the free-space optics channel in performance analysis. In this paper, we analyze the performance of RIS-THz transmission under the combined effect of channel fading, THz pointing error (TPE), and statistical phase noise due to imperfect phase compensation at each RIS element. First, we derive statistical results of the double $α$-$μ$ fading combined with the TPE and phase noise at individual RIS elements using…
We consider reconfigurable intelligent surface (RIS) aided sixth-generation (6G) terahertz (THz) communications for indoor environment in which a base station (BS) wishes to send independent messages to its serving users with the help of multiple RISs. For indoor environment, various obstacles such as pillars, walls, and other objects can result in no line-of-sight signal path between the BS and a user, which can significantly degrade performance. To overcome such limitation of indoor THz communication, we firstly optimize the placement of RISs to maximize the coverage area. Under the optimize…
The non-terrestrial networks (NTNs) are recognized as a key component to provide cost-effective and high-capacity ubiquitous connectivity in the future wireless communications. In this paper, we investigate the secure transmission in a terahertz (THz)-empowered reconfigurable intelligent surface (RIS)-assisted NTN (T-RANTN), which is composed of a low-Earth orbit satellite transmitter, an RIS-installed high-altitude platform (HAP) and two unmanned aerial vehicle (UAV) receivers, only one of which is trustworthy. An approximate ergodic secrecy rate (ESR) expression is derived when the atmospher…
In wireless systems aided by reconfigurable intelligent surfaces (RISs), channel state information plays a pivotal role in achieving the performance gain of RISs. Mobility renders accurate channel estimation (CE) more challenging due to the Doppler effect. In this letter, we propose two practical wideband CE schemes incorporating Doppler shift adjustment (DSA) for multi-path and single-path propagation environments, respectively, for RIS-assisted communication with passive reflecting elements. For the multi-path scenario, ordinary CE is first executed assuming quasi-static channels, followed b…
Reconfigurable Intelligent Surfaces (RIS) have received significant attention recently as an innovation for enhanced connectivity, capacity, and energy efficiency in future wireless networks. Recent works indicate that such RIS-augmented communications can significantly enhance performance by intelligently shaping the characteristics of the multipath propagation environment to focus the energy in a desired direction and to circumvent impediments such as blockage, especially for communication at millimeter-wave (mmW), Terahertz (THz) and higher frequencies. In this paper, we investigate optimiz…
The revolution in the low Earth orbit (LEO) satellite networks will bring changes on their communication models and a shift from the classical bent-pipe architectures to more sophisticated networking platforms. Thanks to technological advancements in microelectronics and micro-systems, the terahertz (THz) band has emerged as a strong candidate for inter-satellite links (ISLs) due to its promise of high data rates. Yet, the propagation conditions of the THz band need to be properly modeled and controlled by utilizing reconfigurable intelligent surfaces (RISs) to leverage their full potential. I…
