CZTSSe光伏器件热处理、暗电偏压和光照的交替稳定方法
Alternate stabilization methods for CZTSSe photovoltaic devices by thermal treatment, dark electric bias and illumination
摘要:
可靠的测量程序对于光伏新兴薄膜技术的额定功率和产量预测至关重要。铜锌锡硫硒(CZTSSe)薄膜光伏器件是一种新兴的、由丰富的元素组成的光伏器件。尽管如此,在电功率测量之前的足够的稳定方法在国际标准化中缺失,而其他薄膜技术的现有标准对于CZTSSe不能正常工作。本研究探讨了实现CZTSSe太阳能器件功率稳定的方法。作为现有国际器件测试标准的替代方案,研究了三种互补的稳定性例程:快速退火,暗电偏置和照明下的不同工作点。用于功率稳定的稳定循环的典型数目为3至6个循环的快速退火、暗电偏压和照明,对于相应的方法,功率损失为-19.5%、-11.4%和-1.9%。暗电偏置方法被发现提供最可靠的平均结果的功率稳定。所有的稳定方法都被证明有潜力在稳定标准化功率测量的CZTSSe设备中充分发挥作用。
英文摘要:
Reliable measurement routines are crucial for power rating and yield prediction of photovoltaic emerging thinfilm technologies. Copper-Zinc-Tin-Sulfur-Selenium (CZTSSe) thin-film photovoltaic devices are an emerging technology made of abundant elements. Still, sufficient stabilization methods prior to electric power measurement are missing in the international standardization, while existing standards for other thin-film technologies do not work properly for CZTSSe. This study investigated methods for achieving power stabilization of the CZTSSe solar devices. Three complementary stabilization routines for the kesterite-based solar devices were investigated as an alternative to the existing international device testing standards: rapid annealing, dark electric biasing and different operating points under illumination. The typical number of stabilization cycles for power stabilization was between 3 and 6 cycles of rapid annealing, dark electric bias and illumination with a power loss of -19.5%, -11.4%, and -1.9%, for the respective methods. The dark electric bias method was found to provide the most reliable average result for power stabilization. All stabilization methods proved to have the potential to work sufficiently in stabilizing the CZTSSe devices for standardized power measurement.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。