3D Multi-object tracking (MOT) ensures consistency during continuous dynamic detection, conducive to subsequent motion planning and navigation tasks in autonomous driving. However, camera-based methods suffer in the case of occlusions and it can be challenging to accurately track the irregular motion of objects for LiDAR-based methods. Some fusion methods work well but do not consider the untrustworthy issue of appearance features under occlusion. At the same time, the false detection problem also significantly affects tracking. As such, we propose a novel camera-LiDAR fusion 3D MOT framework based on the Combined Appearance-Motion Optimization (CAMO-MOT), which uses both camera and LiDAR data and significantly reduces tracking failures caused by occlusion and false detection. For occlusion problems, we are the first to propose an occlusion head to select the best object appearance features multiple times effectively, reducing the influence of occlusions. To decrease the impact of false detection in tracking, we design a motion cost matrix based on confidence scores which improve the positioning and object prediction accuracy in 3D space. As existing multi-object tracking methods only consider a single category, we also propose to build a multi-category loss to implement multi-object tracking in multi-category scenes. A series of validation experiments are conducted on the KITTI and nuScenes tracking benchmarks. Our proposed method achieves state-of-the-art performance and the lowest identity switches (IDS) value (23 for Car and 137 for Pedestrian) among all multi-modal MOT methods on the KITTI test dataset. And our proposed method achieves state-of-the-art performance among all algorithms on the nuScenes test dataset with 75.3% AMOTA.
In the recent literature, on the one hand, many 3D multi-object tracking (MOT) works have focused on tracking accuracy and neglected computation speed, commonly by designing rather complex cost functions and feature extractors. On the other hand, some methods have focused too much on computation speed at the expense of tracking accuracy. In view of these issues, this paper proposes a robust and fast camera-LiDAR fusion-based MOT method that achieves a good trade-off between accuracy and speed. Relying on the characteristics of camera and LiDAR sensors, an effective deep association mechanism i…
The objective of this paper is to design a computational architecture that discovers camouflaged objects in videos, specifically by exploiting motion information to perform object segmentation. We make the following three contributions: (i) We propose a novel architecture that consists of two essential components for breaking camouflage, namely, a differentiable registration module to align consecutive frames based on the background, which effectively emphasises the object boundary in the difference image, and a motion segmentation module with memory that discovers the moving objects, while ma…
Most existing perception systems rely on sensory data acquired from cameras, which perform poorly in low light and adverse weather conditions. To resolve this limitation, we have witnessed advanced LiDAR sensors become popular in perception tasks in autonomous driving applications. Nevertheless, their usage in traffic monitoring systems is less ubiquitous. We identify two significant obstacles in cost-effectively and efficiently developing such a LiDAR-based traffic monitoring system: (i) public LiDAR datasets are insufficient for supporting perception tasks in infrastructure systems, and (ii)…
CAMotion: A High-Quality Benchmark for Camouflaged Moving Object Detection in the Wild
School of CyberScience and Technology, Sun Yat-sen University（中山大学网络空间安全学院）；College of Computing and Data Science, Nanyang Technological University（南洋理工大学计算与数据科学学院）；School of Computer Science (National Pilot Software Engineering School), Beijing University of Posts and Telecommunications（北京邮电大学计算机学院（国家示范性软件学院））
Explicit Motion Handling and Interactive Prompting for Video Camouflaged Object Detection
National Key Laboratory of Fundamental Science on Synthetic Vision, Sichuan University（合成视觉基础科学国家重点实验室，四川大学）；College of Computer Science（计算机学院）；School of Computing（计算学院）；Australian National University（澳大利亚国立大学）
Monash University（莫纳什大学）；Mohamed bin Zayed University of Artificial Intelligence（穆罕默德·本·扎耶德人工智能大学）；ETH Zurich（苏黎世联邦理工学院）；SenseTime Research（商汤科技研究院）；Shanghai AI Laboratory（上海人工智能实验室）；Data61, CSIRO（联邦科学与工业研究组织Data61）；Airdoc Research Australia（澳大利亚鹰瞳研究院）
We propose a new video camouflaged object detection (VCOD) framework that can exploit both short-term dynamics and long-term temporal consistency to detect camouflaged objects from video frames. An essential property of camouflaged objects is that they usually exhibit patterns similar to the background and thus make them hard to identify from still images. Therefore, effectively handling temporal dynamics in videos becomes the key for the VCOD task as the camouflaged objects will be noticeable when they move. However, current VCOD methods often leverage homography or optical flows to represent…
CamoSAM2: SAM2-oriented Prompt Auto-Refinement for Video Camouflaged Object Detection
National Key Laboratory of Fundamental Science on Synthetic Vision, Sichuan University（合成视觉基础科学国家重点实验室，四川大学）；College of Computer Science, Sichuan University（计算机学院，四川大学）
Existing motion capture datasets are largely short-range and cannot yet fit the need of long-range applications. We propose LiDARHuman26M, a new human motion capture dataset captured by LiDAR at a much longer range to overcome this limitation. Our dataset also includes the ground truth human motions acquired by the IMU system and the synchronous RGB images. We further present a strong baseline method, LiDARCap, for LiDAR point cloud human motion capture. Specifically, we first utilize PointNet++ to encode features of points and then employ the inverse kinematics solver and SMPL optimizer to re…
This work proposes a novel motion guided method for target-less self-calibration of a LiDAR and camera and use the re-projection of LiDAR points onto the image reference frame for real-time depth upsampling. The calibration parameters are estimated by optimizing an objective function that penalizes distances between 2D and re-projected 3D motion vectors obtained from time-synchronized image and point cloud sequences. For upsampling, a simple, yet effective and time efficient formulation that minimizes depth gradients subject to an equality constraint involving the LiDAR measurements is propose…
University of Massachusetts, Amherst（马萨诸塞大学阿默斯特分校）
The human ability to detect and segment moving objects works in the presence of multiple objects, complex background geometry, motion of the observer, and even camouflage. In addition to all of this, the ability to detect motion is nearly instantaneous. While there has been much recent progress in motion segmentation, it still appears we are far from human capabilities. In this work, we derive from first principles a new likelihood function for assessing the probability of an optical flow vector given the 3D motion direction of an object. This likelihood uses a novel combination of the angle a…
Towards Accurate Camouflaged Object Detection with Mixture Convolution and Interactive Fusion
National Engineering Laboratory for Integrated Aero-Space-Ground-Ocean Big Data Application Technology, School of Computer Science and Engineering, Northwestern Polytechnical University（西北工业大学计算机学院）；Center for Brain Imaging Science and Technology, Zhejiang University（浙江大学）；School of Computer Science, China University of Geosciences（中国地质大学计算机学院）；Optical Electrical and Computer Engineering, University of Shanghai for Science and Technology（上海理工大学）；School of Electrical Engineering & Information Department, Northeast Petroleum University（东北石油大学）；School of Electronic, Electrical Engineering and Physics, Fujian University of Technology（福建工程学院）
Beijing Jiaotong University（北京交通大学）；National University of Defense Technology（国防科技大学）
Pseudo-LiDAR point cloud interpolation is a novel and challenging task in the field of autonomous driving, which aims to address the frequency mismatching problem between camera and LiDAR. Previous works represent the 3D spatial motion relationship induced by a coarse 2D optical flow, and the quality of interpolated point clouds only depends on the supervision of depth maps. As a result, the generated point clouds suffer from inferior global distributions and local appearances. To solve the above problems, we propose a Pseudo-LiDAR point cloud interpolation network to generates temporally and …
Most scanning LiDAR sensors generate a sequence of point clouds in real-time. While conventional 3D object detectors use a set of unordered LiDAR points acquired over a fixed time interval, recent studies have revealed that substantial performance improvement can be achieved by exploiting the spatio-temporal context present in a sequence of LiDAR point sets. In this paper, we propose a novel 3D object detection architecture, which can encode LiDAR point cloud sequences acquired by multiple successive scans. The encoding process of the point cloud sequence is performed on two different time sca…
Bézier Degradation Modeling for LiDAR-based Human Motion Capture
PCA Lab, School of Computer Science and Engineering, Nanjing University of Science and Technology（计算机科学与工程学院精密仪器实验室，南京理工大学）；PCA Lab, School of Intelligence Science and Technology, Nanjing University（智能科学与技术学院精密仪器实验室，南京大学）
This paper presents a novel indoor layout estimation system based on the fusion of 2D LiDAR and intensity camera data. A ground robot explores an indoor space with a single floor and vertical walls, and collects a sequence of intensity images and 2D LiDAR datasets. The LiDAR provides accurate depth information, while the camera captures high-resolution data for semantic interpretation. The alignment of sensor outputs and image segmentation are computed jointly by aligning LiDAR points, as samples of the room contour, to ground-wall boundaries in the images. The alignment problem is decoupled i…
ELMAR: Enhancing LiDAR Detection with 4D Radar Motion Awareness and Cross-modal Uncertainty
Infineon Technologies AG and the Technical University of Munich（英飞凌科技有限公司和技术大学慕尼黑）；China University of Geosciences（中国地质大学）；Technical University of Munich（技术大学慕尼黑）
ShanghaiTech University（上海科技大学）；Shanghai Engineering Research Center of Intelligent Vision and Imaging（上海智能视觉与成像工程技术研究中心）；The Chinese University of Hong Kong（香港中文大学）
Domain adaptation for Cross-LiDAR 3D detection is challenging due to the large gap on the raw data representation with disparate point densities and point arrangements. By exploring domain-invariant 3D geometric characteristics and motion patterns, we present an unsupervised domain adaptation method that overcomes above difficulties. First, we propose the Spatial Geometry Alignment module to extract similar 3D shape geometric features of the same object class to align two domains, while eliminating the effect of distinct point distributions. Second, we present Temporal Motion Alignment module …
It is a significant problem to predict the 2D LiDAR map at next moment for robotics navigation and path-planning. To tackle this problem, we resort to the motion flow between adjacent maps, as motion flow is a powerful tool to process and analyze the dynamic data, which is named optical flow in video processing. However, unlike video, which contains abundant visual features in each frame, a 2D LiDAR map lacks distinctive local features. To alleviate this challenge, we propose to estimate the motion flow based on deep neural networks inspired by its powerful representation learning ability in e…
ContrastMotion: Self-supervised Scene Motion Learning for Large-Scale LiDAR Point Clouds
Nanjing University of Aeronautics and Astronautics（南京航空航天大学）；Rhino（犀牛（公司））；The Chinese University of Hong Kong（香港中文大学）；OPPO Research Institute（OPPO研究院）；Zhejiang Lab（之江实验室）；ShanghaiTech University（上海科技大学）
Southern University of Science and Technology（南方科技大学）；Sifakis Research Institute of Trustworthy Autonomous Systems, Southern University of Science and Technology（南方科技大学西法基斯可信自主系统研究院）；Pazhou Lab（琶洲实验室）
Multi-object tracking (MOT) with camera-LiDAR fusion demands accurate results of object detection, affinity computation and data association in real time. This paper presents an efficient multi-modal MOT framework with online joint detection and tracking schemes and robust data association for autonomous driving applications. The novelty of this work includes: (1) development of an end-to-end deep neural network for joint object detection and correlation using 2D and 3D measurements; (2) development of a robust affinity computation module to compute occlusion-aware appearance and motion affini…
Shanghai Jiao Tong University（上海交通大学）；University of Cambridge（剑桥大学）
A novel 3D point cloud learning model for deep LiDAR odometry, named PWCLO-Net, using hierarchical embedding mask optimization is proposed in this paper. In this model, the Pyramid, Warping, and Cost volume (PWC) structure for the LiDAR odometry task is built to refine the estimated pose in a coarse-to-fine approach hierarchically. An attentive cost volume is built to associate two point clouds and obtain embedding motion patterns. Then, a novel trainable embedding mask is proposed to weigh the local motion patterns of all points to regress the overall pose and filter outlier points. The estim…
TU Berlin（柏林工业大学）；University of Massachusetts（马萨诸塞大学）；Inria（法国国家信息与自动化研究所）；École Normale Supérieure（巴黎高等师范学院）；CNRS（法国国家科学研究中心）；PSL Research University（巴黎文理研究大学）；Univ. Grenoble Alpes（格勒诺布尔阿尔卑斯大学）；Grenoble INP（格勒诺布尔理工学院）
Both a good understanding of geometrical concepts and a broad familiarity with objects lead to our excellent perception of moving objects. The human ability to detect and segment moving objects works in the presence of multiple objects, complex background geometry, motion of the observer and even camouflage. How humans perceive moving objects so reliably is a longstanding research question in computer vision and borrows findings from related areas such as psychology, cognitive science and physics. One approach to the problem is to teach a deep network to model all of these effects. This contra…
Institute of Industrial Science, The University of Tokyo（东京大学产业技术研究所）；Microsoft（微软）
In this paper, we propose a method of targetless and automatic Camera-LiDAR calibration. Our approach is an extension of hand-eye calibration framework to 2D-3D calibration. By using the sensor fusion odometry method, the scaled camera motions are calculated with high accuracy. In addition to this, we clarify the suitable motion for this calibration method. The proposed method only requires the three-dimensional point cloud and the camera image and does not need other information such as reflectance of LiDAR and to give initial extrinsic parameter. In the experiments, we demonstrate our method…
Telekooperation Lab, Technical University Darmstadt（达姆施塔特工业大学远程协作实验室）
In this work, we address the problem of unsupervised moving object segmentation (MOS) in 4D LiDAR data recorded from a stationary sensor, where no ground truth annotations are involved. Deep learning-based state-of-the-art methods for LiDAR MOS strongly depend on annotated ground truth data, which is expensive to obtain and scarce in existence. To close this gap in the stationary setting, we propose a novel 4D LiDAR representation based on multivariate time series that relaxes the problem of unsupervised MOS to a time series clustering problem. More specifically, we propose modeling the change…
New York University（纽约大学）；University of Chinese Academy of Sciences（中国科学院大学）；Alibaba Group（阿里巴巴集团）
LiDAR point clouds collected from a moving vehicle are functions of its trajectories, because the sensor motion needs to be compensated to avoid distortions. When autonomous vehicles are sending LiDAR point clouds to deep networks for perception and planning, could the motion compensation consequently become a wide-open backdoor in those networks, due to both the adversarial vulnerability of deep learning and GPS-based vehicle trajectory estimation that is susceptible to wireless spoofing? We demonstrate such possibilities for the first time: instead of directly attacking point cloud coordinat…
ShanghaiTech University（上海科技大学）；Shanghai Engineering Research Center of Intelligent Vision and Imaging（上海智能视觉与成像工程技术研究中心）
Depth estimation is usually ill-posed and ambiguous for monocular camera-based 3D multi-person pose estimation. Since LiDAR can capture accurate depth information in long-range scenes, it can benefit both the global localization of individuals and the 3D pose estimation by providing rich geometry features. Motivated by this, we propose a monocular camera and single LiDAR-based method for 3D multi-person pose estimation in large-scale scenes, which is easy to deploy and insensitive to light. Specifically, we design an effective fusion strategy to take advantage of multi-modal input data, includ…
Technical University of Munich（慕尼黑工业大学）；Tongji University（同济大学）
State-of-the-art lidar-based 3D object detection methods rely on supervised learning and large labeled datasets. However, annotating lidar data is resource-consuming, and depending only on supervised learning limits the applicability of trained models. Self-supervised training strategies can alleviate these issues by learning a general point cloud backbone model for downstream 3D vision tasks. Against this backdrop, we show the relationship between self-supervised multi-frame flow representations and single-frame 3D detection hypotheses. Our main contribution leverages learned flow and motion …
Moving object detection and segmentation is an essential task in the Autonomous Driving pipeline. Detecting and isolating static and moving components of a vehicle's surroundings are particularly crucial in path planning and localization tasks. This paper proposes a novel real-time architecture for motion segmentation of Light Detection and Ranging (LiDAR) data. We use three successive scans of LiDAR data in 2D Bird's Eye View (BEV) representation to perform pixel-wise classification as static or moving. Furthermore, we propose a novel data augmentation technique to reduce the significant clas…
Looming, traditionally defined as the relative expansion of objects in the observer's retina, is a fundamental visual cue for perception of threat and can be used to accomplish collision free navigation. The measurement of the looming cue is not only limited to vision, and can also be obtained from range sensors like LiDAR (Light Detection and Ranging). In this article we present two methods that process raw LiDAR data to estimate the looming cue. Using looming values we show how to obtain threat zones for collision avoidance tasks. The methods are general enough to be suitable for any six-deg…
