Variability in human response creates non-trivial challenges for modeling and control of human-automation systems. As autonomy becomes pervasive, methods that can accommodate human variability will become paramount, to ensure efficiency, safety, and high levels of performance. We propose an easily computable modeling framework which takes advantage of a metric to assess variability in individual human response in a dynamic task that subjects repeat over several trials. Our approach is based in a transformation of observed trajectories to a reproducing kernel Hilbert space, which captures variability in human response as a distribution embedded within the Hilbert space. We evaluate the similarity across responses via the maximum mean discrepancy, which measures the distance between distributions within the Hilbert space. We apply this metric to a difficult driving task designed to elucidate differences across subjects. We conducted a pilot study with 6 subjects in an advanced driving simulator, in which subjects were tasked with collision avoidance of an obstacle in the middle of the road, around a blind corner, in a nighttime scenario, while steering only with the non-dominant hand.
The paper considers autonomous rendezvous maneuver and proximity operations of two spacecraft in presence of obstacles. A strategy that combines guidance and control algorithms is analyzed. The proposed closed-loop system is able to guarantee a safe path in a real environment, as well as robustness with respect to external disturbances and dynamic obstacles. The guidance strategy exploits a suitably designed Artificial Potential Field (APF), while the controller relies on Sliding Mode Control (SMC), for both position and attitude tracking of the spacecraft. As for the position control, two dif…
Aircraft collision avoidance systems have long been a key factor in keeping our airspace safe. Over the past decade, the FAA has supported the development of a new family of collision avoidance systems called the Airborne Collision Avoidance System X (ACAS X), which model the collision avoidance problem as a Markov decision process (MDP). Variants of ACAS X have been created for both manned (ACAS Xa) and unmanned aircraft (ACAS Xu and ACAS sXu). The variants primarily differ in the types of collision avoidance maneuvers they issue. For example, ACAS Xa issues vertical collision avoidance advis…
Space Navigator: a Tool for the Optimization of Collision Avoidance Maneuvers
National Research University Higher School of Economics, Laboratory of Methods for Big Data Analysis（俄罗斯国家研究大学高等经济学院，大数据分析方法实验室）；Yandex School of Data Analysis（Yandex数据科学学院）；Phygitalism
An Autonomous Road Vehicle (ARV) can navigate various types of road networks using inputs such as throttle (acceleration), braking (deceleration), and steering (change of lateral direction). In most ARV driving scenarios that involve normal vehicle traffic and encounters with vulnerable road users (VRUs), ARVs are not required to take evasive action. This paper presents a novel Emergency Obstacle Avoidance Maneuver (EOAM) methodology for ARVs traveling at higher speeds and lower road surface friction, involving time-critical maneuver determination and control. The proposed EOAM Framework offer…
Safety Verification for Evasive Collision Avoidance in Autonomous Vehicles with Enhanced Resolutions
New York University（纽约大学）；North Carolina A&T State University（北卡罗来纳农工州立大学）；University of Notre Dame（圣母大学）；Qualcomm（高通公司）；Torc Robotics（托尔克机器人公司）；Glasgow Caledonian University（格拉斯哥卡里多尼亚大学）；American Axle & Manufacturing（美国车桥制造公司）；Gatik AI（加蒂克人工智能公司）
As passenger vehicle technologies have advanced, so have their capabilities to avoid obstacles, especially with developments in tires, suspensions, steering, as well as safety technologies like ABS, ESC, and more recently, ADAS systems. However, environments around passenger vehicles have also become more complex, and dangerous. There have previously been studies that outline driver tendencies and performance capabilities when attempting to avoid obstacles while driving passenger vehicles. Now that autonomous vehicles are being developed with obstacle avoidance capabilities, it is important to…
Biasing the Driving Style of an Artificial Race Driver for Online Time-Optimal Maneuver Planning
Department of Industrial Engineering, University of Trento（工业工程系，特伦托大学）；Department of Electrical and Information Engineering, Politecnico di Bari（电气与信息工程系，巴里理工学院）；Professorship of Autonomous Vehicle Systems, Technical University of Munich（自主车辆系统教授职位，慕尼黑技术大学）
Control barrier functions (CBFs) recently introduced a systematic way to guarantee the system's safety through set invariance. Together with a nominal control method, it establishes a safety-critical control mechanism. The resulting safety constraints can be enforced as hard constraints in quadratic programming (QP) optimization, which rectifies the nominal control law based on the set of safe inputs. In this work, we introduce a multiple CBFs scheme which enforces several safety constraints with high relative degrees. This control structure is essential in many challenging robotic application…
This article considers collision avoidance (COLAV) for both static and moving obstacles using the branching-course model predictive control (BC-MPC) algorithm, which is designed for use by autonomous surface vehicles (ASVs). The BC-MPC algorithm originally only considered COLAV of moving obstacles, so in order to make the algorithm also be able to avoid static obstacles, we introduce an extra term in the objective function based on an occupancy grid. In addition, other improvements are made to the algorithm resulting in trajectories with less wobbling. The modified algorithm is verified throug…
Decision making for self-driving cars is usually tackled by manually encoding rules from drivers' behaviors or imitating drivers' manipulation using supervised learning techniques. Both of them rely on mass driving data to cover all possible driving scenarios. This paper presents a hierarchical reinforcement learning method for decision making of self-driving cars, which does not depend on a large amount of labeled driving data. This method comprehensively considers both high-level maneuver selection and low-level motion control in both lateral and longitudinal directions. We firstly decompose…
In recent years, automotive technology has made a steady progress. In particular, Advanced Driver Assistance System (ADAS) has enabled many safety features in commercial vehicles, for instance, pedestrian detection, lane keeping assist, emergency automatic braking, etc. Although these features provide drivers with a safer operational environment, crashes still happen occasionally due to the complex road conditions and the unpredictable movement of road users including vehicles, pedestrians, bicyclists, and non-motorized vehicles. In this paper, we aim at predicting the possibilities of crashes…
This paper issues an integrated control system of self-driving autonomous vehicles based on the personal driving preference to provide personalized comfortable driving experience to autonomous vehicle users. We propose an Occupant's Preference Metric (OPM) which is defining a preferred lateral and longitudinal acceleration region with maximum allowable jerk for users. Moreover, we propose a vehicle controller based on control parameters enabling integrated lateral and longitudinal control via preference-aware maneuvering of autonomous vehicles. The proposed system not only provides the criteri…
Formation control with the flocking approach is an efficient method that can reach the formation without determining the agent's position. This paper focuses on reaching the circular formation around the leader or target with a specific geometric pattern for the second-order multi-agent system. This means that the polygon formation is formed with arbitrary initial conditions. To create the circular formation, two potential function terms have been used for agent-agent and leader-agent interaction. In our approach, if some faults occur during the circular formation and some agents fail, the reg…
University of Michigan（密歇根大学）；Toyota Research Institute（丰田研究所）
Automatic emergency steering maneuvers can be used to avoid more obstacles than emergency braking alone. While a steer-by-wire system can decouple the driver who might act as a disturbance during the emergency steering maneuver, the alternative in which the steering wheel remains coupled can enable the driver to cover for automation faults and conform to regulations that require the driver to retain control authority. In this paper we present results from a driving simulator study with 48 participants in which we tested the performance of three emergency steering intervention schemes. In the f…
Airborne wind energy (AWE) systems are tethered flying devices that harvest wind resources at higher altitudes which are not accessible to conventional wind turbines. In order to become a viable alternative to other renewable energy technologies, AWE systems are required to fly reliably for long periods of time without manual intervention while being exposed to varying wind conditions. In the present work a methodology is presented, which augments an existing baseline controller with a prediction and prevention methodology to improve the resilience of the controller against these external dist…
This article presents a new algorithm for short-term maritime collision avoidance (COLAV) named the branching-course MPC (BC-MPC) algorithm. The algorithm is designed to be robust with respect to noise on obstacle estimates, which is a significant source of disturbance when using exteroceptive sensors such as e.g. radars for obstacle detection and tracking. Exteroceptive sensors do not require vessel-to-vessel communication, which enables COLAV toward vessels not equipped with e.g. automatic identification system (AIS) transponders, in addition to increasing the robustness with respect to faul…
This paper proposes a framework for 3D obstacle avoidance in the presence of partial observability of environment obstacles. The method focuses on the utility of the Artificial Potential Function (APF) controller in a practical setting where noisy and incomplete information about the proximity is inevitable. We propose a Particle Filter (PF) approach to estimate potential obstacle locations in an input depth image stream. The probable candidates are then used to generate an action that maneuvers the robot towards the negative gradient of potential at each time instant. Rigorous experimental va…
Hybrid Feedback Control for Global Navigation with Locally Optimal Obstacle Avoidance in n-Dimensional Spaces
Department of Electrical Engineering, Lakehead University（电气工程系，拉科夫大学）；Department of Computer Science and Engineering, University of Quebec in Outaouais（计算机科学与工程系，魁北克大学瓦省分校）
Kiel University（基尔大学）；AVL Software and Functions GmbH（AVL软件与功能有限公司）
A path-following collision-avoidance model predictive control (MPC) method is proposed which approximates obstacle shapes as convex polygons. Collision-avoidance is ensured by means of the signed distance function which is calculated efficiently as part of the MPC problem by making use of a dual formulation. The overall MPC problem can be solved by standard nonlinear programming (NLP) solvers. The dual signed distance formulation yields, besides the (dual) collision-avoidance constraints, norm, and consistency constraints. A novel approach is presented that combines the arising norm equality w…
National Institute of Information and Communications Technology (NICT)（日本信息通信研究机构）
Driver reaction is of vital importance in risk scenarios. Drivers can take correct evasive maneuver at proper cushion time to avoid the potential traffic crashes, but this reaction process is highly experience-dependent and requires various levels of driving skills. To improve driving safety and avoid the traffic accidents, it is necessary to provide all road drivers with on-board driving assistance. This study explores the plausibility of case-based reasoning (CBR) as the inference paradigm underlying the choice of personalized crash evasive maneuvers and the cushion time, by leveraging the w…
Stream Function-Based Navigation for Complex Quadcopter Obstacle Avoidance
GIPSA-lab, Université Grenoble Alpes - CNRS（格拉诺布尔大学实验室，格拉诺布尔大学-国家科学研究中心）；Department of Mechanical Engineering, Dalhousie University（达勒豪西大学机械工程系）；Advanced Control and Mechatronics Laboratory, Department of Mechanical Engineering, Dalhousie University（达勒豪西大学先进控制与机电实验室，机械工程系）
Tsinghua University（清华大学）；Beijing National Research Center for Information Science and Technology（北京信息科学与技术国家研究中心）
Multi-agent formation as well as obstacle avoidance is one of the most actively studied topics in the field of multi-agent systems. Although some classic controllers like model predictive control (MPC) and fuzzy control achieve a certain measure of success, most of them require precise global information which is not accessible in harsh environments. On the other hand, some reinforcement learning (RL) based approaches adopt the leader-follower structure to organize different agents' behaviors, which sacrifices the collaboration between agents thus suffering from bottlenecks in maneuverability …
Institute of Industrial Science, The University of Tokyo（东京大学工业科学研究所）；Hino Motors, Ltd.（日野汽车公司）
Lane change is a very demanding driving task and number of traffic accidents are induced by mistaken maneuvers. An automated lane change system has the potential to reduce driver workload and to improve driving safety. One challenge is how to improve driver acceptance on the automated system. From the viewpoint of human factors, an automated system with different styles would improve user acceptance as the drivers can adapt the style to different driving situations. This paper proposes a method to design different lane change styles in automated driving by analysis and modeling of truck driver…
University of California, Berkeley（加州大学伯克利分校）；Chalmers University of Technology（查尔姆斯理工大学）；Zenuity AB
We investigate the problem of predicting driver behavior in parking lots, an environment which is less structured than typical road networks and features complex, interactive maneuvers in a compact space. Using the CARLA simulator, we develop a parking lot environment and collect a dataset of human parking maneuvers. We then study the impact of model complexity and feature information by comparing a multi-modal Long Short-Term Memory (LSTM) prediction model and a Convolution Neural Network LSTM (CNN-LSTM) to a physics-based Extended Kalman Filter (EKF) baseline. Our results show that 1) intent…
With the development of advanced communication technology, connected vehicles become increasingly popular in our transportation systems, which can conduct cooperative maneuvers with each other as well as road entities through vehicle-to-everything communication. A lot of research interests have been drawn to other building blocks of a connected vehicle system, such as communication, planning, and control. However, less research studies were focused on the human-machine cooperation and interface, namely how to visualize the guidance information to the driver as an advanced driver-assistance sys…
