Perception and localization are essential for autonomous delivery vehicles, mostly estimated from 3D LiDAR sensors due to their precise distance measurement capability. This paper presents a strategy to obtain the real-time pseudo point cloud instead of the laser sensor from the image sensor. We propose an approach to use different depth estimators to obtain pseudo point clouds like LiDAR to obtain better performance. Moreover, the training and validating strategy of the depth estimator has adopted stereo imagery data to estimate more accurate depth estimation as well as point cloud results. Our approach to generating depth maps outperforms on KITTI benchmark while yielding point clouds significantly faster than other approaches.
CUHK-SenseTime Joint Laboratory, The Chinese University of Hong Kong（香港中文大学-商汤科技联合实验室，香港中文大学）
Stereo-based 3D detection aims at detecting 3D object bounding boxes from stereo images using intermediate depth maps or implicit 3D geometry representations, which provides a low-cost solution for 3D perception. However, its performance is still inferior compared with LiDAR-based detection algorithms. To detect and localize accurate 3D bounding boxes, LiDAR-based models can encode accurate object boundaries and surface normal directions from LiDAR point clouds. However, the detection results of stereo-based detectors are easily affected by the erroneous depth features due to the limitation of…
This paper as technology report is focusing on evaluation and performance about depth estimations based on lidar data and stereo images(front left and front right). The lidar 3d cloud data and stereo images are provided by ford. In addition, this paper also will explain some details about optimization for depth estimation performance. And some reasons why not use machine learning to do depth estimation, replaced by pure mathmatics to do stereo depth estimation. The structure of this paper is made of by following:(1) Performance: to discuss and evaluate about depth maps created from stereo imag…
Karlsruhe Institute of Technology（卡尔斯鲁厄理工学院）；FZI Research Center for Information Technology（FZI信息技术研究中心）
In this paper, we present TEScalib, a novel extrinsic self-calibration approach of LiDAR and stereo camera using the geometric and photometric information of surrounding environments without any calibration targets for automated driving vehicles. Since LiDAR and stereo camera are widely used for sensor data fusion on automated driving vehicles, their extrinsic calibration is highly important. However, most of the LiDAR and stereo camera calibration approaches are mainly target-based and therefore time consuming. Even the newly developed targetless approaches in last years are either inaccurate…
Stereo-LiDAR fusion is a promising task in that we can utilize two different types of 3D perceptions for practical usage -- dense 3D information (stereo cameras) and highly-accurate sparse point clouds (LiDAR). However, due to their different modalities and structures, the method of aligning sensor data is the key for successful sensor fusion. To this end, we propose a geometry-aware stereo-LiDAR fusion network for long-range depth estimation, called volumetric propagation network. The key idea of our network is to exploit sparse and accurate point clouds as a cue for guiding correspondences o…
Institute of Industrial Science, the University of Tokyo（东京大学生产技术研究所）；Human Informatics Laboratories, Nippon Telegraph and Telephone Corporation（日本电信电话株式会社人类信息学实验室）
We propose a non-learning depth completion method for a sparse depth map captured using a light detection and ranging (LiDAR) sensor guided by a pair of stereo images. Generally, conventional stereo-aided depth completion methods have two limiations. (i) They assume the given sparse depth map is accurately aligned to the input image, whereas the alignment is difficult to achieve in practice. (ii) They have limited accuracy in the long range because the depth is estimated by pixel disparity. To solve the abovementioned limitations, we propose selective stereo matching (SSM) that searches the mo…
Robust and accurate depth estimation by fusing LiDAR and Stereo
University of the Chinese Academy of Sciences（中国科学院大学）；Institute of Automation, Chinese Academy of Sciences（中国科学院自动化研究所）；Electric Power Research Institute, State Grid Shandong Electric Power Company（国网山东省电力公司电力科学研究院）
The complementary fusion of light detection and ranging (LiDAR) data and image data is a promising but challenging task for generating high-precision and high-density point clouds. This study proposes an innovative LiDAR-guided stereo matching approach called LiDAR-guided stereo matching (LGSM), which considers the spatial consistency represented by continuous disparity or depth changes in the homogeneous region of an image. The LGSM first detects the homogeneous pixels of each LiDAR projection point based on their color or intensity similarity. Next, we propose a riverbed enhancement function…
SeasonStereo: Robust Dense Stereo Matching for Multi-Date Satellite Imagery via Generative AI
Eurecat（欧罗卡特技术中心）；IIE, Facultad de Ingeniería, Universidad de la República（乌拉圭共和国大学工程学院IIE）；Universitat Pompeu Fabra（庞培法布拉大学）；Université Paris-Saclay（巴黎萨克雷大学）；CNRS（法国国家科学研究中心）；ENS Paris-Saclay（巴黎萨克雷高等师范学校）；Institut Universitaire de France（法国大学研究院）
Multi-view stereo (MVS) reconstruction is essential for creating 3D models. The approach involves applying epipolar rectification followed by dense matching for disparity estimation. However, existing approaches face challenges in applying dense matching for images with different viewpoints primarily due to large differences in object scale. In this paper, we propose a spherical model for epipolar rectification to minimize distortions caused by differences in principal rays. We evaluate the proposed approach using two aerial-based datasets consisting of multi-camera head systems. We show throu…
We present an approach to depth estimation that fuses information from a stereo pair with sparse range measurements derived from a LIDAR sensor or a range camera. The goal of this work is to exploit the complementary strengths of the two sensor modalities, the accurate but sparse range measurements and the ambiguous but dense stereo information. These two sources are effectively and efficiently fused by combining ideas from anisotropic diffusion and semi-global matching. We evaluate our approach on the KITTI 2015 and Middlebury 2014 datasets, using randomly sampled ground truth range measureme…
There has been tremendous research progress in estimating the depth of a scene from a monocular camera image. Existing methods for single-image depth prediction are exclusively based on deep neural networks, and their training can be unsupervised using stereo image pairs, supervised using LiDAR point clouds, or semi-supervised using both stereo and LiDAR. In general, semi-supervised training is preferred as it does not suffer from the weaknesses of either supervised training, resulting from the difference in the cameras and the LiDARs field of view, or unsupervised training, resulting from the…
Plane feature is a kind of stable landmark to reduce drift error in SLAM system. It is easy and fast to extract planes from dense point cloud, which is commonly acquired from RGB-D camera or lidar. But for stereo camera, it is hard to compute dense point cloud accurately and efficiently. In this paper, we propose a novel method to compute plane parameters using intersecting lines which are extracted from the stereo image. The plane features commonly exist on the surface of man-made objects and structure, which have regular shape and straight edge lines. In 3D space, two intersecting lines can …
Although nowadays advanced dense image matching (DIM) algorithms are able to produce LiDAR (Light Detection And Ranging) comparable dense point clouds from satellite stereo images, the accuracy and completeness of such point clouds heavily depend on the geometric parameters of the satellite stereo images. The intersection angle between two images are normally seen as the most important one in stereo data acquisition, as the state-of-the-art DIM algorithms work best on narrow baseline (smaller intersection angle) stereos (E.g. Semi-Global Matching regards 15-25 degrees as good intersection angl…
Convolutional neural networks (CNNs) have become increasingly popular for solving a variety of computer vision tasks, ranging from image classification to image segmentation. Recently, autonomous vehicles have created a demand for depth information, which is often obtained using hardware sensors such as Light detection and ranging (LIDAR). Although it can provide precise distance measurements, most LIDARs are still far too expensive to sell in mass-produced consumer vehicles, which has motivated methods to generate depth information from commodity automotive sensors like cameras. In this paper…
China University of Mining and Technology（中国矿业大学）；Shanghai Jiao Tong University（上海交通大学）
In the existing methods, LiDAR odometry shows superior performance, but visual odometry is still widely used for its price advantage. Conventionally, the task of visual odometry mainly rely on the input of continuous images. However, it is very complicated for the odometry network to learn the epipolar geometry information provided by the images. In this paper, the concept of pseudo-LiDAR is introduced into the odometry to solve this problem. The pseudo-LiDAR point cloud back-projects the depth map generated by the image into the 3D point cloud, which changes the way of image representation. C…
Northwestern Polytechnical University（西北工业大学）；Australian National University（澳大利亚国立大学）；ACRV；Data61 CSIRO（联邦科学与工业研究组织Data61）；NEC Laboratories America（NEC美国实验室）
In this paper, we present LidarStereoNet, the first unsupervised Lidar-stereo fusion network, which can be trained in an end-to-end manner without the need of ground truth depth maps. By introducing a novel "Feedback Loop'' to connect the network input with output, LidarStereoNet could tackle both noisy Lidar points and misalignment between sensors that have been ignored in existing Lidar-stereo fusion studies. Besides, we propose to incorporate a piecewise planar model into network learning to further constrain depths to conform to the underlying 3D geometry. Extensive quantitative and qualit…
ShanghaiTech University（上海科技大学）；The Chinese University of Hong Kong（香港中文大学）
3D detection plays an indispensable role in environment perception. Due to the high cost of commonly used LiDAR sensor, stereo vision based 3D detection, as an economical yet effective setting, attracts more attention recently. For these approaches based on 2D images, accurate depth information is the key to achieve 3D detection, and most existing methods resort to a preliminary stage for depth estimation. They mainly focus on the global depth and neglect the property of depth information in this specific task, namely, sparsity and locality, where exactly accurate depth is only needed for thes…
The complementary characteristics of active and passive depth sensing techniques motivate the fusion of the Li-DAR sensor and stereo camera for improved depth perception. Instead of directly fusing estimated depths across LiDAR and stereo modalities, we take advantages of the stereo matching network with two enhanced techniques: Input Fusion and Conditional Cost Volume Normalization (CCVNorm) on the LiDAR information. The proposed framework is generic and closely integrated with the cost volume component that is commonly utilized in stereo matching neural networks. We experimentally verify the…
Indian Institute of Technology Madras（印度理工学院马德拉斯分校）
Display technologies have evolved over the years. It is critical to develop practical HDR capturing, processing, and display solutions to bring 3D technologies to the next level. Depth estimation of multi-exposure stereo image sequences is an essential task in the development of cost-effective 3D HDR video content. In this paper, we develop a novel deep architecture for multi-exposure stereo depth estimation. The proposed architecture has two novel components. First, the stereo matching technique used in traditional stereo depth estimation is revamped. For the stereo depth estimation component…
This work proposes a new method to accurately complete sparse LiDAR maps guided by RGB images. For autonomous vehicles and robotics the use of LiDAR is indispensable in order to achieve precise depth predictions. A multitude of applications depend on the awareness of their surroundings, and use depth cues to reason and react accordingly. On the one hand, monocular depth prediction methods fail to generate absolute and precise depth maps. On the other hand, stereoscopic approaches are still significantly outperformed by LiDAR based approaches. The goal of the depth completion task is to generat…
PLA Strategic Support Force Information Engineering University（中国人民解放军战略支援部队信息工程大学）；Shenzhen University（深圳大学）
Stereo matching is a fundamental task for 3D scene reconstruction. Recently, deep learning based methods have proven effective on some benchmark datasets, such as KITTI and Scene Flow. UAVs (Unmanned Aerial Vehicles) are commonly utilized for surface observation, and their captured images are frequently used for detailed 3D reconstruction due to high resolution and low-altitude acquisition. At present, the mainstream supervised learning network requires a significant amount of training data with ground-truth labels to learn model parameters. However, due to the scarcity of UAV stereo matching …
Huazhong University of Science and Technology（华中科技大学）；Baidu Inc.（百度公司）
In this paper, we propose a cross-modal distillation method named StereoDistill to narrow the gap between the stereo and LiDAR-based approaches via distilling the stereo detectors from the superior LiDAR model at the response level, which is usually overlooked in 3D object detection distillation. The key designs of StereoDistill are: the X-component Guided Distillation~(XGD) for regression and the Cross-anchor Logit Distillation~(CLD) for classification. In XGD, instead of empirically adopting a threshold to select the high-quality teacher predictions as soft targets, we decompose the predicte…
Rethinking the Key Factors for the Generalization of Remote Sensing Stereo Matching Networks
Aerospace Information Research Institute, Chinese Academy of Sciences（中国科学院空天信息创新研究院）；School of Electronic, Electrical and Communication Engineering, University of Chinese Academy of Sciences（中国科学院大学电子电气与通信工程学院）
University of Michigan（密歇根大学）；Tsinghua University（清华大学）
This paper reports a new continuous 3D loss function for learning depth from monocular images. The dense depth prediction from a monocular image is supervised using sparse LIDAR points, which enables us to leverage available open source datasets with camera-LIDAR sensor suites during training. Currently, accurate and affordable range sensor is not readily available. Stereo cameras and LIDARs measure depth either inaccurately or sparsely/costly. In contrast to the current point-to-point loss evaluation approach, the proposed 3D loss treats point clouds as continuous objects; therefore, it compe…
Technical University of Munich（慕尼黑工业大学）；Sun Yat-sen University（中山大学）
The proposal of Pseudo-Lidar representation has significantly narrowed the gap between visual-based and active Lidar-based 3D object detection. However, current researches exclusively focus on pushing the accuracy improvement of Pseudo-Lidar by taking the advantage of complex and time-consuming neural networks. Seldom explore the profound characteristics of Pseudo-Lidar representation to obtain the promoting opportunities. In this paper, we dive deep into the pseudo Lidar representation and argue that the performance of 3D object detection is not fully dependent on the high precision stereo de…
The University of Adelaide（阿德莱德大学）；Tsinghua University（清华大学）；Huazhong University of Science and Technology（华中科技大学）；Shanghai Institute for Advanced Communications and Data Science, Shanghai University（上海大学上海先进通信与数据科学研究院）
Most existing algorithms for depth estimation from single monocular images need large quantities of metric groundtruth depths for supervised learning. We show that relative depth can be an informative cue for metric depth estimation and can be easily obtained from vast stereo videos. Acquiring metric depths from stereo videos is sometimes impracticable due to the absence of camera parameters. In this paper, we propose to improve the performance of metric depth estimation with relative depths collected from stereo movie videos using existing stereo matching algorithm. We introduce a new "Relati…
Place recognition is a core component of Simultaneous Localization and Mapping (SLAM) algorithms. Particularly in visual SLAM systems, previously-visited places are recognized by measuring the appearance similarity between images representing these locations. However, such approaches are sensitive to visual appearance change and also can be computationally expensive. In this paper, we propose an alternative approach adapting LiDAR descriptors for 3D points obtained from stereo-visual odometry for place recognition. 3D points are potentially more reliable than 2D visual cues (e.g., 2D features)…
Vellore Institute of Technology, Chennai（金奈韦洛尔理工大学）；Birla Institute of Technology and Science, Hyderabad（海得拉巴比尔拉理工学院）；Veermata Jijabai Technological Institute, Mumbai（孟买韦尔马塔·吉贾拜技术学院）；International Institute of Information and Technology, Hyderabad（海得拉巴国际信息技术学院）
With the advent of autonomous vehicles, LiDAR and cameras have become an indispensable combination of sensors. They both provide rich and complementary data which can be used by various algorithms and machine learning to sense and make vital inferences about the surroundings. We propose a novel pipeline and experimental setup to find accurate rigid-body transformation for extrinsically calibrating a LiDAR and a camera. The pipeling uses 3D-3D point correspondences in LiDAR and camera frame and gives a closed form solution. We further show the accuracy of the estimate by fusing point clouds fro…
Mapping and 3D detection are two major issues in vision-based robotics, and self-driving. While previous works only focus on each task separately, we present an innovative and efficient multi-task deep learning framework (SM3D) for Simultaneous Mapping and 3D Detection by bridging the gap with robust depth estimation and "Pseudo-LiDAR" point cloud for the first time. The Mapping module takes consecutive monocular frames to generate depth and pose estimation. In 3D Detection module, the depth estimation is projected into 3D space to generate "Pseudo-LiDAR" point cloud, where LiDAR-based 3D dete…
Beihang University（北京航空航天大学）；National University of Singapore（新加坡国立大学）；Institute for Infocomm Research（资讯通信研究院）
Deep stereo matching has made significant progress in recent years. However, state-of-the-art methods are based on expensive 4D cost volume, which limits their use in real-world applications. To address this issue, 3D correlation maps and iterative disparity updates have been proposed. Regarding that in real-world platforms, such as self-driving cars and robots, the Lidar is usually installed. Thus we further introduce the sparse Lidar point into the iterative updates, which alleviates the burden of network updating the disparity from zero states. Furthermore, we propose training the network i…
Cerema（法国路桥与道路研究中心）；Institut de Recherche en Informatique de Toulouse（图卢兹计算机科学研究所）；Université de Toulouse（图卢兹大学）；Universidad Carlos III de Madrid（马德里卡洛斯三世大学）；Queen Mary University of London（伦敦玛丽女王大学）
The ability to accurately detect and localize objects is recognized as being the most important for the perception of self-driving cars. From 2D to 3D object detection, the most difficult is to determine the distance from the ego-vehicle to objects. Expensive technology like LiDAR can provide a precise and accurate depth information, so most studies have tended to focus on this sensor showing a performance gap between LiDAR-based methods and camera-based methods. Although many authors have investigated how to fuse LiDAR with RGB cameras, as far as we know there are no studies to fuse LiDAR and…
Most autonomous vehicles are equipped with LiDAR sensors and stereo cameras. The former is very accurate but generates sparse data, whereas the latter is dense, has rich texture and color information but difficult to extract robust 3D representations from. In this paper, we propose a novel data fusion algorithm to combine accurate point clouds with dense but less accurate point clouds obtained from stereo pairs. We develop a framework to integrate this algorithm into various 3D object detection methods. Our framework starts with 2D detections from both of the RGB images, calculates frustums an…
DFKI – German Research Center for Artificial Intelligence（德国人工智能研究中心）；BMW Group（宝马集团）
We propose a new approach called LiDAR-Flow to robustly estimate a dense scene flow by fusing a sparse LiDAR with stereo images. We take the advantage of the high accuracy of LiDAR to resolve the lack of information in some regions of stereo images due to textureless objects, shadows, ill-conditioned light environment and many more. Additionally, this fusion can overcome the difficulty of matching unstructured 3D points between LiDAR-only scans. Our LiDAR-Flow approach consists of three main steps; each of them exploits LiDAR measurements. First, we build strong seeds from LiDAR to enhance the…
Toyota Research Institute（丰田研究院）；Toyota Technological Institute at Chicago（芝加哥丰田技术学院）
Self-supervised monocular depth and ego-motion estimation is a promising approach to replace or supplement expensive depth sensors such as LiDAR for robotics applications like autonomous driving. However, most research in this area focuses on a single monocular camera or stereo pairs that cover only a fraction of the scene around the vehicle. In this work, we extend monocular self-supervised depth and ego-motion estimation to large-baseline multi-camera rigs. Using generalized spatio-temporal contexts, pose consistency constraints, and carefully designed photometric loss masking, we learn a si…
University of Electronic Science and Technology of China（电子科技大学）
3D object detection has become an emerging task in autonomous driving scenarios. Previous works process 3D point clouds using either projection-based or voxel-based models. However, both approaches contain some drawbacks. The voxel-based methods lack semantic information, while the projection-based methods suffer from numerous spatial information loss when projected to different views. In this paper, we propose the Stereo RGB and Deeper LIDAR (SRDL) framework which can utilize semantic and spatial information simultaneously such that the performance of network for 3D object detection can be im…
We present a deep learning system to infer the posterior distribution of a dense depth map associated with an image, by exploiting sparse range measurements, for instance from a lidar. While the lidar may provide a depth value for a small percentage of the pixels, we exploit regularities reflected in the training set to complete the map so as to have a probability over depth for each pixel in the image. We exploit a Conditional Prior Network, that allows associating a probability to each depth value given an image, and combine it with a likelihood term that uses the sparse measurements. Option…
Diachronic Stereo Matching for Multi-Date Satellite Imagery
IIE, Facultad de Ingeniería, Universidad de la República（乌拉圭国家工程院，工程学院，乌拉圭共和国大学）；Politecnico di Torino（托斯卡纳理工学院）；Eurecat, Centre Tecnologic de Catalunya（欧洲催化中心，加泰罗尼亚技术中心）；AMIAD, Pôle Recherche（AMIAD研究极）；Universite Paris-Saclay, CNRS, ENS Paris-Saclay, Centre Borelli（巴黎萨克雷大学，国家科学研究中心，巴黎萨克雷高等师范学校，博雷利中心）；Institut Universitaire de France（法国国家科学研究中心）
Cornell University（康奈尔大学）；The Ohio State University（俄亥俄州立大学）
Detecting objects such as cars and pedestrians in 3D plays an indispensable role in autonomous driving. Existing approaches largely rely on expensive LiDAR sensors for accurate depth information. While recently pseudo-LiDAR has been introduced as a promising alternative, at a much lower cost based solely on stereo images, there is still a notable performance gap. In this paper we provide substantial advances to the pseudo-LiDAR framework through improvements in stereo depth estimation. Concretely, we adapt the stereo network architecture and loss function to be more aligned with accurate depth…
An accurate depth map of the environment is critical to the safe operation of autonomous robots and vehicles. Currently, either light detection and ranging (LIDAR) or stereo matching algorithms are used to acquire such depth information. However, a high-resolution LIDAR is expensive and produces sparse depth map at large range; stereo matching algorithms are able to generate denser depth maps but are typically less accurate than LIDAR at long range. This paper combines these approaches together to generate high-quality dense depth maps. Unlike previous approaches that are trained using ground-…
Gated cameras hold promise as an alternative to scanning LiDAR sensors with high-resolution 3D depth that is robust to back-scatter in fog, snow, and rain. Instead of sequentially scanning a scene and directly recording depth via the photon time-of-flight, as in pulsed LiDAR sensors, gated imagers encode depth in the relative intensity of a handful of gated slices, captured at megapixel resolution. Although existing methods have shown that it is possible to decode high-resolution depth from such measurements, these methods require synchronized and calibrated LiDAR to supervise the gated depth …
German Research Center for Artificial Intelligence - DFKI（德国人工智能研究中心）；Birla Institute of Technology and Science - BITS Pilani（比尔拉技术与科学学院）；University of Applied Sciences Mannheim（曼海姆应用科学大学）；University of Kaiserslautern - TUK（凯泽斯劳滕大学）
Scene flow is the dense 3D reconstruction of motion and geometry of a scene. Most state-of-the-art methods use a pair of stereo images as input for full scene reconstruction. These methods depend a lot on the quality of the RGB images and perform poorly in regions with reflective objects, shadows, ill-conditioned light environment and so on. LiDAR measurements are much less sensitive to the aforementioned conditions but LiDAR features are in general unsuitable for matching tasks due to their sparse nature. Hence, using both LiDAR and RGB can potentially overcome the individual disadvantages of…
YOLO and SGBM Integration for Autonomous Tree Branch Detection and Depth Estimation in Radiata Pine Pruning Applications
Centre for Data Science and Artificial Intelligence（数据科学与人工智能中心）；Victoria University of Wellington（惠灵顿维多利亚大学）；Department of Computer Science and Software Engineering（计算机科学与软件工程系）；University of Canterbury（坎特伯雷大学）
The Chinese University of Hong Kong（香港中文大学）；SmartMore（思谋科技）
Most state-of-the-art 3D object detectors heavily rely on LiDAR sensors because there is a large performance gap between image-based and LiDAR-based methods. It is caused by the way to form representation for the prediction in 3D scenarios. Our method, called Deep Stereo Geometry Network (DSGN), significantly reduces this gap by detecting 3D objects on a differentiable volumetric representation -- 3D geometric volume, which effectively encodes 3D geometric structure for 3D regular space. With this representation, we learn depth information and semantic cues simultaneously. For the first time, …
National Robotics Engineering Center（国家机器人工程中心）；Carnegie Mellon University（卡内基梅隆大学）
As object detectors rapidly improve, attention has expanded past image-only networks to include a range of 3D and multimodal frameworks, especially ones that incorporate LiDAR. However, due to cost, logistics, and even some safety considerations, stereo can be an appealing alternative. Towards understanding the efficacy of stereo as a replacement for monocular input or LiDAR in object detectors, we show that multimodal learning with traditional disparity algorithms can improve image-based results without increasing the number of parameters, and that learning over stereo error can impart simila…
We present a method for detecting and mapping trees in noisy stereo camera point clouds, using a learned 3-D object detector. Inspired by recent advancements in 3-D object detection using a pseudo-lidar representation for stereo data, we train a PointRCNN detector to recognize trees in forest-like environments. We generate detector training data with a novel automatic labeling process that clusters a fused global point cloud. This process annotates large stereo point cloud training data sets with minimal user supervision, and unlike previous pseudo-lidar detection pipelines, requires no 3-D gr…
