Multiple object tracking (MOT) is a significant task in achieving autonomous driving. Traditional works attempt to complete this task, either based on point clouds (PC) collected by LiDAR, or based on images captured from cameras. However, relying on one single sensor is not robust enough, because it might fail during the tracking process. On the other hand, feature fusion from multiple modalities contributes to the improvement of accuracy. As a result, new techniques based on different sensors integrating features from multiple modalities are being developed. Texture information from RGB cameras and 3D structure information from Lidar have respective advantages under different circumstances. However, it's not easy to achieve effective feature fusion because of completely distinct information modalities. Previous fusion methods usually fuse the top-level features after the backbones extract the features from different modalities. In this paper, we first introduce PointNet++ to obtain multi-scale deep representations of point cloud to make it adaptive to our proposed Interactive Feature Fusion between multi-scale features of images and point clouds. Specifically, through multi-scale interactive query and fusion between pixel-level and point-level features, our method, can obtain more distinguishing features to improve the performance of multiple object tracking. Besides, we explore the effectiveness of pre-training on each single modality and fine-tuning on the fusion-based model. The experimental results demonstrate that our method can achieve good performance on the KITTI benchmark and outperform other approaches without using multi-scale feature fusion. Moreover, the ablation studies indicates the effectiveness of multi-scale feature fusion and pre-training on single modality.
This paper proposes a process that uses two cameras to obtain three-dimensional (3D) information of a target object for human tracking. Results of human detection and tracking from two cameras are integrated to obtain the 3D information. OpenPose is used for human detection. In the case of a general processing a stereo camera, a range image of the entire scene is acquired as precisely as possible, and then the range image is processed. However, there are problems such as incorrect matching and computational cost for the calibration process. A new stereo vision framework is proposed to cope wit…
Nanjing University of Science and Technology（南京理工大学）；Huawei Inc.（华为公司）
To understand a complex action, multiple sources of information, including appearance, positional, and semantic features, need to be integrated. However, these features are difficult to be fused since they often differ significantly in modality and dimensionality. In this paper, we present a novel framework that accomplishes this goal by interactive fusion, namely, projecting features across different spaces and guiding it using an auxiliary prediction task. Specifically, we implement the framework in three steps, namely, positional-to-appearance feature extraction, semantic feature interactio…
This paper presents a new approach to accurately track a moving vehicle with a multiview setup of red-green-blue depth (RGBD) cameras. We first propose a correction method to eliminate a shift, which occurs in depth sensors when they become worn. This issue could not be otherwise corrected with the ordinary calibration procedure. Next, we present a sensor-wise filtering system to correct for an unknown vehicle motion. A data fusion algorithm is then used to optimally merge the sensor-wise estimated trajectories. We implement most parts of our solution in the graphic processor. Hence, the whole…
Multi-object tracking (MOT) enables mobile robots to perform well-informed motion planning and navigation by localizing surrounding objects in 3D space and time. Existing methods rely on depth sensors (e.g., LiDAR) to detect and track targets in 3D space, but only up to a limited sensing range due to the sparsity of the signal. On the other hand, cameras provide a dense and rich visual signal that helps to localize even distant objects, but only in the image domain. In this paper, we propose EagerMOT, a simple tracking formulation that eagerly integrates all available object observations from …
ETH Zürich（苏黎世联邦理工学院）；National Tsing Hua University（台湾清华大学）
To track the 3D locations and trajectories of the other traffic participants at any given time, modern autonomous vehicles are equipped with multiple cameras that cover the vehicle's full surroundings. Yet, camera-based 3D object tracking methods prioritize optimizing the single-camera setup and resort to post-hoc fusion in a multi-camera setup. In this paper, we propose a method for panoramic 3D object tracking, called CC-3DT, that associates and models object trajectories both temporally and across views, and improves the overall tracking consistency. In particular, our method fuses 3D detec…
A robust algorithm solution is proposed for tracking an object in complex video scenes. In this solution, the bootstrap particle filter (PF) is initialized by an object detector, which models the time-evolving background of the video signal by an adaptive Gaussian mixture. The motion of the object is expressed by a Markov model, which defines the state transition prior. The color and texture features are used to represent the object, and a marginal likelihood based feature fusion approach is proposed. A corresponding object template model updating procedure is developed to account for possible…
Jiangnan University（江南大学）；University of Surrey（萨里大学）
We address the problem of multi-modal object tracking in video and explore various options of fusing the complementary information conveyed by the visible (RGB) and thermal infrared (TIR) modalities including pixel-level, feature-level and decision-level fusion. Specifically, different from the existing methods, paradigm of image fusion task is heeded for fusion at pixel level. Feature-level fusion is fulfilled by attention mechanism with channels excited optionally. Besides, at decision level, a novel fusion strategy is put forward since an effortless averaging configuration has shown the sup…
3D multi-object tracking is a crucial component in the perception system of autonomous driving vehicles. Tracking all dynamic objects around the vehicle is essential for tasks such as obstacle avoidance and path planning. Autonomous vehicles are usually equipped with different sensor modalities to improve accuracy and reliability. While sensor fusion has been widely used in object detection networks in recent years, most existing multi-object tracking algorithms either rely on a single input modality, or do not fully exploit the information provided by multiple sensing modalities. In this work…
Object Tracking is one important problem in computer vision and surveillance system. The existing models mainly exploit the single-view feature (i.e. color, texture, shape) to solve the problem, failing to describe the objects comprehensively. In this paper, we solve the problem from multi-view perspective by leveraging multi-view complementary and latent information, so as to be robust to the partial occlusion and background clutter especially when the objects are similar to the target, meanwhile addressing tracking drift. However, one big problem is that multi-view fusion strategy can inevit…
In the recent literature, on the one hand, many 3D multi-object tracking (MOT) works have focused on tracking accuracy and neglected computation speed, commonly by designing rather complex cost functions and feature extractors. On the other hand, some methods have focused too much on computation speed at the expense of tracking accuracy. In view of these issues, this paper proposes a robust and fast camera-LiDAR fusion-based MOT method that achieves a good trade-off between accuracy and speed. Relying on the characteristics of camera and LiDAR sensors, an effective deep association mechanism i…
Environment modeling in autonomous driving is realized by two fundamental approaches, grid-based and feature-based approach. Both methods interpret the environment differently and show some situation-dependent beneficial realizations. In order to use the advantages of both methods, a combination makes sense. This work presents a fusion, which establishes an association between the representations of environment modeling and then decoupled from this performs a fusion of the information. Thus, there is no need to adapt the environment models. The developed fusion generates new hypotheses, which …
Leibniz Universität Hannover（莱布尼茨汉诺威大学）；Technische Universität München（慕尼黑工业大学）
In order to track all persons in a scene, the tracking-by-detection paradigm has proven to be a very effective approach. Yet, relying solely on a single detector is also a major limitation, as useful image information might be ignored. Consequently, this work demonstrates how to fuse two detectors into a tracking system. To obtain the trajectories, we propose to formulate tracking as a weighted graph labeling problem, resulting in a binary quadratic program. As such problems are NP-hard, the solution can only be approximated. Based on the Frank-Wolfe algorithm, we present a new solver that is …
Visual Tracking is a complex problem due to unconstrained appearance variations and dynamic environment. Extraction of complementary information from the object environment via multiple features and adaption to the target's appearance variations are the key problems of this work. To this end, we propose a robust object tracking framework based on Unified Graph Fusion (UGF) of multi-cue to adapt to the object's appearance. The proposed cross-diffusion of sparse and dense features not only suppresses the individual feature deficiencies but also extracts the complementary information from multi-c…
This paper presents a novel method for pedestrian detection and tracking by fusing camera and LiDAR sensor data. To deal with the challenges associated with the autonomous driving scenarios, an integrated tracking and detection framework is proposed. The detection phase is performed by converting LiDAR streams to computationally tractable depth images, and then, a deep neural network is developed to identify pedestrian candidates both in RGB and depth images. To provide accurate information, the detection phase is further enhanced by fusing multi-modal sensor information using the Kalman filte…
Feature fusion and similarity computation are two core problems in 3D object tracking, especially for object tracking using sparse and disordered point clouds. Feature fusion could make similarity computing more efficient by including target object information. However, most existing LiDAR-based approaches directly use the extracted point cloud feature to compute similarity while ignoring the attention changes of object regions during tracking. In this paper, we propose a feature fusion network based on transformer architecture. Benefiting from the self-attention mechanism, the transformer enc…
Fuzhou University（福州大学）；Tencent AI Lab（腾讯人工智能实验室）；Jiangnan University（江南大学）；South China University of Technology（华南理工大学）；City University of Hong Kong（香港城市大学）
The tracking-by-detection framework receives growing attentions through the integration with the Convolutional Neural Networks (CNNs). Existing tracking-by-detection based methods, however, fail to track objects with severe appearance variations. This is because the traditional convolutional operation is performed on fixed grids, and thus may not be able to find the correct response while the object is changing pose or under varying environmental conditions. In this paper, we propose a deformable convolution layer to enrich the target appearance representations in the tracking-by-detection fra…
Tsinghua University（清华大学）；Mogo Auto Intelligence and Telemetics Information Technology Co. Ltd.（蘑菇车联智能网联科技有限公司）
3D Multi-object tracking (MOT) ensures consistency during continuous dynamic detection, conducive to subsequent motion planning and navigation tasks in autonomous driving. However, camera-based methods suffer in the case of occlusions and it can be challenging to accurately track the irregular motion of objects for LiDAR-based methods. Some fusion methods work well but do not consider the untrustworthy issue of appearance features under occlusion. At the same time, the false detection problem also significantly affects tracking. As such, we propose a novel camera-LiDAR fusion 3D MOT framework …
College of Computer Science and Technology, Zhejiang University of Technology（浙江工业大学计算机科学与技术学院）；Key Laboratory of Intelligent Perception and Systems for High-Dimensional Information of Ministry of Education, Nanjing University of Science and Technology（南京理工大学智能感知与高维信息处理教育部重点实验室）
According to observations, different visual objects have different salient features in different scenarios. Even for the same object, its salient shape and appearance features may change greatly from time to time in a long-term tracking task. Motivated by them, we proposed an end-to-end feature fusion framework based on Siamese network, named FF-Siam, which can effectively fuse different features for adaptive visual tracking. The framework consists of four layers. A feature extraction layer is designed to extract the different features of the target region and search region. The extracted feat…
School of Computer Science and Technology, Nanjing University of Posts and Telecommunications（南京邮电大学计算机科学与技术学院）
In this article, we are concerned with tracking an object of interest in video stream. We propose an algorithm that is robust against occlusion, the presence of confusing colors, abrupt changes in the object feature space and changes in object size. We develop the algorithm within a Bayesian modeling framework. The state space model is used for capturing the temporal correlation in the sequence of frame images by modeling the underlying dynamics of the tracking system. The Bayesian model averaging (BMA) strategy is proposed for fusing multi-clue information in the observations. Any number of o…
Yazd University（亚兹德大学）；Sharif University of Technology（谢里夫理工大学）；University of Alberta（阿尔伯塔大学）；Aalborg University（奥尔堡大学）
Visual object tracking remains an active research field in computer vision due to persisting challenges with various problem-specific factors in real-world scenes. Many existing tracking methods based on discriminative correlation filters (DCFs) employ feature extraction networks (FENs) to model the target appearance during the learning process. However, using deep feature maps extracted from FENs based on different residual neural networks (ResNets) has not previously been investigated. This paper aims to evaluate the performance of twelve state-of-the-art ResNet-based FENs in a DCF-based fra…
Interactive Tracking: A Human-in-the-Loop Paradigm with Memory-Augmented Adaptation
Pengcheng Laboratory（鹏城实验室）；Harbin Institute of Technology, Shenzhen（哈尔滨工业大学（深圳））；South China University of Technology（华南理工大学）；Pazhou Lab (Huangpu)（琶洲实验室（黄埔））；UC Merced（加州大学默塞德分校）；Yonsei University（延世大学）
Liaoning Normal University（辽宁师范大学）；Dalian University of Technology（大连理工大学）
General deep learning-based methods for infrared and visible image fusion rely on the unsupervised mechanism for vital information retention by utilizing elaborately designed loss functions. However, the unsupervised mechanism depends on a well designed loss function, which cannot guarantee that all vital information of source images is sufficiently extracted. In this work, we propose a novel interactive feature embedding in self-supervised learning framework for infrared and visible image fusion, attempting to overcome the issue of vital information degradation. With the help of self-supervis…
In this paper, we propose a novel fully convolutional two-stream fusion network (FCTSFN) for interactive image segmentation. The proposed network includes two sub-networks: a two-stream late fusion network (TSLFN) that predicts the foreground at a reduced resolution, and a multi-scale refining network (MSRN) that refines the foreground at full resolution. The TSLFN includes two distinct deep streams followed by a fusion network. The intuition is that, since user interactions are more direct information on foreground/background than the image itself, the two-stream structure of the TSLFN reduce…
Aiming at the limitation that deep long and short-term memory network(DLSTM) algorithm cannot perform parallel computing and cannot obtain global information, in this paper, feature extraction and feature processing are firstly carried out according to the characteristics of eye movement data and tracking data, then by introducing a convolutional neural network (CNN) into a deep long and short-term memory network, developed a new network structure and designed a fusion strategy, an eye tracking data fusion algorithm based on long and short-term memory network is proposed. The experimental resu…
AFter: Attention-based Fusion Router for RGBT Tracking
Anhui University（安徽大学）；School of Computer Science and Technology, Anhui University（安徽大学计算机科学与技术学院）；School of Artificial Intelligence, Anhui University（安徽大学人工智能学院）
Changchun University of Science and Technology（长春理工大学）；Universidad Complutense（马德里康普顿斯大学）；Zhejiang Saisi Electronic Technology Co., Ltd.（浙江赛思电子科技有限公司）
Visual-based target tracking is easily influenced by multiple factors, such as background clutter, targets fast-moving, illumination variation, object shape change, occlusion, etc. These factors influence the tracking accuracy of a target tracking task. To address this issue, an efficient real-time target tracking method based on a low-dimension adaptive feature fusion is proposed to allow us the simultaneous implementation of the high-accuracy and real-time target tracking. First, the adaptive fusion of a histogram of oriented gradient (HOG) feature and color feature is utilized to improve th…
University of Bonn（波恩大学）；Indian Institute of Technology Bombay（印度理工学院孟买分校）；National University of Singapore（新加坡国立大学）
Segmenting objects of interest in an image is an essential building block of applications such as photo-editing and image analysis. Under interactive settings, one should achieve good segmentations while minimizing user input. Current deep learning-based interactive segmentation approaches use early fusion and incorporate user cues at the image input layer. Since segmentation CNNs have many layers, early fusion may weaken the influence of user interactions on the final prediction results. As such, we propose a new multi-stage guidance framework for interactive segmentation. By incorporating us…
Dynamic Disentangled Fusion Network for RGBT Tracking
Anhui University（安徽大学）；School of Artificial Intelligence, Anhui University（安徽大学人工智能学院）；School of Computer Science and Technology, Anhui University（安徽大学计算机科学与技术学院）
Ankara University（安卡拉大学）；HAVELSAN Inc.（HAVELSAN公司）；Lahore College for Women University（拉合尔女子学院）；University of Essex（埃塞克斯大学）
A tracking system that will be used for Augmented Reality (AR) applications has two main requirements: accuracy and frame rate. The first requirement is related to the performance of the pose estimation algorithm and how accurately the tracking system can find the position and orientation of the user in the environment. Accuracy problems of current tracking devices, considering that they are low-cost devices, cause static errors during this motion estimation process. The second requirement is related to dynamic errors (the end-to-end system delay; occurring because of the delay in estimating t…
