VirtualSync +:利用虚拟同步进行时序优化
VirtualSync+: Timing Optimization with Virtual Synchronization
摘要:
在数字电路设计中,诸如触发器之类的时序组件用于同步信号传播。逻辑计算在触发器级处对齐,因此被触发器级隔离。虽然这种完全同步的风格可以显著减少设计工作,但它可能会对电路性能产生负面影响,因为顺序组件只能将延迟引入信号传播,但不会加速它们。在本文中,我们提出了一个新的定时模型,VirtualSync+,其中的信号,特别是那些沿关键路线,被允许传播通过几个连续的阶段,没有触发器。在优化电路的边界处仍然满足时序约束,以保持与现有设计的一致接口。通过消除关键路线上触发器的时钟到q延迟和建立时间要求,电路的性能甚至可以被推到传统顺序设计的极限之外。此外,我们还通过使用商业设计工具进行微调,进一步增强了VirtualSync+的优化,例如,采用Synopsys公司的设计软件,使计算结果更加准确。实验结果表明,电路性能可以提高4%(平均1.5%)相比,极端重定时和规模,而面积的增加仍然可以忽略不计。这种时序性能的增强超出了传统时序设计的限制。仿真结果还表明,与经过重新定时和调整后的电路相比,采用VirtualSync+的电路在相同的面积代价下可以获得更好的定时性能,在相同的时钟周期下可以获得更小的面积代价。
英文摘要:
In digital circuit designs, sequential components such as flip-flops are used to synchronize signal propagations. Logic computations are aligned at and thus isolated by flip-flop stages. Although this fully synchronous style can reduce design efforts significantly, it may affect circuit performance negatively, because sequential components can only introduce delays into signal propagations but never accelerate them. In this paper, we propose a new timing model, VirtualSync+, in which signals, specially those along critical paths, are allowed to propagate through several sequential stages without flip-flops. Timing constraints are still satisfied at the boundary of the optimized circuit to maintain a consistent interface with existing designs. By removing clock-to-q delays and setup time requirements of flip-flops on critical paths, the performance of a circuit can be pushed even beyond the limit of traditional sequential designs. In addition, we further enhance the optimization with VirtualSync+ by fine-tuning with commercial design tools, e.g., Design Compiler from Synopsys, to achieve more accurate result. Experimental results demonstrate that circuit performance can be improved by up to 4% (average 1.5%) compared with that after extreme retiming and sizing, while the increase of area is still negligible. This timing performance is enhanced beyond the limit of traditional sequential designs. It also demonstrates that compared with those after retiming and sizing, the circuits with VirtualSync+ can achieve better timing performance under the same area cost or smaller area cost under the same clock period, respectively.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。