受限He II传热的毫秒时标测量
Millisecond Time-Scale Measurements of Heat Transfer to Confined He II
摘要:
我们探讨瞬态传热,毫秒的时间尺度上,从一个狭窄的,矩形的不锈钢加热器冷却,从一侧由He II限制到一个通道的120 $μ$ m深。除了两个截面约为通道断面10%的针孔外,氦与外槽隔离。我们测量了在慢脉冲加热(9 ms后达到峰值功率)、快脉冲加热(100 $μ$ s后达到峰值功率)和步进加热(100 $μ$ s后达到稳定功率)期间加热器条和通道氦气的温度。使用稳态Kapitza传热表达式在加热器和氦气之间的接口,和Gorter-Mellink传热制度的氦气通道中,我们获得了很好的模拟和测量之间的协议在第一个5毫秒的慢脉冲测试。而不是使用测得的氦气温度的Kapitza表达式,我们获得了极好的协议之间的模拟和测量加热器的响应在第一个150毫秒的慢脉冲测试。相同的模型不能解释加热器和氦气的快速脉冲瞬态响应,而它可以解释氦气对施加功率的阶跃的响应,但不能解释加热器的响应。因此,稳态Kapitza表达式可能不适用于在单个毫秒内结束的加热事件。
英文摘要:
We explore transient heat transfer, on the millisecond time-scale, from a narrow, rectangular stainless steel heater cooled from one side by He II confined to a channel of 120 $μ$m depth. The helium is isolated from the external bath with the exception of two pin-holes of cross section about 10% that of the channel. We measure the temperatures of both the heater strip and the channel helium during slow-pulse heating that reaches peak power after 9 ms, fast-pulse heating that reaches peak power after 100 $μ$s, and step heating that reaches steady power after 100 $μ$s. Using the steady state Kapitza heat transfer expression at the interface between heater and helium, and the Gorter-Mellink heat transfer regime in the helium channel, we obtain excellent agreement between simulation and measurement during the first 5 ms of slow-pulse tests. Using instead the measured helium temperature in the Kapitza expression, we obtain excellent agreement between the simulated and measured heater response during the first 150 ms of slow-pulse tests. The same model fails to explain the fast-pulse transient response of the heater and helium, while it can explain the helium response to a step in applied power but not the heater response. The steady state Kapitza expression may therefore not be applicable to heating events that are over within a single millisecond.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。