arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2203.04626physics.app-ph
收藏

He II开放槽传热的毫秒时标测量

Millisecond Time-Scale Measurements of Heat Transfer to an Open Bath of He II

Jonas Blomberg Ghini, Bernhard Auchmann, Bertrand Baudouy

摘要:

我们探讨稳态和瞬态传热从一个狭窄的,矩形的不锈钢加热带从一侧冷却的开放浴的He~II。通过将Kapitza传热表达式$Q = a_\mathrm{K} \left( {T_\mathrm{s}}^{n_\mathrm{K}} - {T_\mathrm{b}}^{n_\mathrm{K}} \right)$拟合至稳态测量值,发现拟合参数在预期范围内,从而完成设置确认; $a_\mathrm{K}$ = 1316.8 $\pm10\%$ $\mathrm{W}\mathrm{m}^{-2}\mathrm{K}^{-1}$,$n_\mathrm{K}$ = 2.528 $\pm10\%$。我们发现临界热通量与文献中的估计一致,并且加热步骤和膜沸腾开始之间的时间遵循预期的$\propto Q^{-4}$依赖性。在施加加热功率密度的步骤后的第一毫秒期间,我们的测量显示出比使用稳态Kapitza传热表达式作为冷却边界条件的我们的设置的时间依赖性一维模型所发现的热上升时间更慢。然而,结果与文献中的瞬态测量相比是有利的。在第一毫秒之后,测量和模型之间的一致性非常好。我们没有发现确凿的证据的Kapitza传热机制的取向依赖性,也没有传热差异,可以归因于沿同一加热器的局部表面变化。

英文摘要:

We explore steady state and transient heat transfer from a narrow, rectangular stainless steel heater strip cooled from one side by an open bath of He~II. Setup validation is done by fitting the Kapitza heat transfer expression $Q = a_\mathrm{K} \left( {T_\mathrm{s}}^{n_\mathrm{K}} - {T_\mathrm{b}}^{n_\mathrm{K}} \right)$ to steady state measurements, finding fit parameters within the expected range; $a_\mathrm{K}$ = 1316.8$\pm10\%$ $\mathrm{W}\mathrm{m}^{-2}\mathrm{K}^{-1}$, $n_\mathrm{K}$ = 2.528$\pm10\%$. We find critical heat flux in line with estimates from literature, and the time between a step in heating and the onset of film boiling follows the expected $\propto Q^{-4}$ dependence. During the first millisecond after a step in applied heating power density our measurements show a slower thermal rise time than that found by a time-dependent one-dimensional model of our setup using the steady state Kapitza heat transfer expression as the cooling boundary condition. However, the results compare favourably with transient measurements in literature. After the first millisecond, agreement between measurement and model is excellent. We do not find conclusive evidence of an orientation dependence of the Kapitza heat transfer mechanism, nor heat transfer differences that can be attributed to local surface variations along the same heater.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑