Networked control systems (NCSs) are feedback control loops that are closed over a communication network. Emerging applications, such as telerobotics, drones and autonomous driving are the most prominent examples of such systems. Regular and timely information sharing between the components of NCSs is essential to fulfill the desired control tasks, as stale information can lead to performance degradation or even physical damage. In this work, we consider multiple heterogeneous NCSs that transmit their system state over a shared physical wireless channel towards a gateway node. We conduct a comprehensive experimental study on selected MAC protocols using software-defined radios with state-of-the-art (SotA) solutions that have been designed to increase information freshness and control performance. As a significant improvement over the SotA, we propose a novel contention-free algorithm that is able to outperform the existing solutions by combining their strengths in one protocol. In addition, we propose a new metric called normalized mean squared error that maps the age of information to a dimensionless quantity that captures the expected value of a control system's next transmission. We demonstrate its adoption and effectiveness for wireless resource scheduling in a case study involving multiple inverted pendulums. From our experimental study and results, we observe that value-aware prioritization of the sub-systems contributes to minimizing the negative effects of information staleness on control performance. In particular, as the number of devices increases, the benefit of control-awareness to the quality of control stands out when compared to protocols that focus solely on maximizing information freshness.
In Networked Control Systems (NCS) impairments of the communication channel can be disruptive to stability and performance. In this paper, we consider the problem of scheduling the access to limited communication resources for a number of decoupled closed-loop systems subject to state and input constraint. The control objective is to preserve the invariance property of local state and input sets, such that constraint satisfaction can be guaranteed. Offline and online, state feedback scheduling policies are proposed and illustrated through numerical examples, also in case the network is subject…
Age of information (AoI) measures information freshness at the receiver. AoI may provide insights into quality of service in communication systems. For this reason, it has been used as a cross-layer metric for wireless communication protocols. In this work, we employ AoI to calculate penalty functions for a centralized resource scheduling problem. We consider a single wireless link shared by multiple, heterogeneous control systems where each sub-system has a time-varying packet loss probability. Sub-systems are competing for network resources to improve the accuracy of their remote estimation …
This paper deals with the design of scheduling logics for Networked Control Systems (NCSs) whose shared communication networks have limited capacity. We assume that among \(N\) plants, only \(M\:(< N)\) plants can communicate with their controllers at any time instant. We present an algorithm to allocate the network to the plants periodically such that stability of each plant is preserved. The main apparatus for our analysis is a switched systems representation of the individual plants in an NCS. We rely on multiple Lyapunov-like functions and graph-theoretic arguments to design our scheduling…
This paper deals with the design of scheduling policies for networked control systems whose shared networks have limited communication capacity and the controller to plant channels are vulnerable to jamming attacks. We assume that among N plants, only M (< N) plants can communicate with their controllers at any time instant, and the attack sequences follow an (m,k)-firm model, i.e., in any k consecutive time instants, the control inputs sent to some or all of the plants accessing the communication network, are deactivated at most at m (< k) time instants. We devise a new algorithm to allocate …
We consider the joint design of control and scheduling under stochastic Denial-of-Service (DoS) attacks in the context of networked control systems. A sensor takes measurements of the system output and forwards its dynamic state estimates to a remote controller over a packet-dropping link. The controller determines the optimal control law for the process using the estimates it receives. An attacker aims at degrading the control performance by increasing the packet-dropout rate with a DoS attack towards the sensor-controller channel. We assume both the controller and the attacker are rational i…
Joint optimization of scheduling and estimation policies is considered for a system with two sensors and two non-collocated estimators. Each sensor produces an independent and identically distributed sequence of random variables, and each estimator forms estimates of the corresponding sequence with respect to the mean-squared error sense. The data generated by the sensors is transmitted to the corresponding estimators, over a bandwidth-constrained wireless network that can support a single packet per time slot. The access to the limited communication resources is determined by a scheduler who …
This paper deals with Networked Control Systems (NCSs) whose shared networks have limited communication capacity and are prone to data losses. We assume that among (N) plants, only (M < N) plants can communicate with their controllers at any time instant. In addition, a control input, at any time instant, is lost in a channel with a probability (p). Our contributions are threefold. First, we identify necessary and sufficient conditions on the open-loop and closed-loop dynamics of the plants that ensure existence of purely time-dependent periodic scheduling sequences under which stability of ea…
We analyze the closed-loop control performance of a networked control system that consists of $N$ independent linear feedback control loops, sharing a communication network with $M$ channels ($M<N$). A centralized scheduler, employing a scheduling protocol that produces periodic communication sequences, dictates which feedback loops should utilize all these channels. Under the periodic scheduling protocol, we derive analytical expressions for quantifying the overall control performance of the networked control system in terms of a quadratic function. We also formulate the offline combinatorial…
This paper aims to provide a comprehensive critical overview on how entities and their interactions in Complex Networked Systems (CNS) are modelled across disciplines as they approach their ultimate goal of creating a Digital Twin (DT) that perfectly matches the reality. We propose a new framework to conceptually compare diverse existing modelling paradigms from different perspectives and create unified assessment criteria to assess their respective capabilities of reaching such an ultimate goal. Using the proposed criteria, we also appraise how far the reviewed current state-of-the-art approa…
Deep Learning for Wireless Networked Systems: a joint Estimation-Control-Scheduling Approach
School of Electrical and Information Engineering, The University of Sydney（悉尼大学电气与信息工程学院）；School of Electrical Engineering and Robotics, Queensland University of Technology (QUT)（昆士兰科技大学电气工程与机器人学院）
This paper proposes a cyber-physical cooperative mitigation framework to enhance power systems resilience under extreme events, e.g., earthquakes and hurricanes. Extreme events can simultaneously damage the physical-layer electric power infrastructure and the cyber-layer communication facilities. Microgrid (MG) has been widely recognised as an effective physical-layer response to such events, however, the mitigation strategy in the cyber lay is yet to be fully investigated. Therefore, this paper proposes a resilience-oriented centralised-to-decentralised framework to maintain the power supply …
In this paper, we study the trade-off between the transmission cost and the control performance of the multi-loop networked control system subject to network-induced delay. Within the linear-quadratic-Gaussian (LQG) framework, the joint design of control policy and networking strategy is decomposed into separation optimization problems. Based on the trade-off analysis, a scalable, delay-dependent Value-of-Information (VoI) based scheduling policy is constructed to quantify the value of transmitting the data packet, and enables the decision-makers embedded in subsystems to determine the transmi…
This paper studies the tracking control problem of nonlinear networked and quantized control systems (NQCSs) with communication delays. The desired trajectory is generated by a reference system. The communication network is to guarantee the information transmission among the plant, the reference system and the controller. The communication network also brings about some undesired issues like time-varying transmission intervals, time-varying transmission delays, packet dropouts, scheduling and quantization effects, which lead to non-vanishing network-induced errors and affect the tracking perfo…
Extreme circumstances in which a local distribution system is electrically isolated from the main power supply may not always be avoidable. Efforts must be made to keep the lights on for such an isolated distribution system (IDS) until reconnection to the main power source. In this paper, we propose a strategy to enhance IDS survivability utilizing the coordination of two flexible approaches, namely, separable energy storage systems (SMESSs), which construct non-wires links for energy transmission between the IDS and the external live power sources, and demand response (DR), which adjusts the …
Goal-Oriented Sensor Reporting Scheduling for Non-linear Dynamic System Monitoring
Centre for Wireless Communications, University of Oulu（奥卢大学无线通信中心）；Department of Electrical Engineering, Indian Institute of Technology Indore（印度印多尔理工学院电气工程系）；Skoda Auto University（斯柯达汽车大学）；Faculty of Informatics and Management, University of Hradec Krolove（赫拉德茨克拉洛韦大学信息与管理学院）；University of Oulu（奥卢大学）
This paper treats an optimal scheduling problem of control nodes in networked systems. We newly introduce both the L0 and l0 constraints on control inputs to extract a time-varying small number of effective control nodes. As the cost function, we adopt the trace of the controllability Gramian to reduce the required control energy. Since the formulated optimization problem is combinatorial, we introduce a convex relaxation problem for its computational tractability. After a reformulation of the problem into an optimal control problem to which Pontryagin's maximum principle is applicable, we giv…
Recent works in the domain of networked control systems have demonstrated that the joint design of medium access control strategies and control strategies for the closed-loop system is beneficial. However, several metrics introduced so far fail in either appropriately representing the network requirements or in capturing how valuable the data is. In this paper we propose a distributed value of information (dVoI) metric for the joint design of control and schedulers for medium access in a multi-loop system and multi-hop network. We start by providing conditions under certainty equivalent contro…
Networked control system (NCS) refer to a set of control loops that are closed over a communication network. In this article, the joint operation of control and networking for NCS is investigated wherein the network serves the sensor-to-controller communication links for multiple stochastic linear time-invariant (LTI) sub-systems. The sensors sample packets based on the observed plant state, which they send over a shared multi-hop network. The network has limited communication resources, which need to be assigned to competing links to support proper control loop operation. In this set-up, we f…
Communication-Control Codesign for Large-Scale Wireless Networked Control Systems
School of Electrical and Computer Engineering, The University of Sydney（悉尼大学电气与计算机工程学院）；College of Computing and Data Science, Nanyang Technological University（南洋理工大学计算与数据科学学院）
This paper addresses the problem of modeling and scheduling the transmissions generated by multiple event-triggered control (ETC) loops sharing a network. We present a method to build a symbolic traffic model of periodic ETC (PETC), which by construction provides an exact simulation of such traffic. The model is made in such a way as to avoid the combinatorial explosion that is typical of symbolic models in many applications. It is augmented with early triggering actions that can be used by a scheduler to mitigate communication conflicts. The complete networked control system is then modeled a…
Rollout approaches are an effective tool to address the problem of co-designing the transmission schedule and the corresponding input values, when the controller is connected to the plant via a resource-constrained communication network. These approaches typically employ an MPC, activated at multiples of the period length of a base transmission schedule. Using multi-step invariant terminal regions and a prediction horizon longer than the base period, stability can be ensured. This strategy, however, suffers from intrinsic shortcomings, such as a high computational complexity and low robustness…
In this paper, we consider a discrete-time multi-agent system involving $N$ cost-coupled networked rational agents solving a consensus problem and a central Base Station (BS), scheduling agent communications over a network. Due to a hard bandwidth constraint on the number of transmissions through the network, at most $R_d < N$ agents can concurrently access their state information through the network. Under standard assumptions on the information structure of the agents and the BS, we first show that the control actions of the agents are free of any dual effect, allowing for separation between…
A Passivity-Based Design for Stability and Robustness in Event-Triggered Networked Control Systems with Communication Delays, Signal Quantizations and Packet Dropouts
Unmanned aerial vehicle (UAV)-enabled positioning that uses UAVs as aerial anchor nodes is a promising solution for providing positioning services in harsh environments. In previous research, the state sensing and control of UAVs were either ignored or simply set to be performed continuously, resulting in system instability or waste of wireless resources. Therefore, in this article, we propose a quality-of-service (QoS)-oriented UAV-enabled positioning system based on the concept of sensing-communication-control (SCC) co-design. We first establish the mathematical models of UAV state sensing a…
