Transfer learning is a proven technique in 2D computer vision to leverage the large amount of data available and achieve high performance with datasets limited in size due to the cost of acquisition or annotation. In 3D, annotation is known to be a costly task; nevertheless, pre-training methods have only recently been investigated. Due to this cost, unsupervised pre-training has been heavily favored. In this work, we tackle the case of real-time 3D semantic segmentation of sparse autonomous driving LiDAR scans. Such datasets have been increasingly released, but each has a unique label set. We propose here an intermediate-level label set called coarse labels, which can easily be used on any existing and future autonomous driving datasets, thus allowing all the data available to be leveraged at once without any additional manual labeling. This way, we have access to a larger dataset, alongside a simple task of semantic segmentation. With it, we introduce a new pre-training task: coarse label pre-training, also called COLA. We thoroughly analyze the impact of COLA on various datasets and architectures and show that it yields a noticeable performance improvement, especially when only a small dataset is available for the finetuning task.
COLA: COarse-LAbel multi-source LiDAR semantic segmentation for autonomous driving
Centre of Robotics, Mines Paris - PSL, PSL University（巴黎矿业-PSL大学机器人中心，PSL大学）；U2IS, ENSTA Paris, Institut Polytechnique de Paris（巴黎综合理工学院U2IS，巴黎ENSTA学院）
Lidar became an important component of the perception systems in autonomous driving. But challenges of training data acquisition and annotation made emphasized the role of the sensor to sensor domain adaptation. In this work, we address the problem of lidar upsampling. Learning on lidar point clouds is rather a challenging task due to their irregular and sparse structure. Here we propose a method for lidar point cloud upsampling which can reconstruct fine-grained lidar scan patterns. The key idea is to utilize edge-aware dense convolutions for both feature extraction and feature expansion. Add…
SN-LiDAR: Semantic Neural Fields for Novel Space-time View LiDAR Synthesis
Shanghai Jiao Tong University（上海交通大学）；Ruijin Hospital, Shanghai Jiao Tong University School of Medicine（上海交通大学医学院附属瑞金医院）；Renji Hospital, Shanghai Jiao Tong University School of Medicine（上海交通大学医学院附属仁济医院）
For autonomous vehicles, an accurate calibration for LiDAR and camera is a prerequisite for multi-sensor perception systems. However, existing calibration techniques require either a complicated setting with various calibration targets, or an initial calibration provided beforehand, which greatly impedes their applicability in large-scale autonomous vehicle deployment. To tackle these issues, we propose a novel method to calibrate the extrinsic parameter for LiDAR and camera in road scenes. Our method introduces line features from static straight-line-shaped objects such as road lanes and pole…
The Hong Kong University of Science and Technology (Guangzhou)（香港科技大学（广州））；Hong Kong University of Science and Technology（香港科技大学）；HKUST Shenzhen-Hong Kong Collaborative Innovation Research Institute（香港科技大学深港协同创新研究院）；CWB Institute of Autonomous Driving（CWB自动驾驶研究院）
The combination of LiDARs and cameras enables a mobile robot to perceive environments with multi-modal data, becoming a key factor in achieving robust perception. Traditional frame cameras are sensitive to changing illumination conditions, motivating us to introduce novel event cameras to make LiDAR-camera fusion more complete and robust. However, to jointly exploit these sensors, the challenging extrinsic calibration problem should be addressed. This paper proposes an automatic checkerboard-based approach to calibrate extrinsics between a LiDAR and a frame/event camera, where four contributio…
DATA61, CSIRO（联邦科学与工业研究组织数据61研究所）；Queensland University of Technology (QUT)（昆士兰科技大学）；Sun Moon University（鲜文大学）
The demand for multimodal sensing systems for robotics is growing due to the increase in robustness, reliability and accuracy offered by these systems. These systems also need to be spatially and temporally co-registered to be effective. In this paper, we propose a targetless and structureless spatiotemporal camera-LiDAR calibration method. Our method combines a closed-form solution with a modified structureless bundle adjustment where the coarse-to-fine approach does not {require} an initial guess on the spatiotemporal parameters. Also, as 3D features (structure) are calculated from triangula…
LiDARs are usually more accurate than cameras in distance measuring. Hence, there is strong interest to apply LiDARs in autonomous driving. Different existing approaches process the rich 3D point clouds for object detection, tracking and recognition. These methods generally require two initial steps: (1) filter points on the ground plane and (2) cluster non-ground points into objects. This paper proposes a field-tested fast 3D point cloud segmentation method for these two steps. Our specially designed algorithms allow instantly process raw LiDAR data packets, which significantly reduce the pro…
TransUPR: A Transformer-based Uncertain Point Refiner for LiDAR Point Cloud Semantic Segmentation
Arizona State University（亚利桑那州立大学）；U.S. DEVCOM Army Research Laboratory（美国作战能力发展司令部陆军研究实验室）；U.S. DEVCOM Army C5ISR Center（美国作战能力发展司令部陆军指挥、控制、通信、计算机、网络、情报、监视和侦察中心）
Huazhong University of Science and Technology（华中科技大学）；SenseTime Research（商汤科技研究院）；Chinese University of Hong Kong（香港中文大学）
Camera and 3D LiDAR sensors have become indispensable devices in modern autonomous driving vehicles, where the camera provides the fine-grained texture, color information in 2D space and LiDAR captures more precise and farther-away distance measurements of the surrounding environments. The complementary information from these two sensors makes the two-modality fusion be a desired option. However, two major issues of the fusion between camera and LiDAR hinder its performance, \ie, how to effectively fuse these two modalities and how to precisely align them (suffering from the weak spatiotempora…
Multi-LiCa: A Motion and Targetless Multi LiDAR-to-LiDAR Calibration Framework
Institute of Automotive Technology（汽车技术研究所）；Munich Institute of Robotics and Machine Intelligence (MIRMI)（慕尼黑机器人与智能机械研究所）；Technical University of Munich（慕尼黑技术大学）
We propose Super Odometry, a high-precision multi-modal sensor fusion framework, providing a simple but effective way to fuse multiple sensors such as LiDAR, camera, and IMU sensors and achieve robust state estimation in perceptually-degraded environments. Different from traditional sensor-fusion methods, Super Odometry employs an IMU-centric data processing pipeline, which combines the advantages of loosely coupled methods with tightly coupled methods and recovers motion in a coarse-to-fine manner. The proposed framework is composed of three parts: IMU odometry, visual-inertial odometry, and …
Rutgers, The State University of New Jersey（罗格斯大学，新泽西州立大学）
In this paper, we developed the solution of roadside LiDAR object detection using a combination of two unsupervised learning algorithms. The 3D point clouds are firstly converted into spherical coordinates and filled into the elevation-azimuth matrix using a hash function. After that, the raw LiDAR data were rearranged into new data structures to store the information of range, azimuth, and intensity. Then, the Dynamic Mode Decomposition method is applied to decompose the LiDAR data into low-rank backgrounds and sparse foregrounds based on intensity channel pattern recognition. The Coarse Fine…
LiDAR-VGGT: Cross-Modal Coarse-to-Fine Fusion for Globally Consistent and Metric-Scale Dense Mapping
State Key Laboratory of Industrial Control Technology, Institute of Cyber-Systems and Control, Zhejiang University（工业控制技术国家重点实验室，系统与控制研究院，浙江大学）；Differential Robot Technology Co., Ltd.（差分机器人技术有限公司）；College of Intelligence Science and Technology, National University of Defense Technology（智能科学与技术学院，国防科技大学）
Monocular camera sensors are vital to intelligent vehicle operation and automated driving assistance and are also heavily employed in traffic control infrastructure. Calibrating the monocular camera, though, is time-consuming and often requires significant manual intervention. In this work, we present an extrinsic camera calibration approach that automatizes the parameter estimation by utilizing semantic segmentation information from images and point clouds. Our approach relies on a coarse initial measurement of the camera pose and builds on lidar sensors mounted on a vehicle with high-precisi…
Université Cote d’Azur（蔚蓝海岸大学）；NAPA-Technologies（NAPA技术公司）；Université Côte d’Azur（蔚蓝海岸大学）；University of Glasgow（格拉斯哥大学）；Sant’Anna School of Advanced Studies（圣安娜高等研究学院）
Deploying advanced imaging solutions to robotic and autonomous systems by mimicking human vision requires simultaneous acquisition of multiple fields of views, named the peripheral and fovea regions. Low-resolution peripheral field provides coarse scene exploration to direct the eye to focus to a highly resolved fovea region for sharp imaging. Among 3D computer vision techniques, Light Detection and Ranging (LiDAR) is currently considered at the industrial level for robotic vision. LiDAR is an imaging technique that monitors pulses of light at optical frequencies to sense the space and to reco…
A key challenge for LiDAR-based 3D object detection is to capture sufficient features from large scale 3D scenes especially for distant or/and occluded objects. Albeit recent efforts made by Transformers with the long sequence modeling capability, they fail to properly balance the accuracy and efficiency, suffering from inadequate receptive fields or coarse-grained holistic correlations. In this paper, we propose an Octree-based Transformer, named OcTr, to address this issue. It first constructs a dynamic octree on the hierarchical feature pyramid through conducting self-attention on the top l…
Applications based on synergistic integration of optical imagery and LiDAR data are receiving a growing interest from the remote sensing community. However, a misaligned integration between these datasets may fail to fully profit the potential of both sensors. In this regard, an optimum fusion of optical imagery and LiDAR data requires an accurate registration. This is a complex problem since a versatile solution is still missing, especially when considering the context where data are collected at different times, from different platforms, under different acquisition configurations. This paper…
Poznan University of Technology（波兹南理工大学）；Warsaw University of Technology（华沙理工大学）
The 3D LiDAR place recognition aims to estimate a coarse localization in a previously seen environment based on a single scan from a rotating 3D LiDAR sensor. The existing solutions to this problem include hand-crafted point cloud descriptors (e.g., ScanContext, M2DP, LiDAR IRIS) and deep learning-based solutions (e.g., PointNetVLAD, PCAN, LPDNet, DAGC, MinkLoc3D), which are often only evaluated on accumulated 2D scans from the Oxford RobotCar dataset. We introduce MinkLoc3D-SI, a sparse convolution-based solution that utilizes spherical coordinates of 3D points and processes the intensity of …
Accurate moving object segmentation is an essential task for autonomous driving. It can provide effective information for many downstream tasks, such as collision avoidance, path planning, and static map construction. How to effectively exploit the spatial-temporal information is a critical question for 3D LiDAR moving object segmentation (LiDAR-MOS). In this work, we propose a novel deep neural network exploiting both spatial-temporal information and different representation modalities of LiDAR scans to improve LiDAR-MOS performance. Specifically, we first use a range image-based dual-branch …
University of Technology Sydney（悉尼科技大学）；Nokia Technologies（诺基亚科技）；Tsinghua University（清华大学）
With the development of numerous 3D sensing technologies, object registration on cross-source point cloud has aroused researchers' interests. When the point clouds are captured from different kinds of sensors, there are large and different kinds of variations. In this study, we address an even more challenging case in which the differently-source point clouds are acquired from a real street view. One is produced directly by the LiDAR system and the other is generated by using VSFM software on image sequence captured from RGB cameras. When it confronts to large scale point clouds, previous meth…
CrossTracker: Robust Multi-modal 3D Multi-Object Tracking via Cross Correction
School of Computer Science and Technology, Nanjing University of Aeronautics and Astronautics（南京航空航天大学计算机科学与技术学院）；Collaborative Innovation Center of Novel Software Technology and Industrialization（新型软件技术与产业化协同创新中心）；School of Science and Technology, Hong Kong Metropolitan University（香港都会大学科技学院）；School of Computer Science, Jiangsu University of Technology（江苏理工学院计算机学院）；Delft University of Technology（代尔夫特理工大学）
In this paper, we present a case study that performs an unmanned aerial vehicle (UAV) based fine-scale 3D change detection and monitoring of progressive collapse performance of a building during a demolition event. Multi-temporal oblique photogrammetry images are collected with 3D point clouds generated at different stages of the demolition. The geometric accuracy of the generated point clouds has been evaluated against both airborne and terrestrial LiDAR point clouds, achieving an average distance of 12 cm and 16 cm for roof and facade respectively. We propose a hierarchical volumetric change…
Beijing Jiaotong University（北京交通大学）；Beijing Key Laboratory of Advanced Information Science and Network Technology（北京市先进信息科学与网络技术重点实验室）
LiDAR sensors are widely used in autonomous driving due to the reliable 3D spatial information. However, the data of LiDAR is sparse and the frequency of LiDAR is lower than that of cameras. To generate denser point clouds spatially and temporally, we propose the first future pseudo-LiDAR frame prediction network. Given the consecutive sparse depth maps and RGB images, we first predict a future dense depth map based on dynamic motion information coarsely. To eliminate the errors of optical flow estimation, an inter-frame aggregation module is proposed to fuse the warped depth maps with adaptiv…
This paper addresses the task of separating ground points from airborne LiDAR point cloud data in urban areas. A novel ground filtering method using scan line segmentation is proposed here, which we call SLSGF. It utilizes the scan line information in LiDAR data to segment the LiDAR data. The similarity measurements are designed to make it possible to segment complex roof structures into a single segment as much as possible so the topological relationships between the roof and the ground are simpler, which will benefit the labeling process. In the labeling process, the initial ground segments …
Offboard Occupancy Refinement with Hybrid Propagation for Autonomous Driving
State Key Laboratory of Extreme Photonics and Instrumentation and the National Engineering Research Center of Optical Instrumentation（极端光物理与仪器国家重点实验室和光学仪器国家工程研究中心）；National Engineering Research Center of Optical Instrumentation（光学仪器国家工程研究中心）；College of Computer Science and Technology（计算机科学与技术学院）；Institute for Anthropomatics and Robotics（人机一体化机器人研究所）；Department of Engineering（工程系）
Uber Advanced Technologies Group（优步先进技术集团）；University of Waterloo（滑铁卢大学）；University of Toronto（多伦多大学）
We present a novel compression algorithm for reducing the storage of LiDAR sensor data streams. Our model exploits spatio-temporal relationships across multiple LiDAR sweeps to reduce the bitrate of both geometry and intensity values. Towards this goal, we propose a novel conditional entropy model that models the probabilities of the octree symbols by considering both coarse level geometry and previous sweeps' geometric and intensity information. We then use the learned probability to encode the full data stream into a compact one. Our experiments demonstrate that our method significantly redu…
Urban GeoBIM construction by integrating semantic LiDAR point clouds with as-designed BIM models
The Hong Kong Polytechnic University（香港理工大学）；The Hong Kong Polytechnic University Shenzhen Research Institute（香港理工大学深圳研究院）；Otto Poon Charitable Foundation Smart Cities Research Institute, The Hong Kong Polytechnic University（香港理工大学潘乐陶慈善基金会智慧城市研究院）；Aerospace Information Research Institute, Chinese Academy of Sciences（中国科学院空天信息创新研究院）
SenseTime Research（商汤科技研究院）；The Chinese University of Hong Kong（香港中文大学）；Zhejiang University（浙江大学）
Depth completion aims to recover dense depth maps from sparse depth measurements. It is of increasing importance for autonomous driving and draws increasing attention from the vision community. Most of existing methods directly train a network to learn a mapping from sparse depth inputs to dense depth maps, which has difficulties in utilizing the 3D geometric constraints and handling the practical sensor noises. In this paper, to regularize the depth completion and improve the robustness against noise, we propose a unified CNN framework that 1) models the geometric constraints between depth an…
Northwestern Polytechnical University（西北工业大学）；Université Sorbonne Paris Nord（索邦巴黎北大学）；Xidian University（西安电子科技大学）
To benefit the complementary information between heterogeneous data, we introduce a new Multimodal Transformer (MMFormer) for Remote Sensing (RS) image classification using Hyperspectral Image (HSI) accompanied by another source of data such as Light Detection and Ranging (LiDAR). Compared with traditional Vision Transformer (ViT) lacking inductive biases of convolutions, we first introduce convolutional layers to our MMFormer to tokenize patches from multimodal data of HSI and LiDAR. Then we propose a Multi-scale Multi-head Self-Attention (MSMHSA) module to address the problem of compatibilit…
AlignMiF: Geometry-Aligned Multimodal Implicit Field for LiDAR-Camera Joint Synthesis
Shenzhen Campus of Sun Yat-sen University（中山大学深圳校区）；DarkMatter AI Research（DarkMatter AI研究）；University of Oxford（牛津大学）；HKU（香港大学）；Cainiao Group（菜鸟集团）；NCUT（北方工业大学）；Sun Yat-sen University（中山大学）；Westlake University（西湖大学）
Hefei Institutes of Physical Science, Chinese Academy of Sciences（中国科学院合肥物质科学研究院）；University of Science and Technology（科技大学）；Anhui Engineering Laboratory for Intelligent Driving Technology and Application（安徽省智能驾驶技术与应用工程实验室）；Innovation Research Institute of Robotics and Intelligent Manufacturing Chinese Academy of Sciences（中国科学院机器人与智能制造创新研究院）
Ground segmentation is an important preprocessing task for autonomous vehicles (AVs) with 3D LiDARs. To solve the problem of existing ground segmentation methods being very difficult to balance accuracy and computational complexity, a fast point cloud ground segmentation approach based on a coarse-to-fine Markov random field (MRF) method is proposed. The method uses an improved elevation map for ground coarse segmentation, and then uses spatiotemporal adjacent points to optimize the segmentation results. The processed point cloud is classified into high-confidence obstacle points, ground point…
PRI-Net: A Lightweight Multimodal Framework for 3D UAV Localization
College of Information Science and Electronic Engineering, Zhejiang University（浙江大学信息与电子工程学院）；Zhejiang Key Laboratory of Multimodal Communication Networks and Intelligent Information Processing（浙江省多模态通信网络与智能信息处理重点实验室）
ONERA, The French Aerospace Lab（法国航空航天研究院）；Univ. Bretagne-Sud, UMR 6074, IRISA（南布列塔尼大学，IRISA）
In this work, we investigate the use of OpenStreetMap data for semantic labeling of Earth Observation images. Deep neural networks have been used in the past for remote sensing data classification from various sensors, including multispectral, hyperspectral, SAR and LiDAR data. While OpenStreetMap has already been used as ground truth data for training such networks, this abundant data source remains rarely exploited as an input information layer. In this paper, we study different use cases and deep network architectures to leverage OpenStreetMap data for semantic labeling of aerial and satell…
LoFi: Vision-Aided Label Generator for Wi-Fi Localization and Tracking
Shenzhen Research Institute of Big Data（深圳大数据研究院）；School of Computer Science and Engineering, Sun Yat-sen University（中山大学计算机科学与工程学院）；School of Science and Engineering, The Chinese University of Hong Kong, Shenzhen（香港中文大学（深圳）科学与工程学院）
GLObal Building heights for Urban Studies (UT-GLOBUS) for city- and street- scale urban simulations: Development and first applications
University of Texas at Austin（德克萨斯大学奥斯汀分校）；Indian Institute of Tropical Meteorology（印度热带气象研究所）；CIEMAT（西班牙国家研究中心（能源、环境与技术研究中心））；Purdue University（普渡大学）；National Center for Atmospheric Research（美国国家大气研究中心）
