arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2202.04255cond-mat.softphysics.flu-dyn
收藏

叶片-杯流变仪夹具中屈服和粘塑性流动的计算流变测量

Computational Rheometry of Yielding and Viscoplastic Flow in Vane-and-Cup Rheometer Fixtures

Emad Chaparian, Crystal E. Owens, Gareth H. McKinley

摘要:

一个平面的二维计算分析,以符合传统的和分形的杯形叶片的几何形状,简单的粘塑性流体的准确的流变仪和无滑移。基于自适应增广拉格朗日格式的数值模拟被用来研究在宽范围的宾汉数B(即屈服应力与特征粘性应力的比率)下,N=3至24个臂的叶片工具内和周围的屈服应力流体的二维流场。这允许精确计算具有各种几何形状的叶片周围的速度和应力场,以及直接与流变仪测量的输出扭矩的实验观察结果进行比较,揭示变化和误差的来源。我们描述了叶片结构对流体速度场的影响,从显著扰动远离理想方位运动学的流的少臂十字形叶片(N < 6)到内部结构特征被屈服面成功“掩盖”的多臂分形叶片(N > 12)。这导致粘塑性流体的几乎圆形环的剪切,其与围绕无滑动旋转圆柱形摆锤变形的流体的环形环不可区分,并且导致材料流动曲线的更精确的流变测量。此外,在直接与以前的文献中的数据进行比较,我们表明,叶片表面上的滑动条件不影响速度场或测量的总扭矩T,而光滑的外壁上的滑动条件对数据有显着的影响,即使使用叶片的几何形状。最后,我们描述的影响叶片地形和宾厄姆数,B,上测得的扭矩和流变精度的杯形叶片的几何形状为“简单”(非弹性)屈服应力流体描述的宾厄姆塑料或赫歇尔-Bulkley本构模型。

英文摘要:

A planar two-dimensional computational analysis is presented to qualify traditional and fractal vane-in-cup geometries for accurate rheometry of simple viscoplastic fluids with and without slip. Numerical simulations based on an adaptive augmented Lagrangian scheme are used to study the two-dimensional flow field of yield-stress fluids within and around vane tools with N=3 to 24 arms for a wide range of Bingham numbers, B (i.e. the ratio of the yield stress over the characteristic viscous stress). This allows for accurate calculations of the velocity and stress fields around vanes with various geometries, as well as direct comparison to experimental observations of the output torque measured by a rheometer, revealing sources of variation and error. We describe the impact of the vane structure on the fluid velocity field, from few-arm cruciform vanes (N < 6) that significantly perturb the flow away from ideal azimuthal kinematics, to many-arm fractal vanes (N > 12) in which the internal structural features are successfully ``cloaked" by a yield surface. This results in the shearing of an almost-circular ring of viscoplastic fluid that is indistinguishable from the annular ring of fluid deformed around a slip-free rotating cylindrical bob and leads to more accurate rheometric measurements of the material flow curve. Moreover, in direct comparison with data from previous literature, we show that slip conditions on the vane surface do not impact the velocity field or measured overall torque T, whereas slip conditions on the smooth outer wall have significant impact on data, even when using a vane geometry. Finally, we describe the impact of vane topography and Bingham number, B, on the measured torque and rheometric accuracy of vane-in-cup geometries for ``simple" (inelastic) yield-stress fluids described by either the Bingham plastic or Herschel-Bulkley constitutive model.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑