Since the advent of optical orbital angular momentum (OAM), advances in the generation and manipulation of OAM beams have continuously impacted on intriguing applications including optical communication, optical tweezers, and remote sensing. To realize the generation of high-power and fast switchable OAM beams, coherent combining of fiber lasers offers a promising way. Here in this contribution, we comprehensively investigate the coherent fiber laser array system for structuring OAM beams in terms of the design considerations and performance analysis. The performance metric and evaluation method of the laser array system are presented and introduced. Accordingly, the effect of the main sections of the laser array system, namely the high-power laser sources, emitting array configuration, and dynamic control system, on the performance of the output coherently combined OAM beams is evaluated, which reveals the system tolerance of perturbative factors and provides the guidance on system design and optimization. This work could provide beneficial reference on the practical implementation of spatially structuring high-power, fast switchable OAM beams with fiber laser arrays.
We study the class of endlessly single-mode all-silica photonic crystal fibers with a triangular air-hole cladding. We consider the sensibility to longitudinal nonuniformities and the consequences and limitations for realizing low-loss large-mode area photonic crystal fibers. We also discuss the dominating scattering mechanism and experimentally we confirm that both macro and micro-bending can be the limiting factor.
We explore the practical challenges which should be addressed when designing a multi-core fiber coupler for nonlinear switching or mode-locking applications. The inevitable geometric imperfections formed in these fiber couplers during the fabrication process affect the performance characteristics of the nonlinear switching device. Fabrication uncertainties are tolerable as long as the changes they impose on the propagation constant of the modes are smaller than the linear coupling between the cores. It is possible to reduce the effect of the propagation constant variations by bringing the core…
Coherent ultraviolet (UV) light has many uses, for example in the study of molecular species relevant in biology and chemistry. Very few if any laser materials offer UV transparency along with damage-free operation at high photon energies and laser power. Here we report efficient generation of deep and vacuum UV light using hydrogen-filled hollow-core photonic crystal fiber (HC-PCF). Pumping above the stimulated Raman threshold at 532 nm, coherent molecular vibrations are excited in the gas, permitting highly efficient thresholdless wavelength conversion in the UV. The system is uniquely press…
The 3D nano-structuring on the <10nm scale allows the refractive index of functional sensory materials(n>2) to be reduced and matched with the cladding of optical fiber(n~1.46) for low-loss integration. A high temperature capable hydrogen sensor composed of D-shaped optical fiber with palladium nanoparticles infused nanoporous (~5nm) TiO2 film is demonstrated. The behavior of the developed sensor was characterized by examining the wavelength of an incorporated Fiber Bragg Grating and by observing the transmission losses at temperatures up to 700C. In addition, with frequency domain reflectomet…
We predict and experimentally observe a nonlinear variant of stimulated Brillouin scattering in a single-mode fiber that arises from consideration of higher-order processes for phonon generation. The effect manifests itself at high laser excitation as the appearance of Stokes gain for a detuning equal to half of the conventional Brillouin frequency in the fiber, with no accompanying anti-Stokes absorption at the opposite detuning, and requires counter-propagating pump beams for phase-matching. We believe that this could be a new nonlinear optical effect that has not been observed before.
In this work, a numerical modal decomposition approach is applied to model the optical field of laser light after propagating through a highly multi-mode fiber. The algorithm for the decomposition is based on the reconstruction of measured intensity profiles along the laser beam caustic with consideration of intermodal degrees of coherence derived from spectral analysis. To enhance the accuracy of the model, different approaches and strategies are applied and discussed. The presented decomposition into a set of LP modes enables both the wave-optical simulation of radiation transport by highly …
The non-reciprocity of Sagnac interferometer provides ultra-high sensitivity for parameter estimation and offers a wide range of applications, especially for optical fiber sensing. In this work, we study a new type of non-reciprocity existed in optical fiber Sagnac interferometer where the polarization dependent loss is taken into consideration. In particular, this non-reciprocity is irrelevant to the physical effects that being considered in previous studies, which originates from the geometric phases induced by continuous-weak-measurement. In consequence, it has a unique phenomenon of sudden…
We present detailed studies of the effect of polarization on thermal-induced mode instability (MI) in ytterbium-doped fiber amplifiers. Based on a steady-state theoretical model, which takes both electric fields along the two principal axes into consideration, the effect of polarization effects on the gain of Stokes wave was analyzed, which shows that the polarization characteristics of the fiber laser have no impact on the threshold of MI. Experimental validation of the theoretical analysis is presented with experimental results agreeing well with the theoretical results, in which polarizatio…
We present a flexible all-polarization-maintaining (PM) mode-locked ytterbium (Yb):fiber laser based on a nonlinear amplifying loop mirror (NALM). In addition to providing detailed design considerations, we discuss the different operation regimes accessible by this versatile laser architecture and experimentally analyze five representative mode-locking states. These five states were obtained in a 78-MHz configuration at different intracavity group delay dispersion (GDD) values ranging from anomalous (-0.035 ps$^2$) to normal (+0.015 ps$^2$). We put a particular focus on the characterization of…
We shortly recall the mathematical and physical aspects of Talbot's self-imaging effect occurring in near-field diffraction. In the rational paraxial approximation, the Talbot images are formed at distances z=p/q, where p and q are coprimes, and are superpositions of q equally spaced images of the original binary transmission (Ronchi) grating. This interpretation offers the possibility to express the Talbot effect through Gauss sums. Here, we pay attention to the Talbot effect in the case of dispersion in optical fibers presenting our considerations based on the close relationships of the math…
We stabilized the frequency of a compact planar-waveguide external cavity laser (ECL) on a Fabry-Pérot cavity (FPC) through a Pound-Drever-Hall scheme. The residual frequency stability of the ECL is 1E-14, comparable to the stability achievable with a fiber laser (FL) locked to a FPC through the same scheme. We set up an optical link of 100 km, based on fiber spools, that reaches 1E-19 relative stability, and we show that its performances using the ECL or FL are comparable. Thus ECLs could serve as an excellent replacement for FLs in optical links where cost-effectiveness and robustness are im…
Wave modes induced by cross-phase reshaping of a probe photon in the guiding structure of a periodic train of temporal pulses are investigated theoretically with emphasis on exact solutions to the wave equation for the probe. The study has direct connection with recent advances on the issue of light control by light, the focus being on the trapping of a low-power probe by a temporal sequence of periodically matched high-power pulses of a dispersion-managed optical fiber. The problem is formulated in terms of the nonlinear optical fiber equation with averaged dispersion, coupled to a linear equ…
Analysis of graded-index optical fibers by the spectral parameter power series method
SEPI, ESIME Zacatenco, Instituto Politécnico Nacional（墨西哥国立理工学院， Zacatenco 高等工业教育学院）；Departamento de Matemáticas, CINVESTAV del IPN, Unidad Querétaro（墨西哥国立理工学院下属的研究与高级研究中心，克雷塔罗校区，数学系）
We present an ultrahigh-$Q$, solid-silica microrod resonator operated under ambient conditions that supports laser-fractional-frequency stabilization to the thermal-noise limit of $3 \times 10^{-13}$ and a linewidth of 62 Hz. We characterize the technical-noise mechanisms for laser stabilization, which contribute significantly less than thermal noise. With fiber photonics, we generate optical and microwave reference signals provided by the microrod modes and the free-spectral range, respectively. Our results suggest the future physical considerations for a miniature, low noise, and robust opti…
Implementing optical-frequency combs with integrated photonics will enable wider use of precision timing signals.Here, we explore the generation of an octave-span, Kerr-microresonator frequency comb, using hybrid integration ofan InP distributed-feedback laser and a SiN photonic-integrated circuit. We demonstrate electrically pumped and fiber-packaged prototype systems, enabled by self-injection locking. This direct integration of a laser and a microresonatorcircuit without previously used intervening elements, like optical modulators and isolators, necessitates understand-ing self-injection-l…
