The buoyancy-driven dynamics of a pair of gas bubbles released in line is investigated numerically, focusing on highly inertial conditions under which isolated bubbles follow non-straight paths. In an early stage, the second bubble always drifts out of the wake of the leading one. Then, depending on the ratios of the buoyancy, viscous and capillary forces which define the Galilei ($Ga$) and Bond ($Bo$) numbers of the system, five distinct regimes specific to such conditions are identified, in which the two bubbles may rise independently or continue to interact and possibly collide in the end. In the former case, they usually perform large-amplitude planar zigzags within the same plane or within two distinct planes, depending on the oblateness of the leading bubble. However, for large enough $Ga$ and low enough $Bo$, they follow nearly vertical paths with small-amplitude erratic horizontal deviations. Increasing $Bo$ makes the wake-induced attraction toward the leading bubble stronger, forcing the two bubbles to realign vertically one or more times along their ascent. During such sequences, wake vortices may hit the trailing bubble, deflecting its path and, depending on the case, promoting or hindering further possibilities of interaction. In some regimes, varying the initial distance separating the two bubbles modifies their lateral separation beyond the initial stage. Similarly, minute initial angular deviations favour the selection of a single vertical plane of rise common to both bubbles. These changes may dramatically affect the fate of the tandem as, depending on $Bo$, they promote or prevent future vertical realignments.
We investigate the clustering morphology of a swarm of freely rising deformable bubbles. A three-dimensional Voronoï analysis enables us to quantitatively distinguish between two typical clustering configurations: preferential clustering and a grid-like structure. The bubble data is obtained from direct numerical simulations (DNS) using the front-tracking method. It is found that the bubble deformation, represented by the aspect ratio χ, plays a significant role in determining which type of clustering is realized: Nearly spherical bubbles with χ<~ 1.015 form a grid-like structure, while more d…
Inertial migration of deformable particles has become appealing in recent years due to its numerous applications in microfluidics and biomedicine. The physics underlying the motion of such particles is contingent upon the presence of lift forces in microchannels. This importance initiated several works to analyze and quantify such forces acting on particles. However, since most of such attempts have focused on solid and non-deformable particles, we extend the lift force analysis for the case of deformable droplets and study the effects of Capillary numbers on their dynamics in this paper. Furt…
We perform fully Eulerian numerical simulations of an initially spherical hyperelastic particle suspended in a Newtonian pressure-driven flow in a cylindrical straight pipe. We study the full particle migration and deformation for different Reynolds numbers and for various levels of particle elasticity, to disentangle the interplay of inertia and elasticity on the particle focusing. We observe that the particle deforms and undergoes a lateral displacement while traveling downstream through the pipe, finally focusing at the pipe centerline. We note that the migration dynamics and the final equi…
The buoyancy-driven motion of two identical gas bubbles released in line in a liquid at rest is examined with the help of highly resolved simulations, focusing on moderately inertial regimes in which the path of an isolated bubble is vertical. Assuming first an axisymmetric evolution, equilibrium configurations of the bubble pair are determined as a function of the buoyancy-to-viscous and buoyancy-to-capillary force ratios which define the Galilei ($Ga$) and Bond ($Bo$) numbers of the system, respectively. The three-dimensional solutions reveal that this axisymmetric equilibrium is actually ne…
Dynamics of a deformable capsule in an oscillatory flow of a Newtonian fluid in a microchannel has been studied numerically. The effects of oscillation frequency, capsule deformability, and channel flow rate have been explored by simulating the capsule within a microchannel. In addition, the simulation captures the effect of the type of imposed pressure oscillations on the migration pattern of the capsule. An oscillatory channel flow enables the focusing of extremely small biological particles by eliminating the need to design impractically long channels. The presented results show that the eq…
The mechanical deformability of single cells is an important indicator for various diseases such as cancer, blood diseases and inflammation. Lab-on-a-chip devices allow to separate such cells from healthy cells using hydrodynamic forces. We perform hydrodynamic simulations based on the lattice-Boltzmann method and study the behavior of an elastic capsule in a microfluidic channel flow in the inertial regime. While inertial lift forces drive the capsule away from the channel center, its deformability favors migration in the opposite direction. Balancing both migration mechanisms, a deformable c…
In this work, a dynamic-Immersed--Boundary method combined with a BGK-Lattice--Boltzmann technique is developed and critically discussed. The fluid evolution is obtained on a three-dimensional lattice with 19 reticular velocities (D3Q19 computational molecule) while the immersed body surface is modeled as a collection of Lagrangian points responding to an elastic potential and a bending resistance. A moving least squares reconstruction is used to accurately interpolate flow quantities and the forcing field needed to enforce the boundary condition on immersed bodies. The proposed model is widel…
In this fluid dynamics video we show capillary rise experiments with diethyl ether in short tubes. The height of each short tube is less than the maximum height the liquid can achieve, and therefore the liquid reaches the top of the tube while still rising. Over a narrow range of heights, the ether bulges out from the top of the tube and spreads onto the external wall.
Modeling the transport of deformable capsules under different flow regimens is crucial in a variety of fields, including oil rheology, blood flow and the dispersion of pollutants. The aim of this study is twofold. Firstly, a combined Lattice Boltzmann-Immersed Boundary (LBM-IB) approach is developed for predicting the transport of inertial deformable capsules. A Moving Least Squares (MLS) scheme has been implemented to correlate the pressure, velocity and force fields of the fluid domain with the capsule dynamics. This computational strategy has been named LBM Dynamic IB. Secondly, this strate…
We analyse the effect of the Basset history force on the sedimentation or rising of inertial particles in a two-dimensional convection flow. When memory effects are neglected, the system exhibits rich dynamics, including periodic, quasi-periodic and chaotic attractors. Here we show that when the full advection dynamics is considered, including the history force, both the nature and the number of attractors change, and a fractalization of their basins of attraction appears. In particular, we show that the history force significantly weakens the horizontal diffusion and changes the speed of sedi…
This paper presents novel insights about the influence of soluble surfactants on bubble flows obtained by Direct Numerical Simulation (DNS). Surfactants are amphiphilic compounds which accumulate at fluid interfaces and significantly modify the respective interfacial properties, influencing also the overall dynamics of the flow. With the aid of DNS local quantities like the surfactant distribution on the bubble surface can be accessed for a better understanding of the physical phenomena occurring close to the interface. The core part of the physical model consists in the description of the sur…
The effects of cell size and deformability on the lateral migration and deformation of living cells flowing through a rectangular microchannel has been numerically investigated and compared with the inertial-microfluidics data on detection and separation of cells. The results of this work indicate that the cells move closer to the centerline if they are bigger and/or more deformable and that their equilibrium position is largely determined by the solvent (cytosol) viscosity, which is much less than the polymer (cytoskeleton) viscosity measured in most rheological systems. Simulations also sugg…
Influence of a vertical-wall leading edge on bouncing and escape bubble rising regimes
Universidad de Extremadura（埃斯特雷马杜拉大学）；Instituto de Computación Científica Avanzada (ICCAEx), Universidad de Extremadura（埃斯特雷马杜拉大学先进科学计算研究所）；Universidad de Jaén（哈恩大学）
Semi-analytical model for the rising sheet generated by droplet-pair impact
Institute of Thermal Science and Power Systems, School of Energy Engineering, Zhejiang University（浙江大学能源工程学院热科学和动力系统工程研究所）；State Key Laboratory of Clean Energy Utilization, Zhejiang University（浙江大学清洁能源利用国家重点实验室）；Department of Mechanical and Aerospace Engineering, Princeton University（普林斯顿大学机械与航空航天工程系）
We present an experimental study of the saturated non-linear dynamics of an inertial wave attractor in an axisymmetric geometrical setting. The experiments are carried out in a rotating ring-shaped fluid domain delimited by two vertical coaxial cylinders, a conical bottom, and a horizontal deformable upper lid as wave generator: the meridional cross-section of the fluid volume is a trapezium, while the horizontal cross-section is a ring. First, the fluid is set into a rigid-body rotation. Thereafter, forcing is introduced into the system via axisymmetric low-amplitude volume-conserving oscilla…
The collision of a rising bubble with a superhydrophilic horizontal surface is studied numerically using the Cahn-Hilliard diffuse-interface method. For the studied systems, the Bond number, $Bo=ρR^2 g/σ$, varies between 0.25 to 1.5, and the Galileo number, $Ga=ρ(R^3 g)^{1/2}/μ$, changes between 8.5 to 50. We assume that the viscosity and density of the bubble are negligible compared to the surrounding medium. We show that our computations reproduce experimentally observed dynamics for the collision of a bubble with a solid surface. Furthermore, for the studied range of parameters, the bubble-…
Deformable bodies in a 3-dimensional viscous flow: Vorticity-Stream vector formulation
Center for Interdisciplinary Research in Biology (CIRB), Collège de France, CNRS, Inserm, Université PSL（跨学科生物研究中心，法兰西学院，法国国家科学研究中心，法国国家健康与医学研究院，巴黎文理研究大学）；Facultat de Física, Universitat de Barcelona（巴塞罗那大学物理学院）；Instituto de Investigación Tecnológica (IIT) and Grupo Interdisciplinar de Sistemas Complejos (GISC), Universidad Pontificia Comillas（技术研究所和复杂系统跨学科小组，科米利亚斯宗座大学）；Institute of Nanoscience and Nanotechnology (IN2UB)（纳米科学与技术研究所）
The settling behaviour of small inertial particles in turbulent convection is a fundamental problem across several disciplines, from geophysics to metallurgy. In a geophysical context, the settling of dense crystals controls the mode of solidification of magma chambers and planetary-scale magma oceans, while rising of light bubbles of volatiles drives volcanic outgassing and the formation of primordial atmospheres. Motivated by these geophysical systems, we perform a systematic numerical study on the settling rate of particles in a rectangular two-dimensional Rayleigh-Benard system with Raylei…
We investigate the effect of microbubbles on Taylor-Couette flow by means of direct numerical simulations. We employ an Eulerian-Lagrangian approach with a gas-fluid coupling based on the point-force approximation. Added mass, drag, lift, and gravity are taken into account in the modeling of the motion of the individual bubble. We find that very dilute suspensions of small non-deformable bubbles (volume void fraction below 1%, zero Weber number and bubble Reynolds number <10) induce a robust statistically steady drag reduction (up to 20%) in the so called wavy vortex flow regime (Re = 600-2500…
