Featuring the fast response and flexibility in control allocation, an electric vehicle with in-wheel motors is a good platform for implementing advanced vehicle dynamics control. Among many active safety functions of an in-wheel motor driven vehicle (IMDV), lateral stability control is a key technology, which can be realized through torque vectoring. To further advance the lateral stabilization performance of the IMDV, in this paper a novel data-driven nonlinear model predictive control (NMPC) is proposed based the recurrent high-order neural network (RHONN) modelling method. First, the new RHONN model is developed to represent vehicle's nonlinear dynamic behaviors. Different from the conventional physics-based modelling method, the RHONN model only needs data and forms high-order polynomials. Based on the RHONN model, the steady-state responses of vehicle's yaw rate and sideslip angle are iteratively optimized and set as the control objectives for low-level controller, aiming to improve the system robustness. Besides, a nonlinear model predictive controller is designed based on the RHONN, which is expected to improve the prediction accuracy during the receding horizon control. Further, a constrained optimization problem is formulated to derive the required yaw moment for vehicle lateral dynamics stabilization. Finally, the performance of the developed RHONN-based nonlinear MPC is validated on an IMDV in the CarSim/Simulink simulation environment. The validation results show that the developed approach outperforms the conventional method, and further improves the stable margin of the system. It is able to enhance the lateral stabilization performance of the IMDV under various driving scenarios, demonstrating the feasibility and effectiveness of the proposed approach.
Case Western Reserve University（凯斯西储大学）；Nantong University（南通大学）
Autonomous electric vehicles are being widely studied nowadays as the future technology of ground transportation, while the autonomous electric vehicles based on conventional powertrain system limit their energy and power transmission efficiencies and may hinder their broad applications in future. Here we report a study on the energy consumption and efficiency improvement of a mid-size autonomous electric vehicle driven by in-wheel motors, through the development of a numerical energy model, validated with the actual driving data and implemented in a case study. The energy analysis was conduct…
Kungliga Tekniska Högskolan（瑞典皇家理工学院）；Technical University of Munich（慕尼黑工业大学）；Robert Bosch GmbH（罗伯特·博世有限公司）
Differential drive mobile robots often use one or more caster wheels for balance. Caster wheels are appreciated for their ability to turn in any direction almost on the spot, allowing the robot to do the same and thereby greatly simplifying the motion planning and control. However, in aligning the caster wheels to the intended direction of motion they produce a so-called bore torque. As a result, additional motor torque is required to move the robot, which may in some cases exceed the motor capacity or compromise the motion planner's accuracy. Instead of taking a decoupled approach, where the …
This paper presents a convex optimization framework to compute the minimum-lap-time control strategies of all-wheel drive (AWD) battery electric race cars, accounting for the grip limitations of the individual tyres. Specifically, we first derive the equations of motion (EOM) of the race car and simplify them to a convex form. Second, we leverage convex models of the electric motors (EMs) and battery, and frame the time-optimal final-drives design and EMs control problem in space domain. The resulting optimization problem is fully convex and can be efficiently solved with global optimality gua…
Formula Student vehicles are becoming increasingly complex, especially with the current shift from internal combustion engines toward electric powertrains. The interaction between software and hardware is complex and imposes additional challenges for systems integration. This paper provides a structured introduction to the OBR22 Oxford Brookes Racing Formula Student electric vehicle. From a system architecture perspective, the four-wheel drive in-hub motors topology is described. Diagrams of the hardware components, the architecture of the high voltage and communication systems are presented. …
Two of the most important aspects of electric vehicles are their efficiency or achievable range. In order to achieve high efficiency and thus a long range, it is essential to avoid over-dimensioning the drive train. Therefore, the drive train has to be kept as lightweight as possible while at the same time being utilized to the best possible extent. This can only be achieved if the dynamic behavior of the drive train is accurately known by the controller. The task of the controller is to achieve a desired torque at the wheels of the car by controlling the currents of the electric motor. With m…
In this paper, we use a nonlinear hierarchical model predictive control (MPC) to stabilize the Segway robot. We also use hardware in the loop (HIL) simulation in order to model the delay response of the wheels' motor and verify the control algorithm. In Two-Wheeled Personal Transportation Robots (TWPTR), changing the center of mass location and value, the nonlinearity of the equations, and the dynamics of the system are topics complicating the control problem. A nonlinear MPC predicts the dynamics of the system and solves the control problem efficiently, but requires the exact information of t…
This paper presents an adaptive haptic shared control framework wherein a driver and an automation system are physically connected through a motorized steering wheel. The automation system is modeled as an intelligent agent that is not only capable of making decisions but also monitoring the human's behavior and adjusting its behavior accordingly. To enable the automation system to smoothly exchange the control authority with the human partner, this paper introduces a novel self-regulating impedance controller for the automation system. To determine an optimal modulation policy, a cost functio…
