In order to perform automated calculations of defect and dopant properties in semiconductors and insulators, we developed a software package, Defect and Dopant ab-initio Simulation Package (DASP), which is composed of four modules for calculating: (i) elemental chemical potentials, (ii) defect (dopant) formation energies and transition energy levels, (iii) defect and carrier densities and (iv) carrier dynamics properties of high-density defects. DASP uses the materials genome database for quick determination of competing secondary phases and calculation of the energy above convex hull when calculating the elemental chemical potential that stabilizes compound semiconductors, so it can perform high-throughput prediction of thermodynamic stability of multinary compounds. DASP calls the ab-initio softwares to perform the total energy, structural relaxation and electronic structure calculations of the defect supercells with different structure configurations and charge states, based on which the defect formation energies and transition energy levels are calculated and the corrections for electrostatic potential alignment and image charge interaction can be included. Then DASP can calculate the equilibrium densities of defects and electron and hole carriers as well as the Fermi level in semiconductors under different chemical potential conditions and different growth/working temperature. For high-density defects, DASP can calculate the carrier dynamics properties such as the photoluminescence (PL) spectrum, defect-related radiative and non-radiative carrier capture cross sections, and recombination lifetime of non-equilibrium carriers.
We present an ab initio study of dopant-dopant interactions in beryllium-doped InGaAs. We consider defect formation energies of various interstitial and substitutional defects and their combinations. We find that all substitutional-substitutional interactions can be neglected. On the other hand, interactions involving an interstitial defect are significant. Specially, interstitial Be is stabilized by about 0.9/1.0 eV in the presence of one/two BeGa substitutionals. Ga interstitial is also substantially stabilized by Be interstitials. Two Be interstitials can form a metastable Be-Be-Ga complex …
We have used density functional theory to study the energetics and electronic structure of aluminium dopants in crystalline silicon. We present data regarding the atomic and electronic structure and properties of pairs of substitutional aluminium dopants. We find that pairs of dopants, when occupying nearest neighbouring subsitutional sites in a high spin state, can bond to form aluminium pairs. This suggests that such a configuration of dopants will be electrically active when made to occupy a high spin state, whereas in the low spin state the neighbouring dopant pairs are found to be self co…
The electronic and magnetic properties of neutral substitutional transition-metal dopants in dia- mond are calculated within density functional theory using the generalized gradient approximation to the exchange-correlation potential. Ti and Fe are nonmagnetic, whereas the ground state of V, Cr and Mn are magnetic with a spin entirely localized on the magnetic ion. For Co, Ni, and Cu, the ground state is magnetic with the spin distributed over the transition-metal ion and the nearest-neighbor carbon atoms; furthermore a bound state is found in the gap that originates from the hybridization of …
Ab-initio density functional theory (DFT) calculations of the relative stability of anatase and rutile polymorphs of TiO2 were carried using all-electron atomic orbitals methods with local density approximation (LDA). The rutile phase exhibited a moderate margin of stability of ~ 3 meV relative to the anatase phase in pristine material. From computational analysis of the formation energies of Si, Al, Fe and F dopants of various charge states across different Fermi level energies in anatase and in rutile, it was found that the cationic dopants are most stable in Ti substitutional lattice positi…
Density functional theory is used to systematically study the electronic and magnetic properties of doped MoS$_2$ monolayers, where the dopants are incorporated both via S/Mo substitution or as adsorbates. Among the possible substitutional dopants at the Mo site, Nb is identified as suitable p-type dopant, while Re is the donor with the lowest activation energy. When dopants are simply adsorbed on a monolayer we find that alkali metals shift the Fermi energy into the MoS$_2$ conduction band, making the system n-type. Finally, the adsorption of charged molecules is considered, mimicking an ioni…
Density functional theory (DFT) calculations are carried out to study the structure and electronic structure of amorphous zinc oxide (a-ZnO). The models were prepared by the "melt-quench" method. The models are chemically ordered with some coordination defects. The effect of trivalent dopants in the structure and electronic properties of a-ZnO is investigated. Models of a-X_0.375 Z_0.625 O (X=Al, Ga and In) were also prepared by the "melt- quench" method. The trivalent dopants reduce the four-fold Zn and O, thereby introducing some coordination defects in the network. The dopants prefer to bon…
Layered tin monoxide (SnO) offers an exciting two-dimensional (2D) semiconducting system with great technological potential for next-generation electronics and photocatalytic applications. Using a combination of first-principles simulations and strain field analysis, this study investigates the structural dynamics of oxygen (O) vacancies in monolayer SnO and their functionalization by complementary lightweight dopants, namely C, Si, N, P, S, F, Cl, H and H$_{2}$. Our results show that O vacancies are the dominant native defect under Sn-rich growth conditions with active diffusion characteristi…
Transport properties of permalloy doped with V, Co, Pt, and Au are explored via ab-initio calculations. The Kubo-Bastin formula is evaluated within the fully relativistic Korringa-Kohn-Rostoker Green function formalism. Finite temperature effects are treated by means of the alloy analogy model. It is shown that the fact that the host is disordered and not crystalline has a profound effect on how the conductivities characterizing the anomalous Hall effect and the spin Hall effect depend on the dopant concentration. Several relationships between quantities characterizing charge and spin transpor…
Ab initio calculations of formation energy and mixing energy for (Nd,R)2(Fe,Co)14B [R = rare-earth elements other than Nd] are presented to address the site preference of dopants and the corresponding magnetic properties. Contrasting trends between magnetic calculations and non-magnetic calculations are discussed in conjunction with the nature of localized moments in the metallic ferromagnetism at high temperatures. Implications on the optimal heat treatment temperature to maximize the intrinsic properties are discussed referring to the experimental Curie temperature.
Following the finite-temperature ab initio calculation framework based on the relativistic disordered local moments, we computationally demonstrate the possibility of doping-enhanced coercivity at high-temperatures, taking YCo$_5$ as a working material in order to extract the $3d$-electron part of the electronic structure of the rare-earth permanent magnets. Alkaline-earth dopants are shown to be the candidates to realize the proposed phenomenon.
The local magnetic moment of Ti:ZnO is calculated from first principles by using the corrected-band-gap scheme (CBGS). The results shows that the system is magnetic with the magnetization of 0.699 $μ_B$ per dopant. The origin of the local magnetic moment is considered to be the impurity band partially occupied by the donor electrons in the conduction band. Further, the impacts of applying Hubbard U to Ti-d orbital on the magnetic moment have been investigated.
We present an ab-initio based kinetic Monte Carlo model for ionic conductivity in single crystal yttria-stabilized zirconia. Ionic interactions are taken into account by combining density functional theory calculations and the cluster expansion method and are found to be essential in reproducing the effective activation energy observed in experiments. The model predicts that the effective energy barrier can be reduced by 0.15-0.25 eV by arranging the dopant ions into a super-lattice.
We consider the electronic transport properties of phosphorus (P) doped silicon nanowires (SiNWs). By combining ab initio density functional theory (DFT) calculations with a recursive Green's function method, we calculate the conductance distribution of up to 200 nm long SiNWs with different distributions of P dopant impurities. We find that the radial distribution of the dopants influences the conductance properties significantly: Surface doped wires have longer mean-free paths and smaller sample-to-sample fluctuations in the cross-over from ballistic to diffusive transport. These findings ca…
The diffusion of intrinsic defects in 3C-SiC is studied using an ab initio method based on density functional theory. The vacancies are shown to migrate on their own sublattice. The carbon split-interstitials and the two relevant silicon interstitials, namely the tetrahedrally carbon-coordinated interstitial and the <110>-oriented split-interstitial, are found to be by far more mobile than the vacancies. The metastability of the silicon vacancy, which transforms into a vacancy-antisite complex in p-type and compensated material, kinetically suppresses its contribution to diffusion processes. T…
The way doping affects the spin wave stiffness and the exchange stiffness of permalloy (Py) is investigated via ab-initio calculations, using the Korringa-Kohn-Rostoker (KKR) Green function formalism. By considering various types of dopants of different nature (V, Gd, and Pt), we are able to draw general conclusions. To describe the trends of the stiffness with doping is it sufficient to account for the exchange coupling between nearest neighbors. The polarizability of the impurities is not an important factor for the spin wave stiffness. Rather, the decisive factor is the hybridization betwee…
In this letter, the authors present a study of the energetics and magnetic interactions in Fe doped ZnO clusters by ab-initio density functional calculations. The results indicate that defects under suitable conditions can induce ferromagnetic interactions between the dopant Fe atoms whereas antiferromagnetic coupling dominates in a neutral defect-free cluster. The calculations also reveal an unusual ionic state of the dopant Fe atom residing at the surface of the cluster, a feature that is important to render the cluster ferromagnetic.
Doping Bi$_2$Se$_3$ by magnetic ions represents an interesting problem since it may break the time reversal symmetry needed to maintain the topological insulator character. Mn dopants in Bi$_2$Se$_3$ represent one of the most studied examples here. However, there is a lot of open questions regarding their magnetic ordering. In the experimental literature different Curie temperatures or no ferromagnetic order at all are reported for comparable Mn concentrations. This suggests that magnetic ordering phenomena are complex and highly susceptible to different growth parameters, which are known to a…
By means of a multi-scale first-principles approach, a description of the local electronic structure of two-dimensional and narrow phosphorene sheets with various types of modifications is presented. First, a rational argument based on the geometry of the pristine and modified P network, and supported by the Wannier functions formalism is introduced to describe a hybridization model of the P atomic orbitals. {\it Ab initio} calculations show that non-isoelectronic foreign atoms form quasi-bound states at varying energy levels and create different polarization states depending on the number of …
Anisotropic Dopant and Strain Architectures in WS$_2$ Nanocrystals Driven by Growth Kinetics
Universidade Federal de São Carlos（圣卡洛斯联邦大学）；Brazilian Synchrotron Light Laboratory (LNLS), Brazilian Center for Research in Energy and Materials (CNPEM)（巴西同步辐射光实验室（LNLS），巴西能源与材料研究中心（CNPEM））；Universidade Federal de Ouro Preto（欧鲁普雷图联邦大学）；The Pennsylvania State University（宾夕法尼亚州立大学）
A roadblock in utilizing InGaAs for scaled-down electronic devices is its anomalous dopant diffusion behavior; specifically, existing models are not able to explain available experimental data on beryllium diffusion consistently. In this paper, we propose a comprehensive model, taking self-interstitial migration and Be interaction with Ga and In into account. Density functional theory (DFT) calculations are first used to calculate the energy parameters and charge states of possible diffusion mechanisms. Based on the DFT results, continuum modeling and kinetic Monte Carlo simulations are then p…
Being a true two-dimensional crystal, graphene has special properties. In particular, a point-like defect in graphene may have effects in the long range. This peculiarity questions the validity of using a supercell geometry in an attempt to explore the properties of an isolated defect. Still, this approach is often used in ab-initio electronic structure calculations, for instance. How does this approach converge with the size of the supercell is generally not tackled for the obvious reason of keeping the computational load to an affordable level. The present paper addresses the problem of subs…
An atomistic insight into potential barrier formation and band bending at the interface between a metal and an n-type semiconductor is achieved by ab initio simulations and model analysis of a prototype Schottky diode, i.e., niobium doped rutile titania in contact with gold (Au/Nb:TiO$_2$). The local Schottky barrier height is found to vary between 0 and 1.26 eV depending on the position of the dopant. The band bending is caused by a dopant induced dipole field between the interface and the dopant site, whereas the pristine Au/TiO$_2$ interface does not show any band bending. These findings op…
A study based on density functional theory calculations was performed for the three charge states of interstitial hydrogen in Yttria. The present calculations were carried out by employing the GGA-PBE and the HSE06 exchange-correlation functional. It is observed that the ground state H$^0$ and H$^-$ configurations are similar in behaviour; these prefer to relax in the O vacant site, with limited structural relaxation. For the neutral and the negative charged systems more two different geometrical configurations occur with higher energies, which evidence the existence of metastable sites of H i…
We present results of density functional theory (DFT) calculation of the structural supermodulation in BSCCO-2212 structure, and show that the supermodulation is indeed a spontaneous symmetry breaking of the nominal crystal symmetry, rather than a phenomenon driven by interstitial O dopants. The structure obtained is in excellent quantitative agreement with recent x-ray studies, and reproduces several qualitative aspects of scanning tunnelling microscopy (STM) experiments as well. The primary structural modulation affecting the CuO_2 plane is found to be a buckling wave of tilted CuO_5 half-oc…
We have performed the numerical modeling of Ge(111)-(2x1) surface electronic properties in vicinity of P donor impurity atom located near the surface. We have found a notable increase of surface $LDOS$ around surface dopant near the bottom of empty surface states band $π^*$, which we called split state due to its limited spatial extent and energetic position inside the band gap. We show, that despite of well established bulk donor impurity energy level position at the very bottom of conduction band, surface donor impurity on Ge(111)-(2x1) surface might produce energy level below Fermi energy, …
The power factor of pure p-type ZnSb has been calculated via ab initio simulations assuming that the carrier concentrations are due to the doping effect of intrinsic zinc vacancies. With a vacancy concentration close to the experimental solubility limit we were able to perfectly reproduce the Power Factor measured in polycrystalline ZnSb samples. The methodology has then been successfully extended for predicting the effect of extrinsic doping elements on the thermoelectric properties of ZnSb. Germanium and tin seem to be promising p-type doping elements. In addition, we give, for the first tim…
