Nickel-based layered oxides offer an attractive platform for the development of energy-dense cobalt-free cathodes for lithium-ion batteries but suffer from degradation via oxygen gas release during electrochemical cycling. While such degradation has previously been characterized phenomenologically with experiments, an atomic-scale understanding of the reactions that take place at the cathode surface has been lacking. Here, we develop a first-principles methodology for the prediction of the surface reconstructions of intercalation electrode particles as a function of the temperature and state of charge. We report the surface phase diagrams of the LiNiO2(001) and (104) surfaces and identify surface structures that are likely visited during the first charge and discharge. Our calculations indicate that both surfaces experience oxygen loss during the first charge, resulting in irreversible changes to the surface structures. At the end of charge, the surface Ni atoms migrate into tetrahedral sites, from which they further migrate into Li vacancies during discharge, leading to Li/Ni mixed discharged surface phases. Further, the impact of the temperature and voltage range during cycling on the charge/discharge mechanism is discussed. The present study thus provides insight into the initial stages of cathode surface degradation and lies the foundation for the computational design of cathode materials that are stable against oxygen release.
LiFePO4-based cathodes suffer from various degradation mechanisms which influences the battery performance. In this paper morphological and structural degradation phenomena in laboratory cathodes made of LiFePO4 (LFP) mixed with carbon black (CB) in an 1 mol L-1 LiPF6 in EC:DMC (1:1 by weight) electrolyte are investigated by transmission electron microscopy (TEM) at various preparation, assembling, storage and cycling stages. High-resolution TEM (HRTEM) imaging shows that continuous SEI layers are formed on the LFP particles and that both storage and cycling affects the formation. Additionally…
This study of highly accelerated lifetime tests of SrTiO$_3$, a model semiconducting oxide, is motivated by the interest in reliable multilayer ceramic capacitors and resistance-switching thin-film devices. Our analytical solution to oxygen-vacancy migration under a DC voltage -- the cause of resistance degradation in SrTiO$_3$ -- agrees with previous numerical solutions. However, all solutions fail to explain why degradation kinetics feature a very strong voltage dependence, which we attribute to the nucleation and growth of cathode-initiated fast-conducting needles. While they have no color …
In this work we outline the mechanisms contributing to the oxygen reduction reaction in nanostructured cathodes of La0.8Sr0.2MnO3 (LSM) for Solid Oxide Fuel Cells (SOFC). These cathodes, developed from LSM nanostructured tubes, can be used at lower temperatures compared to microstructured ones, and this is a crucial fact to avoid the degradation of the fuel cell components. This reduction of the operating temperatures stems mainly from two factors: i) the appearance of significant oxide ion diffusion through the cathode material in which the nanostructure plays a key role and ii) an optimized …
Layered LiMO2 (M = Ni, Co, Mn, and Al mixture) cathode materials used for Li-ion batteries are reputed to be highly reactive through their surface, where the chemistry changes rapidly when exposed to ambient air. However, conventional electron/spectroscopy-based techniques or thermogravimetric analysis fails to capture the underlying atom-scale chemistry of vulnerable Li species. To study the evolution of the surface composition at the atomic scale, here we use atom probe tomography and probed the surface species formed during exposure of a LiNi0.8Mn0.1Co0.1O2 (NMC811) cathode material to air.…
Boron-doped graphene was reported to be the best non-metal doped graphene electrocatalyst for the oxygen reduction reaction (ORR) working at an onset potential of 0.035 V [JACS 136 (2014) 4394]. In the present DFT study, intermediates and transition structures along the possible reaction pathways are determined. Both Langmuir-Hinschelwood and Eley-Rideal mechanisms are discussed. Molecular oxygen binds the positively charged B atom and forms an open shell end-on dioxygen intermediate. The associative path is favoured with respect to the dissociative one. The free energy diagrams along the four…
Li-O$_2$ batteries (LOB) performance degradation ultimately occurs through the accumulation of discharge products and irreversible clogging of the porous electrode during the cycling. Electrode binder degradation in the presence of reduced oxygen species can result in additional coating of the conductive surface, exacerbating capacity fading. Herein, we establish a facile method to fabricate free-standing, binder-free electrodes for LOBs in which multi-wall carbon nanotubes (MWCNT) form cross-linked networks exhibiting high porosity, conductivity, and flexibility. These electrodes demonstrate …
Data-efficient crack quantification in lithium-ion cathodes using foundation model transfer
RWTH Aachen University（亚琛工业大学）；Honda Research Institute Europe GmbH（本田欧洲研究院）；Zenules GmbH（Zenules有限公司）；Honda Research Institute USA, Inc.（本田美国研究院）；Juelich Aachen Research Alliance, JARA-Energy（于利希-亚琛研究联盟JARA能源分部）
Direct evidence of low work function on SrVO$_3$ cathode using thermionic electron emission microscopy and high-field ultraviolet photoemission spectroscopy
We present a refined Mn-Zn-H$_2$O Pourbaix diagram with the emphasis on parameters relevant for the Zn/MnO$_2$ rechargeable cells. It maps out boundaries of electrochemical stability for MnO$_2$, ZnMn$_2$O$_4$, ZnMn$_3$O$_7$, and MnOOH. The diagram helps to rationalize experimental observation on processes and phases occurring during charge/discharge, including the position of charge/discharge redox peaks and capacity fade observed in rechargeable aqueous Zn-ion batteries for stationary storage. The proposed Pourbaix diagram is validated by observing the pH-dependent transformation of electrol…
Spinel Li$_x$Mn$_2$O$_4$ is a key cathode material that is used extensively in commercial Li-ion batteries. A challenge with this material has been that the capacity of the battery fades with cycling, an effect that can be traced to the presence of an anti-ferromagnetic insulator phase in the fully lithiated LiMn$_2$O$_4$ (LMO) and the associated charge disproportionation that drives distortions of the MnO$_6$ octahedra. Here, by combining x-ray magnetic Compton scattering experiments with parallel first-principles computations, we show that the anti-ferromagnetic phase of LMO is surrounded by…
Wide proliferation of low temperature hydrogen fuel cell systems, a key part of the hydrogen economy, is hindered by degradation of the platinum cathode catalyst. Here, we provide a device level assessment of the molecular scale catalyst degradation phenomena, using advanced operando X-ray scattering tomography tailored for device-scale imaging. Each cell component, including the catalyst, carbon support, polymer electrolyte, and liquid water can be simultaneously mapped, allowing for deep correlative analysis. Chemical and thermal gradients formed inside the operating fuel cell produce highly…
Decoding Oxygen K-edge Fingerprints of NCM-811 Degradation via Ab Initio Many-Body Theory and High-Throughput Screening of Crystal Proxies
Carl von Ossietzky Universit\"at Oldenburg, Institute of Physics, 26129 Oldenburg, Germany；Department Interface Design, Helmholtz-Zentrum Berlin f\"ur Materialien und Energie GmbH, Berlin, Germany；Friedrich-Schiller-Universit\"at Jena, Institute of Condensed Matter Theory
Non-aqueous metal-oxygen batteries depend critically on the reversible formation/decomposition of metal oxides on cycling. Irreversible parasitic reactions cause poor rechargeability, efficiency, and cycle life and have predominantly been ascribed to the reactivity of reduced oxygen species with cell components. These species, however, cannot fully explain the side reactions. Here we show that singlet oxygen forms at the cathode of a lithium-oxygen cell during discharge and from the onset of charge, and accounts for the majority of parasitic reaction products. The amount increases during disch…
The charge density wave (CDW) state in van der Waals systems shows interesting scaling phenomena as the number of layers can significantly affect the CDW transition temperature, $T_{CDW}$. However, it is often difficult to use conventional methods to study the phase transition in these systems due to their small size and sensitivity to degradation. Degradation is an important parameter which has been shown to greatly influence the superconductivity in layered systems. Since the CDW state competes with the onset of superconductivity, it is expected that $T_{CDW}$ will also be affected by the de…
Direct Evidence of Metal-Ligand Redox in Li-ion Battery Positive Electrodes
WMG, University of Warwick（华威大学WMG学院）；The Faraday Institution（法拉第研究所）；School of Science and Engineering, University of Dundee（邓迪大学科学与工程学院）；School of Metallurgy and Materials, University of Birmingham（伯明翰大学冶金与材料学院）；University College Dublin（都柏林大学学院）；Max Planck Institute for Solid State Research（马克斯·普朗克固体研究所）
Manganese oxides have received much attention over the years among the wide range of electrocatalysts for the oxygen evolution reaction (OER) due to their low toxicity, high abundance and rich redox chemistry. While many previous studies focused on the activity of these materials, a better understanding of the material transformations relating to activation or degradation is highly desirable, both from a scientific perspective and for applications. We electrodeposited Na-containing MnOx without long-range order from an alkaline solution to investigate these aspects by cyclic voltammetry, scann…
