arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2111.14972cs.RO
收藏

足式机器人的恢复系统设计与控制

Design and Control of a Recovery System for Legged Robots

University of Michigan(密歇根大学)

Kevin Green, Nils Smit-Anseeuw, Rodney Gleason, C. David Remy

摘要:

本文介绍了平面足式机器人的支撑和恢复系统的设计和控制。该系统以三种模式运行。首先,它可以在完全透明的模式下操作,没有力施加到机器人上。在这种模式下,系统紧密跟随机器人,以便在需要时能够快速抓住机器人。其次,它可以提供垂直支撑力,以帮助机器人在操作过程中。第三,它可以抓住机器人,并在失败后将其拉离地面,以避免跌倒和相关的损坏。在这种模式下,系统在试验后自动重置机器人,允许在没有人工干预的情况下进行多个连续试验。支持力通过驱动电缆和滑轮系统施加到机器人上,该系统使用具有单向弹簧的串联弹性驱动,以实现真正透明的操作。该系统的非线性性质需要仔细设计控制器,以确保可预测的,安全的行为。在本文中,我们介绍了机电一体化设计的恢复系统,开发合适的控制器,并评估系统的性能的双足机器人RAMone。

英文摘要:

This paper describes the design and control of a support and recovery system for use with planar legged robots. The system operates in three modes. First, it can be operated in a fully transparent mode where no forces are applied to the robot. In this mode, the system follows the robot closely to be able to quickly catch the robot if needed. Second, it can provide a vertical supportive force to assist a robot during operation. Third, it can catch the robot and pull it away from the ground after a failure to avoid falls and the associated damages. In this mode, the system automatically resets the robot after a trial allowing for multiple consecutive trials to be run without manual intervention. The supportive forces are applied to the robot through an actuated cable and pulley system that uses series elastic actuation with a unidirectional spring to enable truly transparent operation. The nonlinear nature of this system necessitates careful design of controllers to ensure predictable, safe behaviors. In this paper we introduce the mechatronic design of the recovery system, develop suitable controllers, and evaluate the system's performance on the bipedal robot RAMone.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑