颗粒物料在螺旋输送机中的流动分析
Analysis of the flow of granular materials through a screw conveyor
摘要:
螺旋输送机在工业上广泛用于颗粒材料的散装运输。一些研究试图通过实验和粒子动力学模拟将排出速率与螺杆的旋转速度相关联。然而,一个详细的机械模型,将有助于螺旋输送机的优化设计还没有尝试。在这项研究中,我们首先构建了一个简单的模型,假设整个颗粒介质作为一个刚体沿着螺杆和机筒的表面滑动。通过强制执行的平衡线和角动量一个适当选择的连续体元素,我们表明,在一定的限制条件下,可以得到一个给定的角速度和螺旋几何的放电率。此外,我们表明,可以通过设置的螺距与桶直径的比率,以一个特定的值最大化的放电。然后,我们使用离散元方法,它揭示了一个显着的一部分材料表现出固体运动,在协议的简单模型内的输送机的详细流量。我们评估放松模型中采用的限制条件的效果,从而确定在壁的摩擦和流动的运动学之间的连接。最后,在重力的存在下,平均轴向速度与螺距与桶直径比的变化趋势进行了比较,从我们的模型和模拟在没有重力。我们观察到,这两种趋势是定性相同的,表明平均轴向速度对输送机的几何形状的依赖性不会被重力的引入所改变。
英文摘要:
Screw conveyors are widely employed in industry for the bulk transport of particulate materials. Several studies have attempted to correlate the discharge rate with the rotation speed of the screw via experiments and particle dynamics simulations. However, a detailed mechanical model that would assist in the optimal design of screw conveyors has not been attempted. In this study, we first construct a simple model that assumes the entire granular medium to move as a rigid body sliding along the surfaces of the screw and barrel. By enforcing the balances of linear and angular momentum to a suitably chosen continuum element, we show that under certain limiting conditions, the discharge rate for a given angular velocity and screw geometry can be obtained. Further, we show that the discharge can be maximized by setting the ratio of the pitch to barrel diameter to a particular value. We then study the detailed flow within the conveyor using the Discrete Element Method, which reveals that a significant fraction of the material exhibits solid body motion, in agreement with the simple model. We assess the effect of relaxing the limiting conditions employed in the model, thereby determining the connection between the friction at the walls and the kinematics of flow. Finally, the trend in variation of average axial velocity with the pitch to barrel diameter ratio in the presence of gravity is compared with that from our model and simulations in the absence of gravity. We observe that both the trends are qualitatively the same indicating that the dependence of average axial velocity on the geometry of the conveyor is not altered by the introduction of gravity.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。