Eun Jung Kim, Stefan Kratsch, Marcin Pilipczuk, Magnus Wahlström
备注：
v2. Major update of three flow-augmentation papers. Includes a deterministic version. Weighted Almost 2-SAT algorithm has been removed, as it is superseded by a more general algorithm of Flow-Augmentation III (arXiv:2207.07422)
We show a flow-augmentation algorithm in directed graphs: There exists a randomized polynomial-time algorithm that, given a directed graph $G$, two vertices $s,t \in V(G)$, and an integer $k$, adds (randomly) to $G$ a number of arcs such that for every minimal $st$-cut $Z$ in $G$ of size at most $k$, with probability $2^{-\mathrm{poly}(k)}$ the set $Z$ becomes a minimum $st$-cut in the resulting graph. We also provide a deterministic counterpart of this procedure.
The directed flow-augmentation tool allows us to prove fixed-parameter tractability of a number of problems parameterized by the cardinality of the deletion set, whose parameterized complexity status was repeatedly posed as open problems: (1) Chain SAT, defined by Chitnis, Egri, and Marx [ESA'13, Algorithmica'17], (2) a number of weighted variants of classic directed cut problems, such as Weighted $st$-Cut} or Weighted Directed Feedback Vertex Set. By proving that Chain SAT is FPT, we confirm a conjecture of Chitnis, Egri, and Marx that, for any graph $H$, if the List $H$-Coloring problem is polynomial-time solvable, then the corresponding vertex-deletion problem is fixed-parameter tractable.
I extend the methods in "Electrical Flows, Laplacian Systems, and Faster Approximation of Maximum Flow in Undirected Graphs, with Paul Christiano, Jonathan Kelner, Daniel Spielman, and Shang-Hua Teng" to directed graphs with a variation of the framework in the paper, which lead to an algorithm that approximately solves the directed max flow problem in nearly-linear time.
We develop a new technique for computing maximum flow in directed planar graphs with multiple sources and a single sink that significantly deviates from previously known techniques for flow problems. This gives rise to an O(diameter*n*log(n)) algorithm for the problem.
One of the first application of the recently introduced technique of \emph{flow-augmentation} [Kim et al., STOC 2022] is a fixed-parameter algorithm for the weighted version of \textsc{Directed Feedback Vertex Set}, a landmark problem in parameterized complexity. In this note we explore applicability of flow-augmentation to other weighted graph separation problems parameterized by the size of the cutset. We show the following. -- In weighted undirected graphs \textsc{Multicut} is FPT, both in the edge- and vertex-deletion version. -- The weighted version of \textsc{Group Feedback Vertex Set} i…
We give an $O(n^{1.5} \log n)$ algorithm that, given a directed planar graph with arc capacities, a set of source nodes and a single sink node, finds a maximum flow from the sources to the sink . This is the first subquadratic-time strongly polynomial algorithm for the problem.
We give an O(n log^3 n) algorithm that, given an n-node directed planar graph with arc capacities, a set of source nodes, and a set of sink nodes, finds a maximum flow from the sources to the sinks. Previously, the fastest algorithms known for this problem were those for general graphs.
We give an $O(n^{1.5} \log n)$ algorithm that, given a directed planar graph with arc capacities, a set of source nodes and a set of sink nodes, finds a maximum flow from the sources to the sinks.
In this paper we present an O(n log n) algorithm for finding a maximum flow in a directed planar graph, where the vertices are subject to capacity constraints, in addition to the arcs. If the source and the sink are on the same face, then our algorithm can be implemented in O(n) time. For general (not planar) graphs, vertex capacities do not make the problem more difficult, as there is a simple reduction that eliminates vertex capacities. However, this reduction does not preserve the planarity of the graph. The essence of our algorithm is a different reduction that does preserve the planarity,…
A subset $T \subseteq V$ of terminals is $k$-connected to a root $s$ in a directed/undirected graph $J$ if $J$ has $k$ internally-disjoint $vs$-paths for every $v \in T$; $T$ is $k$-connected in $J$ if $T$ is $k$-connected to every $s \in T$. We consider the {\sf Subset $k$-Connectivity Augmentation} problem: given a graph $G=(V,E)$ with edge/node-costs, node subset $T \subseteq V$, and a subgraph $J=(V,E_J)$ of $G$ such that $T$ is $k$-connected in $J$, find a minimum-cost augmenting edge-set $F \subseteq E \setminus E_J$ such that $T$ is $(k+1)$-connected in $J \cup F$. The problem admits tr…
Minimum cuts have been closely related to shortest paths in planar graphs via planar duality - so long as the graphs are undirected. Even maximum flows are closely related to shortest paths for the same reason - so long as the source and the sink are on a common face. In this paper, we give a correspondence between maximum flows and shortest paths via duality in directed planar graphs with no constraints on the source and sink. We believe this a promising avenue for developing algorithms that are more practical than the current asymptotically best algorithms for maximum st-flow.
A weakness of next-hop routing is that following a link or router failure there may be no routes between some source-destination pairs, or packets may get stuck in a routing loop as the protocol operates to establish new routes. In this article, we address these weaknesses by describing mechanisms to choose alternate next hops. Our first contribution is to model the scenario as the following {\sc tree augmentation} problem. Consider a mixed graph where some edges are directed and some undirected. The directed edges form a spanning tree pointing towards the common destination node. Each directe…
Fixed-parameter tractability of Directed Multicut with three terminal pairs parameterized by the size of the cutset: twin-width meets flow-augmentation
We give an algorithm to find a mincut in an $n$-vertex, $m$-edge weighted directed graph using $\tilde O(\sqrt{n})$ calls to any maxflow subroutine. Using state of the art maxflow algorithms, this yields a directed mincut algorithm that runs in $\tilde O(m\sqrt{n} + n^2)$ time. This improves on the 30 year old bound of $\tilde O(mn)$ obtained by Hao and Orlin for this problem.
Connectivity augmentation problems are among the most elementary questions in Network Design. Many of these problems admit natural $2$-approximation algorithms, often through various classic techniques, whereas it remains open whether approximation factors below $2$ can be achieved. One of the most basic examples thereof is the Weighted Connectivity Augmentation Problem (WCAP). In WCAP, one is given an undirected graph together with a set of additional weighted candidate edges, and the task is to find a cheapest set of candidate edges whose addition to the graph increases its edge-connectivity…
The multi-commodity flow-cut gap is a fundamental parameter that affects the performance of several divide \& conquer algorithms, and has been extensively studied for various classes of undirected graphs. It has been shown by Linial, London and Rabinovich \cite{linial1994geometry} and by Aumann and Rabani \cite{aumann1998log} that for general $n$-vertex graphs it is bounded by $O(\log n)$ and the Gupta-Newman-Rabinovich-Sinclair conjecture \cite{gupta2004cuts} asserts that it is $O(1)$ for any family of graphs that excludes some fixed minor. The flow-cut gap is poorly understood for the case o…
We give O(log^2 n)-approximation algorithm based on the cut-matching framework of [10, 13, 14] for computing the sparsest cut on directed graphs. Our algorithm uses only O(log^2 n) single commodity max-flow computations and thus breaks the multicommodity-flow barrier for computing the sparsest cut on directed graphs
We present a linear-time algorithm for simplifying flow networks on directed planar graphs: Given a directed planar graph on $n$ vertices, a source vertex $s$ and a sink vertex $t$, our algorithm removes all the arcs that do not participate in any simple $s,t$-path in linear-time. The output graph produced by our algorithm satisfies the prerequisite needed by the $O(n\log n)$-time algorithm of Weihe [FOCS'94 \& JCSS'97] for computing maximum $s,t$-flow in directed planar graphs. Previously, Weihe's algorithm could not run in $O(n\log n)$-time due to the absence of the preprocessing step; all t…
We examine directed spanners through flow-based linear programming relaxations. We design an $Õ(n^{2/3})$-approximation algorithm for the directed $k$-spanner problem that works for all $k\geq 1$, which is the first sublinear approximation for arbitrary edge-lengths. Even in the more restricted setting of unit edge-lengths, our algorithm improves over the previous $Õ(n^{1-1/k})$ approximation of Bhattacharyya et al. when $k\ge 4$. For the special case of $k=3$ we design a different algorithm achieving an $Õ(\sqrt{n})$-approximation, improving the previous $Õ(n^{2/3})$. Both of our algorithms e…
We study the maximum flow problem in directed H-minor-free graphs where H can be drawn in the plane with one crossing. If a structural decomposition of the graph as a clique-sum of planar graphs and graphs of constant complexity is given, we show that a maximum flow can be computed in O(n log n) time. In particular, maximum flows in directed K_{3,3}-minor-free graphs and directed K_5-minor-free graphs can be computed in O(n log n) time without additional assumptions.
We give an almost-linear time algorithm for the Steiner connectivity augmentation problem: given an undirected graph, find a smallest (or minimum weight) set of edges whose addition makes a given set of terminals $τ$-connected (for any given $τ> 0$). The running time of our algorithm is dominated by polylogarithmic calls to any maximum flow subroutine; using the recent almost-linear time maximum flow algorithm (Chen et al., FOCS 2022), we get an almost-linear running time for our algorithm as well. This is tight up to the polylogarithmic factor even for just two terminals. Prior to our work, a…
